Thermadyne Industries, Inc.
St. Louis, MO 63017
Nov 10, 2006 Cutskill 250 Series combines all components in toolbox for protection and organization. Torch handles include VanGuard safety features such as built-in flashback arrestors and reverse flow check valves. Regulators have forged brass housing cap and fine threaded adjusting T bar for smooth operation. Cutting attachment includes stainless steel cutting oxygen lever, spiral mixer that blends all fuel gases with preheat oxygen, silver brazed tubes at torch head, and beveled seat design.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Nov 09, 2006 Suited for OEM applications in medical field, Series OMA indicates and manually controls oxygen flow from oxygen generators. Clear acrylic body enables visual inspection. Precision valve and knob adjustment can be manually turned until desired oxygen flow level is reached, while ball float rises and falls to accurately indicate fluctuations in oxygen flow. Meter offers 4 ranges between 0.1-1.5 l/min and 0-10 l/min. All have ±4% FS accuracy or better.

CONCOA
Virginia Beach, VA 23454
Oct 24, 2006 Designed for high-pressure/liquid cylinder or pipeline use, tamper-proof Gas-Saver regulator lets user remove key after appropriate flow rate is set to control process quality. Non-compensated flowmeter accurately displays gas flow rate, even when coupled regulator is adjusted to as low as 3 or 4 psi. This minimizes static pressure buildup in hose that would otherwise lead to surges, reducing weld defects and minimizing shielding gas usage.

Spence Engineering Co., Inc.
Walden, NY 12586-0230
Oct 20, 2006 Offered in cast iron or cast steel, in 3/8 to 12 in. sizes, for pressures to 600 psig and temperatures to 750°F, Type ED pilot-operated pressure regulator controls operations within ±1 psig of set pressure. Construction features include balancing to accommodate high turn down, liquid, and low differential service. Self contained, spring operated, side, or integrally mounted pressure, air, and temperature pilots are available as standard.

Danfoss Flomatic Corporation
Glens Falls, NY 12801-4421
Oct 11, 2006 Direct-acting Model PRV Series C150E regulates high upstream inlet pressure to lower constant downstream outlet pressure within range regardless of water flow. Adjustable, spring-loaded balancing valves are factory set to automatically regulate downstream pressure to 50 psi. Featuring unleaded bronze bodies in sizes ½, ¾, and 1 in., units are supplied with pressure range of 15-75 psi and/or 15-150 psi. All internal parts are corrosion resistant.

Smith Equipment
Watertown, SD 57201-5636
Oct 04, 2006 Featuring 2-stage, anti-surge design, Optimizer(TM) Flowmeter Regulator helps prevent gas flow surges that normally occur when welding operator activates MIG gun or TIG torch. High-flow capacity offers delivery range up to 70 scfh and is suited for use with either straight Argon shielding gas or Argon/CO₂ mixture. Designed with CGA 580 inlet connection and 5/8 in., 18 RH internal outlet connection, Optimizer provides max pressure inlet of 3,000 psig.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Oct 03, 2006 In one enclosure with removable electrical terminal blocks, Series DHII Digihelic® II provides 4-20 mA process output, 2 SPDT relays with adjustable dead bands, and backlit LCD that can be programmed to read in pressure, velocity, or flow. Unit comes with Modbus® Communications and can be powered with 120/220 Vac or 24 Vdc. Menu key lets user select security level, set point, alarm, engineering units, and duct size. Control provides 0.5% FS accuracy on ranges from 0.25-100 in. wc.

ControlAir Inc.
Amherst, NH 03031 2315
Sep 27, 2006 Housed in NEMA 4X enclosure, Type 900X current-to-pressure (I/P) and voltage-to-pressure (E/P) transducer is available with zero-based units ranging from 0-7.5 to 0-60 psi outputs. Output pressures of up to 100 psig can be direct/reverse acting, full/split rangable, and do not need pre-regulation. Compliant with ATEX directive 94/9/EC, unit provides accuracy of ±0.1% of span. Modular design allows for wall, pipe, panel, DIN rail, and manifold mounting.

Beswick Engineering Co., Inc.
Greenland, NH 03840
Aug 28, 2006 Weighing 23 g in aluminum and 50 g in brass and SS, Model PRD3-ANB-C-DEF 2-stage, non-relieving diaphragm pressure regulator controls output pressures from 0-20 psig and is suited for low pressure regulation such as ½ psig. Device features low-friction sensor and valve arrangement for regulation and spring arrangement for handling range of regulated output pressures. With maximum rated inlet supply pressure of 500 psig, unit is used in applications with varying input pressures.

Beswick Engineering Co., Inc.
Greenland, NH 03840
Aug 01, 2006 With max inlet supply pressure of 500 psig, 2-stage, non-relieving Model PRD3-ANB-C-DEF controls output pressure from 0-20 psig. Featuring low-friction sensor and proprietary valve arrangement, unit maintains constant output pressure despite input pressure swings. Regulator weighs approximately 23 g in aluminum, and 50 g in brass and stainless steel. Applications include instrumentation, portable fuel cells, toxic gas detection, and portable medical equipment.

