Bosch Rexroth Corporation    Hoffman Estates, IL 60192-3707
May 21, 2013 Using high-performance polymers to minimize weight, Advanced Valve AV03 Systems fulfill engineers' demands for customized automation solutions. Valve components are arranged at an angle to cut space requirements, while supply and exhaust channels are optimized to minimize flow losses. AV03 Systems can control up to 24 coils with 25-pin D-sub connection, up to 40 coils with 44-pin D-sub connection, and up to 128 coils with Field bus connection.

Clark Solutions    Hudson, MA 01749
May 10, 2013 Available in choice of wetted materials suitable for use with aggressive media being transferred at temperatures from 5 to 50°C, WTA-2 series are solenoid operated, feature PTFE isolation diaphragms, and Perfluor or Viton® soft seal valve seat design. Elastomeric seals resist damage from particulate matter, accommodating analytical and clinical chemistry applications. While Model WTA-2R valves have molded PPS bodies, Model WTA-2K valves are designed with molded PEEK bodies.

Emerson Process Management    Knoxville, TN 37932
May 09, 2013 To simplify daily work practices, FieldQ™ rack and pinion valve actuator and controls utilize FieldQ Foundation Fieldbus v3, with device diagnostic alarm management in flexible modular package. Diagnostic alarm tools enable users to categorize and prioritize device alarms on criticality of device and severity of problem detected. Alarm settings can be configured to alert appropriate plant personnel so they can take action without being distracted by irrelevant alarms.

Roto-Disc Co.    Cincinnati, OH 45226
May 07, 2013 Roto-Clean incorporates features of Roto-Disc valve in sanitary, quick-clean design that can be disassembled and reassembled, by hand, within minutes. With each cycle, valve wipes itself clean while slicing through sticky, gummy material buildup. All product contact surfaces are constructed of FDA-compliant materials, and there are no internal hang-up points for material to collect and spoil. Valve suits applications that require frequent cleaning of processing equipment.

Swagelok Company    Solon, OH 44139-3492
May 02, 2013 Suitable for surface and subsea installation, instrumentation, injection, and sampling systems, IPT series medium- and high-pressure products are made standard from cold worked, 316 stainless steel; annealed 316 stainless steel and other corrosion-resistant special alloys are available to meet NACE MR0175/ISO 15156 requirements. Series comprises check valves, trunnion ball valves, relief valves, needle valves, tubing and nipples, coned and thread connections, and coning and threading kits.

NLB Corporation    Wixom, MI 48393 2824
May 02, 2013 Featuring quick-change, stainless steel cartridge for 5-minute field repair, Model MGV24-1200 allows 2 or more high-pressure water jet lances or other accessories to be operated from same 24,000 psi pump unit. Valve operates at flows up to 24 gpm, can be used with any dump-style lance, and includes cam-lock pressure adjuster that locks pressure without tools. With modular design, MGV24-1200 can accommodate additional bodies to supply more lances.

Qosina Corp.    Edgewood, NY 11717 8329
Apr 30, 2013 Part #80451 orange, #80452 green, and #80453 gray Hemostasis Valves have 7.5 in. long sideport tubing that connects units to 3-way stopcock. Products also feature automatic pre-slit seal for items sized 0-0.105 in. with 0-2.7 mm dia. Included rotating male luer lock has vented female luer lock cap, while stopcock has 2 female luers, tube connection, and male luer lock cap. Pre-assembled components are non-sterile.

Parker Hannifin Corp., Instrumentation Connectors Div.    Huntsville, AL 35803-2197
Apr 26, 2013 With modular design that facilitates maintenance, Gen II R-max™ offers backward compatibility so that features can be installed on existing R-max units – available in NC, NO, and single 3-way configurations. Captured vent prevents cross-contamination, and position indicator helps accelerate recognition of valve actuation. Featuring atmospheric reference vent module and surface mount technology, system is designed to control gases and liquids in analytical systems from vacuum to 500 psig.

Spirax Sarco, Inc.    Blythewood, SC 29016
Apr 18, 2013 Engineered for industrial use, SV418 is rated to ASME and National Board Certified standards for Section VIII service – 750 psi for liquid, air, and gas and 300 psi for steam. Multiple-purpose safety relief valve, available in sizes from ½–3 in., is suited for use where quick, accurate reseating and minimal blow-down (or loss of medium) is important and high capacity is required. Applications include but are not limited to pumping stations, water-works, compressors, and accumulators.

Emerson Process Management    Austin, TX 78754
Apr 11, 2013 Remote-mount digital valve controller, Fisher® FIELDVUE™ DVC6205, serves applications where accessibility, temperatures up to 250°F, vibration, or confined space make integral mounting difficult or impractical. Only valve position feedback is mounted on control valve, while remainder of digital valve controller can be mounted 300+ ft away in less severe or more accessible environment. Remote valve mounted feedback unit utilizes FIELDVUE linkage-less, non-contact feedback technology.

