Fluid & Gas Flow Equipment, Material Handling & Storage, Mechanical Components & Assemblies

M&H Helps SASS to Create a New Family of Products

March 31, 2015

MH Plastics, part of the RPC Group of companies, has recently produced a wide range of packaging for the SASS brand of intimate care products which has launched in Boots stores throughout the UK. Packaging such a range of sensitive products required a number of different approaches based on whether the contents were serums, cream or gels. MH worked extensively with SASS to ensure that each... Read More

Fluid & Gas Flow Equipment, Food Processing & Preparation, Packaging Equipment

Re-Closable Food Package combines safety and convenience.

July 23, 2014

Combining re-closing ability and tamper-evidence security, Bebo Swing™ features re-closable lid, attached to tub via ultrasonic welding, that can be hinged or fully removed. Pack solution, intended for spreadable products, incorporates perforation process which facilitates opening and can be designed for various shapes. Suitable for products with and without lidding film, product can be manufactured in monolayer or multilayer PP and can incorporate light barrier. Read More

Fluid & Gas Flow Equipment, Packaging Equipment, Sensors, Monitors & Transducers, Test & Measuring Instruments

Vacuum Packaging Analyzer measures volume of residual oxygen.

February 18, 2014

With i-Vacupack 6100, user can quantitatively measure volume of residual oxygen for flexible vacuum packages as well as test seal performance. Inner chamber, where test specimen is placed, is filled with water and sealed with sealing plate. Outer chamber is slowly injected with water to designated level and sealed. After both chambers are evacuated until test specimen expands, residual oxygen within specimen is obtained by fluid level analysis associated with corresponding calculations. Read More

Fluid & Gas Flow Equipment, Food Processing & Preparation, Materials & Material Processing, Packaging Equipment

Unique Oxygen Barrier Awarded a Scanstar

October 10, 2013

RPC Superfos has been awarded a prestigious Scanstar 2013 for its unique customised polypropylene oxygen barrier packaging. This innovative solution was developed especially for Bornholms, a market leader in seafood in Scandinavia. The series of four types of packaging replaces metal cans. Combined with a membrane sealing, the packs offer a two-year shelf life at ambient temperatures for... Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products

Garlock Distributor to Exhibit at OSEA 2012 in Singapore

November 26, 2012

SINGAPORE, - Sanitron Industries Pte. Ltd., the authorized Singapore distributor for Garlock, an EnPro Industries family of companies, will exhibit at the upcoming OSEA (Offshore South East Asia) 2012 show at the Marina Bay Sands, November 27-30, Singapore Pavilion, Booth # BE3-05.<4444>Billed as Asia's most important technology event for the oil and gas industry, the exhibition will showcase... Read More

Fluid & Gas Flow Equipment

Pump Packing targets oil and gas industry.

October 12, 2012

Designed specifically for well service equipment that operates at pressures up to 15,000 psi, including fracturing, cementing, and acidizing pumps, Blue DURATUFF® Packing eliminates extrusion and plunger wear, providing maximum sealability and extending service life. Low-friction, abrasion-resistant packing consists of proprietary header ring material combined with Chevron® pressure rings. Available for most pump sizes, packing features temperature range of -40 to +250°F. Read More

Fluid & Gas Flow Equipment

Dyna-Pak® Stem Packing System

September 4, 2012

Dyna-Pak® provides superior sealing performance while reducing maintenance costs. Consisting of alternate wafers of TFE and metal spacers, stem leakage is virtually eliminated while the problems associated with TFE cold flow are minimized.<4444>As the packing nut is tightened, metal spacers squeeze the TFE wafers, driving the TFE against the stem. At the stem, forces are concentrated and the... Read More

Fluid & Gas Flow Equipment, Lubricants, Green & Clean

Garlock's Valve Stem Seal Wins Flow Control Innovation Award

October 1, 2010

Palmyra, N.Y.- The readers of Flow Control magazine have selected Garlock Sealing Technologies' Style 212-ULE ultra-low-emission valve stem seal for its 2010 Innovation Award in fluid containment. Designed to showcase the fluid handling industry's ongoing commitment to manufacturing excellence, the awards also recognize technology breakthroughs in the categories of fluid control and... Read More

Fluid & Gas Flow Equipment, Lubricants

Valve Stem Packing simplifies leak detection and repair.