Georg Fischer Piping Systems
Tustin, CA 92780
Jun 16, 2006 Piping Pressure Regulating Valves come in 3 design styles for pressure reducing, retaining, or relief. Models Type V185 and Type V186 have molded design, while Model Type V182 features valve body and internal piston/o-ring design meant to optimize flow characteristics. Valves are available in PVC, Beta PP, SYGEF® PVDF, and SYGEF Plus body materials and include threaded, IR Plus, and IR Plus/BCF Plus standard end connectors. Sizes range from ½-4 in., handling pressure from 7-150 psi.

Cramer Decker Medical, Inc.
Santa Ana,, CA 92705
Jun 15, 2006 NEUMATIX GOLD(TM) oxygen pneumatic conserving regulator provides patients with reliable levels of O₂ saturation while maximizing portable oxygen supply availability. Delivering multiple, measured pulses of oxygen throughout patient's breathing cycle gives patient required amount of oxygen, rather than delivering standardized, single blast of O₂. This multi-pulse conserving technology promotes comfortable threshold for patients, even if they inhale longer or deeper.

Smith Equipment
Watertown, SD 57201-5636
Jun 08, 2006 Smith Silverline high-purity series, available in 10,000+ possible configurations, comes with variety of CGA inlet connections, outlet valves, and outlet pressure options. In addition to 2.5 in. gauges, products have regulator bodies machined from bar stock to prevent out-gassing. Sure Seat(TM) technology, consisting of filtered seat encapsulated within single-piece cartridge, ensures positive seating, provides leak resistance, and allows only pure gas to flow through outlet.

Beswick Engineering Co., Inc.
Greenland, NH 03840
Jun 06, 2006 Fabricated entirely from stainless steel, Subminiature Pressure Regulator features inlet port with 10-32 external thread and O-ring face seal for leak-tight connections. Device can be supplied in tee, elbow, cross, and manifold mount configurations as well as variety of connection types including tube barbs, compression connections, or push-to-connect styles. Various elastomeric seals are available for fluid compatibility and thermal resistance.

Elfab Limited
Tyne & Wear NE29 8SD  United Kingdom
May 04, 2006 Universal slimline rupture disk holders for Opti-Gard(TM) and Safe-Gard rupture disks feature standard face-to-face dimensions to facilitate replacement of existing holders. Holders incorporate multi-flanged design that interfaces with both Flo-Tel(TM) magnetic burst-sensing system and excess flow valves.

ControlAir Inc.
Amherst, NH 03031 2315
Apr 12, 2006 Designed to withstand harsh environments, Type 350/360/370SS Series are available with automatic drain option, low-temperature option for arctic applications, and stainless steel filter. Construction also includes 316 stainless steel housing and fluorocarbon diaphragm. Compatible with sour gas and adaptable to off shore environments, products meet all NACE standard MR-0175 requirements for corrosive resistance. Hardware allows direct, inline, or panel mounting.

Elfab Limited
Tyne & Wear NE29 8SD  United Kingdom
Sep 01, 2005 Designed to prevent environmental contamination in severe process conditions, Double-Disc Opti-Gard comprises primary and secondary rupture discs, as well as pressure gauge or switch to monitor space between discs. In event of chemical attack causing pinholing of primary disc, back-up prevents pollution of environment, while intermediate pressure sensor warns maintenance teams. Disc is corrosion-resistant Hastelloy C267 and features ±5% tolerance.

ControlAir Inc.
Amherst, NH 03031 2315
Aug 17, 2005 Type 3500 High Pressure Regulator reduces inlet pressures from as high as 6,000 psig down to working pressures from 0–225 psig. Designed to be used in applications with various gases, self-operated unit is offered with choice of 3 output ports to facilitate hookup. Product features replaceable nylon valve seat and provides outlet pressure in 3 spring ranges: 0–125, 0–150, and 0–225 psig. Socket head or tee handle adjustment is available.

TLV Corporation
Charlotte, NC 28273
Jul 01, 2005 Direct-acting DR20SF PRV, available with 316L stainless steel wetted parts, is suited for pure and clean steam applications. Available in ½, ¾, and 1 in. NPT sizes, valve features Class 4 seat leakage rating for tight shutoff. Flow-up design, as well as flat valve and plug arrangement, lend to secondary pressure stability. Able to reach pressure reduction ratio of 30:1, product features inline access to internal parts and reusable PTFE gaskets.

SMC Corporation Of America
Indianapolis, IN 46226
Jun 14, 2005 Compact Manifold Regulators Series ARM10/11 enables mounting of multiple units in control panel or on DIN rail. Units include built-in pressure gauge with 2 pressure ranges, straight and elbow type push-in fittings, integral isolation valve, and integral pressure switch to monitor inlet pressure to manifold. Available with top or front facing control knobs, ARM10 single unit regulator has same functions as ARM 11 manifold regulator, and is suited for panel mounting.