Emerson Process Management
Austin, TX 78754
Aug 01, 2008 Environmentally friendly Dosaodor-D computerized pressure injection system utilizes solenoid injector algorithm to ensure uniform odorant atomization into natural gas in transmission and distribution pipelines. Pressure injection system, with frequent small injections of odorant and wick distribution insert, is accurate over large range of pressures and flow rates. ROC800 series controller enables configuration and operation of system for measurement of data in real time.

Asahi/America
Malden, MA 02148
Jun 16, 2008 Engineered for continuous operating pressures from 150-230 psi, Air-Pro(TM) Compressed Air Piping System is offered with 150 psi rated tapping saddle available in 11 sizes from 2 x 1 to 6 x 2 in. Tapping saddle allows for installation of system with no drops; drops are installed after system has been hung by using tapping saddle welded in place with electro-fusion process. Saddle can be installed at any location, under any pressure.

CONTECH Construction Products Inc.
West Chester, OH 45069
May 23, 2008 Featuring reinforced polyethylene process that incorporates steel ribbing in pipe, DuroMaxx(TM) comes with structured outer wall profile and smooth internal surface. Suited for drainage and detention applications, steel composite pipe has no stress cracking and long-term stiffness. Available in 20 ft lengths and up to 120 in. dia, unit is compatible with joint-tight fabricated fittings and meets ASTM F2562 standard for non-pressurized drainage and culvert applications.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Mar 03, 2008 Made from smooth and calibrated aluminum, SmartPipe(TM) compressed air distribution system promotes optimal flow and will not rust or corrode. Full bore fittings minimize pressure drop, and leak-free connectors prevent compressed air loss. All diameters can be integrated into existing systems and modified to accommodate changing needs. To facilitate integration, push-to-fit connectors can be installed without threading, welding, or sweating.

Harvel Plastics, Inc.
Easton, PA 18044 0757
Feb 05, 2008 Available with plain end or belled one end construction, rigid extruded industrial CPVC pipe is resistant to corrosion and offered in 18, 20, and 24 in. diameter sizes with Schedule 40 and 80 dimensions. In addition to commercial hot and cold water distribution systems, product meets pressure and high-temperature drainage requirements for applications such as chemical processing.

Asahi/America
Malden, MA 02148
Sep 12, 2007 Engineered for continuous operating pressures from 150-230 psi, Air-Pro(TM) Compressed Air Piping System is available in sizes ½-12 in. with socket, butt, and electro-fusion fittings in variety of styles including tees, reducing tees, 90s, and 45s. Featuring tapping saddle, it is equipped with transition fittings, stub ends, and backing rings for flanging. Color-coded blue up to 4 in., and black from 6-12 in., product is chemically resistant to compressor synthetic oils and mineral oils.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Aug 17, 2007 Available in multiple sizes, SmartPipe(TM) modular compressed air distribution system is made from smooth, calibrated aluminum; promotes optimal flow; and will not rust or corrode. Full bore fittings minimize pressure drop, and leak-free connectors prevent compressed air loss. Via push-to-fit connectors, piping system can be installed without threading, welding, or sweating. It integrates into existing systems and can be modified to accommodate changing needs.

Harvel Plastics, Inc.
Easton, PA 18044 0757
May 11, 2007 Available in ½-2 in. diameters, FlowGuard Gold® copper-tube-size piping offers corrosion resistance and is in strict compliance with requirements of ASTM D2846 for materials, workmanship, dimensions, tolerances, pressure-bearing capability, and thermocycling resistance. Pipe is also produced to SDR 11 specifications and meets requirements of NSF Standards 14 and 61 for quality and health effects.

Georg Fischer Piping Systems
Tustin, CA 92780
Mar 12, 2007 Suited for 300 mm semiconductor manufacturing plants and applications in chemical and microelectronics markets, SYGEF® PVDF Exhaust Piping System enables safe conveyance of aggressive exhaust gases and fumes. It includes pipe sizes from 2-½ to 16 in., and various fittings, reducers, fixed flanges, gaskets, seals, and throttle valves. Other features include UV-resistance, operating temperature range from -4 to 284°F, and vacuum rating of 0.218 psi, 6 in. wc.

Cabot Corp.
Boston, MA 02109
Mar 08, 2007 Hybrid insulation pipe-in-pipe system is suited for operators looking to develop and extend production capacities of high-pressure, high-temperature (HPHT) and remote fields. Inner layer of Nanogel® aerogel (nano-technology enabled silica aerogel) placed in direct contact with high-temperature inner pipe and outer layer of polyurethane (PU) foam creates bond between Nanogel layer and outer pipe. Contstruction promotes mechanical and thermal performance.