May 8, 2009

Style 212-ULE is comprised of 1 braid manufactured from yarn with GRAPH-LOCK® strands contained by Inconel® filament jacket, and second braid composed of graphite fiber and yarns. It withstands temperatures from -328 to +1,200°F in steam and non-oxidizing environments and up to 850°F in media containing free O2. Maximum pressure rating is 4,500 psig and pH rating is 0-14. Self-lubricating, corrosion-resistant packing is available in diameters of 1/8-5/8 in. and is fire-tested to API 589. Read More

Fluid & Gas Flow Equipment, Green & Clean

Garlock Valve Stem Packing Tested to API 622 Fugitive Emissions Standard

February 1, 2008

Garlock Sealing Technologies, a leader in fluid sealing technology for more than 100 years, has successfully tested its Style 1303-FEP valve stem packing for compliance with the newly adopted API 622 Fugitive Emissions Standard. Measured leakage confirmed the packing meets the requirements of the most stringent U.S. state air quality laws and consent decrees. Yarmouth Laboratories, an... Read More

Fluid & Gas Flow Equipment

Random Packing suits chemical applications.

June 25, 2007

Constructed of acid- and corrosion-resistant KNIGHTWARE® ceramic that withstands rugged handling, 3-in. FLEXISADDLE(TM) LPD random packing is suited for applications such as sulfuric acid towers, sulfite converters, and heat recovery system towers. Aerodynamic design and high open area limit nesting, ensuring good flow and transfer efficiency. Read More

Fluid & Gas Flow Equipment

Protective Packaging resists puncture and tearing.

November 17, 2006

Combining padding protection of cohesive foam with tear resistance of Valeron® Strength Film, packaging materials lend puncture resistance to package exteriors while minimizing interior abrasion. URBAN WRAP(TM) has white, abrasion-resistant outer surface that sticks only to itself to self-seal and protect package. RURAL WRAP(TM) offers look and feel of Kraft paper but promotes resistance to abrasion and slip. METRO WRAP(TM) has silver, reflective surface to protect against temperature extremes. Read More

Architectural and Civil Engineering Products, Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, HVAC

Cooling Tower Packing is compatible with all tower types.

June 22, 2005

Manufactured from 100% virgin polypropylene, Tri-Packs CT facilitates continuous formation of droplets throughout packed bed. Shape of ribs, struts, and drip rods give media optimal wetting characteristics and maintains uniform liquid distribution throughout tower. Free of corners and valleys, media eliminates puddling, while preventing dry spots and compression interlock. Supplied in 4 sizes, Tri-Packs CT is corrosion-proof and resistant to most chemicals. Read More

Fluid & Gas Flow Equipment, Food Processing & Preparation, Mounting & Attaching Products

Packing seals without adhesives or expansion.

September 22, 2004

Pre-Energized Vee Packing design model features geometry that guarantees tight seal. It does not require tightening of packing gland against seal or use adhesives at installation. It also does not rely on packing material swelling, which means product is suitable for use in water hydraulics and bio-degradable fluids. Available in sizes from ¼-96 in. dia in 20+ material configurations, product is solid cross section; split section is also available. Read More

Fluid & Gas Flow Equipment

Asbestos PTFE Packing seals liquid pumps.

July 15, 2004

Made of white asbestos fiber cords impregnated with PTFE dispersion, Asbestos PTFE Packing is soft in texture and suitable for sealing pumps handling liquidated chemicals. Packing impregnated with optional lubricants is recommended for use with reciprocating pumps or for sealing in places where linear velocity is up to 10 m/s. Read More

Fasteners & Hardware, Fluid & Gas Flow Equipment

Kevlar Packing suits hot water applications.

July 14, 2004

Universal Kevlar Packing is suited for pumps in all types of industries including chemicals, petrochemicals, paper, and sewage treatment. Since aramide fibers offer high stability, surface hardness of 40-60 HRC is recommended for shafts and protective sleeves to prevent contact surface wear. Read More

Fluid & Gas Flow Equipment

Packing suits shafts handling most chemicals.

July 13, 2004

PTFE Graphite Packing consists of braided PTFE yarn with graphite particles. Coefficient of friction, tear strength, and thermal conductivity achieve stability and contribute to length of service life. Self-lubricating packing will not score shaft. Read More

Fluid & Gas Flow Equipment

Pump Packing never gets hard or brittle.

October 14, 2002

Fiber GFO®, for use as compression packing, seals shafts on high-speed pumps, mixers, agitators, and other equipment with rotating or reciprocating shafts. Composite material will not score shafts. It runs cool through extended periods of continuous operation at shaft speeds to 4,300 fpm. Packing is temperature tolerant from -400 to +550 °F and is chemically inert over entire 0 to 14 pH range. Read More

  • 1