Fisnar Inc.    Wayne, NJ 07470
Apr 05, 2013 Available in 3, 12, and 18 mm spray paths, SV2000N minimum overspray valves are suitable for urethanes, flux, and silicone coatings. Valves are actuated by air pressure sequenced by SVC100 controller. Air pressure opens needle in valve allowing material to flow, while separate air-line creates pressure in valve exit cap, atomizing fluid. Controller sequences time relationship between fluid start signal and atomizing signal, which is critical in cleaning spray nozzle after each spray cycle.

Nordson Corp., Packaging Systems    Duluth, GA 30097
Apr 04, 2013 Utilizing high-speed solenoid technology, LA 725 and LA 725-S Pneumatic Guns provide continuous or intermittent operation in variety of paper and paperboard applications. Applicators feature frictionless operation, quick-change components, and advanced seal technology that is resistant to most chemicals in water-based adhesives. Snuff-back technology delivers sharp, clean cutoff as excess adhesive is pulled back into applicator.

Techcon Systems    Garden Grove, CA 92841
Apr 04, 2013 Capable of producing 300 precise droplets per second, TS9200D Series Non-Contact Jet Tech Valve features single, replaceable diaphragm that eliminates dynamic fluid seals found in other jets. Diaphragm design minimizes energy needed to eject drop of fluid and is adjustable, providing users with wide process window.

MICO, Inc.    North Mankato, MN 56002
Mar 28, 2013 Designed for use with MICO MOBEUS EH brake systems on agriculture and other off-highway vehicles and trailers, Model LAV proportions trailer brake pressure utilizing tow vehicle’s hydraulic brake signal in conjunction with real-time trailer load sensing to continuously control pressure-reduction braking without utilization of tank-pressure. Result is load sensitive trailer braking that minimizes occurrence of trailer wheel lock-up or skidding.

Clippard Instrument Laboratory, Inc.    Cincinnati, OH 45239
Mar 21, 2013 Interfacing with electric and electronic circuits, Minimatic® Electronic Valves are 2-way Normally Closed control valves with no sliding parts. Complete poppet travel is 0.007 in., minimizing power consumption. Manifold and in-line mounting are available as well as many different electrical connection styles. Oxygen Clean and Analytical versions are also offered as well as FKM, EPR, and Silicone seals and diodes. Flow rates of 1.1 scfm at 50 psig and 0.95 scfm at 25 psig are optional.

Bradley Corp.    Menomonee Falls, WI 53051
Mar 13, 2013 Combining sink, faucet, and dual-sided hand dryer, Advocate® AV-Series provides sustainable hand-washing solution that helps prevent unsafe floors by eliminating need for person to move from sink to hand dryer with wet hands. Commercial ADA-compliant system is made with Terreon® solid surface material, which is GREENGUARD certified as low-emitting material. Hygienic infrared 0.38 gpm faucet cuts water usage by 24%, while infrared hand dryer rids moisture on hands in less than 15 seconds.

Kingston    Torrance, CA 90501
Feb 28, 2013 Certified for ASME Section VIII Air/Gas/Steam applications, Model 710 integrates fully guided stem and seat pocket for optimal re-seating accuracy. Unit is available in ½–1 in. NPT sizes with ratings of 5–400 psig and -150 to 406°F. In addition to full lift design, unit includes fixed optimized blowdown and stainless steel spring. Typical applications include compressors and dryers, pressure accumulation tanks, piping systems, and industrial/chemical/power plant infrastructure.

Promation Engineering, Inc.    Brooksville, FL 34604
Feb 04, 2013 Designed for use on rising stem globe control valves, PL Series delivers up to 4,400 lb of force and up to 3.9 in. of travel. Travel stops can be set by location within stroke or by rated force at end of stroke. Providing On/Off/Floating/Proportional Control, microcontroller has 4–20 mA or 2–10 Vdc input and feedback, AutoCalibration, and flashing LED diagnostic indicators. Industrial-grade actuators are compatible with 24 Vac, 24 Vdc, 120 Vac, and 230 Vac power supplies.

ABB Inc.    Auburn Hills, MI 48326
Feb 04, 2013 Featuring embedded pole technology, R-MAG Outdoor Vacuum Circuit Breaker is capable of interrupting up to 40 kA at 38 kV with single vacuum interrupter per phase. Magnetic actuator has only one moving part and requires no regular maintenance. Embedded in solid insulating material, breaker is insulated from external effects of mechanical shock, dust, and humidity. It offers extended capabilities of 10,000 load operations, which is 5x IEEE requirements for endurance capabilities.

Valco Instrument Co., Inc.    Houston, TX 77255
Jan 24, 2013 Microvolume Diaphragm Valve is designed for trouble-free use in such applications as process industry, automated lab analyzers, and continuous-monitoring environmental analyses. Available configurations include 4-port internal loop sample injector, 6-port external loop sampling/switching valve, and 10-port multifunctional diaphragm valve. Lifetime for DV22 can exceed 1,000,000 cycles at ambient temperature/300 psi or 500,000 cycles at 175°C/300 psi.