Bosch Rexroth Corporation    Hoffman Estates, IL 60192-3707
May 21, 2013 Using high-performance polymers to minimize weight, Advanced Valve AV03 Systems fulfill engineers' demands for customized automation solutions. Valve components are arranged at an angle to cut space requirements, while supply and exhaust channels are optimized to minimize flow losses. AV03 Systems can control up to 24 coils with 25-pin D-sub connection, up to 40 coils with 44-pin D-sub connection, and up to 128 coils with Field bus connection.

Harvard Apparatus, Inc.    Holliston, MA 01746 1371
May 21, 2013 Holding up to 4 syringes, CMA 4004 Syringe Pump delivers flow rates from 0.54 pL/min to 11.70 mLpm for applications requiring accurate flow. Product features touchscreen user interface in addition to syringe library that includes most common syringes used for microdialysis.

Zep Manufacturing Company of Canada Inc.    Atlanta, GA 30318
May 20, 2013 Suited for use as broadcast or spot treatment on ornamental lawns and turf grasses, Enforcer® Weed Shot uses 2,4-D, dimethylamine salt to kill broadleaf weeds and begins to work overnight. Active ingredients mimic weeds' growth hormones, which causes deformed growth in weeds' vascular systems and kills weeds down to roots. This concentrated herbicide and treat 950 ft² of lawn with 5–6 oz diluted into 5 gal of water. Other uses include controlling brush and vines along roads.

Enerpac (Industrial Tools)    Milwaukee, WI 53201 3241
May 20, 2013 Engineered to meet torque application requirements of wind turbine industry in addition to those of general bolting applications, TQ700 operates from 82–85 dBA and features aluminum structural components. Optimized Flow Technology, which consists of 3 separate oil flow stages – each maximized for distinct portion of bolt tightening process, ensures more oil flows at appropriate time and volume. Standard features include roll cage and 20 ft pendant for control of integrated 1 hp IEC motor.

GE    Houston, TX 77029
May 16, 2013 Designed to allow simultaneous frac operations on multiple well pads, skid-mounted Modular Frac Manifold consists of customized array of actuated valves, blocks, and frac head outlets. Self-contained unit is engineered to safely isolate each well during stimulation. Hand wheel is ergonomically designed at stand level within safety zone to minimize restrictive movements. Double-acting hydraulic actuator ensures proper flow control and shut off even if hydraulic system has been interrupted.

Industrial Innovations, Inc.    Wyoming, MI 49519
May 15, 2013 Featuring 99.5% drip-free design, Z-Nozzle has magnetic base that secures nozzle tightly to its mount, yet can be removed and repositioned as needed. Unit is available in brass, stainless, or plastic with tubing choices of 1/8, 3/16, and ¼ in. diameter. Designed to work with Spra-Rite spray lubrication system, Z-Nozzle combines low pressure with high velocity. Fluid application is controlled through pressure, time, degree of pattern, and electronic programming of HMI.

Spraying Systems Co.    Wheaton, IL 60189
May 15, 2013 Featuring unique vane design and maximum free passage, MFP FullJet Nozzles now include 1 ½, 2, 2 ½, and 3 in. sizes for applications with flow rates up to 705 gpm and 80 psi. All are available in 316 stainless steel, and sizes up to 1 ¼ in. are also available with brass bodies. Producing uniform, full cone spray pattern, nozzles are suited applications that are affected by clogging due to recirculated liquids or debris, such as process/gas cooling, flue gas desulfurization, and food processing.

FIPA, Inc.    Atlanta, GA 30318
May 14, 2013 Intended for pick and place robotics applications, vacuum generator uses suction cups for dynamic handling tasks. Blow-off flow is supplied via compressed air line as well as from ambient air, and blow-off boost enables precise and cautious deposit of workpieces in milliseconds. Rate of vacuum build up and dissipation accelerate gripping and placing, and each suction cup can be supplied with its own ejector. Solenoid valve withstands 100+ million switching operations.

Clark Solutions    Hudson, MA 01749
May 13, 2013 Featuring chemical resistant wetted components, including FKM seals, valves, and diaphragms and POM pump bodies, Model 8018GT is suited for medical equipment, automated chemistry systems, or environmental sampling equipment. Pump features 24 V Namiki brushless DC motor with integrated sensor drive-type circuit. With max flow rate of 2,000 ml/min, vacuum to 563 mm Hg, and pressure to 1.7 bar, pump is also suited for pick-and-place systems, ink jet printers, and food packaging equipment.

Clark Solutions    Hudson, MA 01749
May 10, 2013 Constructed with helical bronze gears, nickel-plated brass body, and stainless steel shaft, UP2/Oil Gear Pumps transfer both water and engine oils. UP2/P Gear Pumps, featuring PTFE gears, are suitable for transferring fresh and salt water as well as diesel fuel. All electric pumps are self-priming and measure just 4 3/8 in. in length to fit in tight spaces.  Available in 12 or 24 Vdc, pumps have motor life of approximately 2,000 hours and max operating temperature of 140°F.