Georg Fischer Piping Systems
Tustin, CA 92780
Feb 26, 2007 Constructed of non-metallic PVDF, SYGEF® PVDF Exhaust Piping System features highly inert, high-strength thermoplastic that will not corrode or rust. UV-resistant piping operates in temperatures from -4 to 284°F, with vacuum rating of 0.218 psi, and features clear translucent color for early detection of liquid build-up. System meets FM4910 standards, and has been tested per standard ULC S102.2 with flame spread value of 0 and smoke spread value of 50.

Strahman Valves, Inc.
Florham Park, NJ 07932 1505
Nov 08, 2006 Available in 1-24 in. sizes and pressure ratings to ANSI Class 600, Line Blinds benefit users by not requiring movement of adjacent piping when blind's position is changed from open to closed. Units are available in various materials of construction as well as with flanged ends, BWE, and special ends to meet customer requirements. Line Blinds are suited for process pipelines in oil, gas, petroleum, chemical, maritime, and tank farms applications.

Advanced Drainage Systems, Inc.
Hilliard, OH 43026
Oct 12, 2006 Made from 100% virgin high density polyethylene (HDPE), SaniTite® resists abrasion and corrosion resistance from acidic and alkaline soils and chemicals found in industrial waste and municipal sewer. Bell-and-spigot joint coupling system, which exceeds minimum requirement of ASTM D3212, provides continuous watertight performances, preventing water infiltration and sewer exfiltration. Available in 30-60 in. dia and 20 ft lengths, dual wall product has smooth waterway.

GE Co., GE Oil & Gas
Oshkosh, WI 54902
Oct 05, 2006 Using ATEX-certified sensors, on-site processor, satellite communications equipment and, when appropriate, solar-based autonomous power supply, ThreatScan(TM) monitors gas and liquid pipelines threatened by 3rd party damage. System immediately notifies operators of specific impact and offers monthly summaries of dates, times, and locations of all impacts. Onboard processing and signal analysis provides detection of real events, sparing operators from needlessly deploying resources.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Sep 28, 2006 Made from smooth, calibrated aluminum, SmartPipe(TM) compressed air distribution system will not rust or corrode. Full bore fittings minimize pressure drop, while leak-free connectors prevent compressed air loss. Push-to-fit connectors can be installed without threading or welding. Available in multiple sizes, SmartPipe is suited for headers and branch lines down to point of use. It can be integrated into existing systems and modified to accommodate changing needs.

Advanced Drainage Systems, Inc.
Hilliard, OH 43026
Sep 28, 2006 Designed for low head irrigation projects such as ditch enclosures and pipe replacement, Model N-12 Low Head Pipe is available in 30-60 in. diameters. Long bells and spigots on pipe joint enable watertight performance. Pipe is extruded with pressure-rated resin in liner portion to allow continuous pressure of up to 5 psi. Resistant to soils or effluents with pH ranges of 1.5-14, pipe can support H-25 live loads with minimum of 12 in. of cover.

Harvel Plastics, Inc.
Easton, PA 18044 0757
Jul 10, 2006 HydroKing(TM) CPVC pipe meets ASTM D2846 requirements and is manufactured to SDR 11 specifications. Copper-tube-size 1/2-2 in. pipe is suited for both hot and cold water plumbing systems. Meeting NSF Standards 14 and/or 61 for quality and health effects, pipe does not contribute harmful substances to transported potable water.

NewAge Industries Inc.
Southampton, PA 18966
May 11, 2006 Offered in 8 styles of fittings for pipe sizes from ¼-4 in., corrosion- and chemical-resistant Clear-40® pipe is manufactured from clear, virgin grade PVC compound and has slight blue tint. Rigid pipe, made to schedule 40 dimensions, does not need ties or clamps to be held upright or level. All ingredients are non-toxic and conform to FDA standards. Smooth interior pipe surface promotes flow, and construction is non-conductive and flame retardant.

DelStar Technologies, Inc.
Austin, TX 78745
Apr 12, 2006 Available in diameters ranging from 1/16 in. fractional tube to 6 in. diameter pipe, PEEK® Coretec(TM) thermoplastic products offer high-temperature performance options as well as chemical and abrasion resistance. In larger diameters, products are suited for high-pressure applications.

Abresist Corp.
Urbana, IN 46990-0038
Oct 21, 2005 KALFLEX Flexible Wear Protection Pipe System connects structural components that move due to vibration, thermal expansion, or intended movement. KALMETALL hard cast iron segments are used in components to withstand impact wear and sliding abrasion, while ALRESIST alumina oxide ceramic segments with Moh's hardness of 9, are used for components exposed to extreme abrasive wear. Elbows are available in sizes from .79-5.91 in. ID and up to 100.08 in. in length.