Clark Solutions    Hudson, MA 01749
May 10, 2013 Available in choice of wetted materials suitable for use with aggressive media being transferred at temperatures from 5 to 50°C, WTA-2 series are solenoid operated, feature PTFE isolation diaphragms, and Perfluor or Viton® soft seal valve seat design. Elastomeric seals resist damage from particulate matter, accommodating analytical and clinical chemistry applications. While Model WTA-2R valves have molded PPS bodies, Model WTA-2K valves are designed with molded PEEK bodies.

Emerson Process Management    Knoxville, TN 37932
May 09, 2013 To simplify daily work practices, FieldQ™ rack and pinion valve actuator and controls utilize FieldQ Foundation Fieldbus v3, with device diagnostic alarm management in flexible modular package. Diagnostic alarm tools enable users to categorize and prioritize device alarms on criticality of device and severity of problem detected. Alarm settings can be configured to alert appropriate plant personnel so they can take action without being distracted by irrelevant alarms.

Roto-Disc Co.    Cincinnati, OH 45226
May 07, 2013 Roto-Clean incorporates features of Roto-Disc valve in sanitary, quick-clean design that can be disassembled and reassembled, by hand, within minutes. With each cycle, valve wipes itself clean while slicing through sticky, gummy material buildup. All product contact surfaces are constructed of FDA-compliant materials, and there are no internal hang-up points for material to collect and spoil. Valve suits applications that require frequent cleaning of processing equipment.

Vertiflo Pump Company, Inc    Cincinnati, OH 45249
May 07, 2013 Intended for use in water, corrosive chemicals, and hazardous liquids, Series 800 is built for extended life in harsh conditions with minimal maintenance at heads to 230 ft and temperatures to 350°F. Unit has operated trouble-free for 10+ years in pit depths to 26 ft and up to 3,000 gpm. Along with carbon line shaft bearings and semi-open impeller, features include high-thrust angular contact ball bearing, 416 stainless steel shafts to 1-15/16 in. and NEMA C face motor.

Maag Pump Systems Textron Inc.    Charlotte, NC 28273
May 03, 2013 Designed for critical fluids transfer, EnviroGear® Seal-less Internal Gear Pumps come in ductile-iron, carbon steel, and stainless steel. Seal-less design with between-the-bearing support system eliminates leaks and mechanical wear. Also, magnets mounted directly to rotor eliminate adapter plate and allow for single-fluid chamber. This provides short, simple flow path and allows pump to handle fluids with viscosities up to 50,000 cSt while increasing bearing life and cleanability.

HAWE Hydraulics    Charlotte, NC 28216
May 03, 2013 Designed for open-circuits in mobile machines, V40M axial piston pump has self-priming speed of 2,900 rpm, tolerates operating pressures up to 3,625 psi, and has displacement volume of 2.75 in.³/rev. Unit's swash plate design lets user fine tune flow rate. At 8.2 in. long, it connects to PTO or directly to motor by SAE-B flange. Pump is available with load-sensing and electric proportional controllers and integrates with HAWE modular valves.

Swagelok Company    Solon, OH 44139-3492
May 02, 2013 Suitable for surface and subsea installation, instrumentation, injection, and sampling systems, IPT series medium- and high-pressure products are made standard from cold worked, 316 stainless steel; annealed 316 stainless steel and other corrosion-resistant special alloys are available to meet NACE MR0175/ISO 15156 requirements. Series comprises check valves, trunnion ball valves, relief valves, needle valves, tubing and nipples, coned and thread connections, and coning and threading kits.

NLB Corporation    Wixom, MI 48393 2824
May 02, 2013 Featuring quick-change, stainless steel cartridge for 5-minute field repair, Model MGV24-1200 allows 2 or more high-pressure water jet lances or other accessories to be operated from same 24,000 psi pump unit. Valve operates at flows up to 24 gpm, can be used with any dump-style lance, and includes cam-lock pressure adjuster that locks pressure without tools. With modular design, MGV24-1200 can accommodate additional bodies to supply more lances.

Aalborg Instruments    Orangeburg, NY 10962
May 01, 2013 Able to pump liquids of low-to-high viscosity, TPV RP Adjustable RPM with Dispensing Peristaltic Pumps can be set to dispense liquids for selected time period and stop dispensing for another time period. Seven time intervals can be set. Units include controls for priming, braking, rpm setting, and flow direction reversing; adjustable carrying handle; and 24 Vdc brushless motor. User can set units to speeds of 0–300 rpm, while flow range is 0–5,000 mLpm with ½ in. ID tubing.

Qosina Corp.    Edgewood, NY 11717 8329
Apr 30, 2013 Part #80451 orange, #80452 green, and #80453 gray Hemostasis Valves have 7.5 in. long sideport tubing that connects units to 3-way stopcock. Products also feature automatic pre-slit seal for items sized 0-0.105 in. with 0-2.7 mm dia. Included rotating male luer lock has vented female luer lock cap, while stopcock has 2 female luers, tube connection, and male luer lock cap. Pre-assembled components are non-sterile.