Tuthill Coupling Group
Berea, OH 44017
Sep 16, 2008 Manufactured out of nickel plated brass and crush resistant plastic, CC Series Coupling can achieve 200,000 activations without leakage. With non-marring design, flexible coupling accepts multiple plug configurations, reducing down time caused by switching air tools. It also ensures worker safety by eliminating dangerous hose whip, while protecting finished surfaces with rounded edges and polymer sleeve construction.

Molex Inc.
Lisle, IL 60532-1682
Aug 19, 2008 Available in shielded and unshielded versions, BradConnectivity(TM) Micro-Change® M12 12-Pole Connection System is offered with standard or Ultra-Lock(TM) connection. Cordsets are IP67/68-rated, Ultra-Lock versions are IP69k-rated, and all withstand harsh industrial environments. O-ring radial seal is operator-independent, eliminating chance of over-tightening or under-tightening. There is also no twisting or turning, and cable is UL/CSA-approved as well as halogen-free.

HASCO Hasenclever GmbH + Co KG
Ludenscheid D-58513  Germany
Aug 01, 2008 Compatible with HASCO cooling system, HASCO Safety Coupling Z80700 is operated by bayonet-type mount to prevent unintentional decoupling of cooling system. Capable of avoiding leakages, it can be used for clean room applications. Unit is available as straight design with connecting thread in nominal dia of 9-13 mm, and is suited for use with oil, water, and air.

Colder Products Co.
St. Paul, MN 55114
Jun 13, 2008 Available in acetal with Buna-N o-rings, 316 stainless steel valve springs, and with automatic shutoff capabilities, BreakAway(TM) Coupling enables user to break connection without depressing latching mechanism for automatic, rapid disconnection when needed. They are offered in in-line and panel mount styles with ¼ and 3/8 in. hose barb terminations. Max pressure rating is 20 psi and temperature range is 0-150°F.

Kurt Mfg. Co. Hydraulics
Lyman, NE 69352
May 01, 2008 Featuring tight crimp seal and rugged corrosion resistance, Spiral Hose and Couplings include precision machined internal ferrule that crimps and tightly locks into any type of spiral hose for secure, leak-proof fit. Finished with RoHS compliant trivalent Chromium-6 free process, units are available in 550 standard sizes and end configurations including JIC, O-ring, Pipe, Metric, and are intended for non-skive SAE 100 R12, R13, 4SH, and R15 applications.

Snap-tite, Inc. Quick Disconnect & Valves Div.
Union City, PA 16438
Apr 15, 2008 Adaptable to new or existing quick coupler system, QUIKXCHANGE Coupling survives hydraulic surge and pulsating flow of various work tools such as hammers/breakers, shears, and concrete crushers. Unit mounts on stick, connects or disconnects under static pressure, incorporates flush-face drybreak disconnection, and enables one man to change work tool hydraulic lines in 5 min or less.

FasTest, Inc.
Roseville, MN 55113-1317
Apr 14, 2008 Specifically designed for connecting to recessed ¼ in. NPTF transmitter manifold ports as well as ¼ in. side manifold ports, MIT-TM TwistMate® Connector features twist-to-connect action, providing leak-tight connection without thread sealants or wrench tightening for vacuum or pressure testing to 2,500 psi. These features eliminate wear and thread damage from repeated connections. Internal swivel allows installation while plumbed to supply line.

Parker Hannifin Corp., Tube Fittings Div.
Columbus, OH 43228 9698
Mar 20, 2008 Universal Push-to-Connect (UPTC) assembly provides leak-free connections for compact fluid power systems in industrial, mobile, and construction equipment. Once fully engaged, retaining element is positively trapped between male and UPTC nut. It cannot escape, even under vibration and pressure. Visual and tactile install indicators on nut and fitting signal full engagement and complete connection. Assembly can be disconnected by using wrench to loosen nut, exposing connector end.

Colder Products Co.
St. Paul, MN 55114
Mar 10, 2008 Intended for liquid media and gas applications, SRC Connector eliminates potential misconnections that can occur with luer fittings. It provides audible click for added assurance of secure, leak-free connection. Dual elastomeric seal is integral to body, creating smooth, gap-free flow path without areas for fluid to collect. Designed for 1/8 and 3/16 in. ID tubing, small bore connector is made from Class VI, animal-free materials and can withstand gamma, e-beam, and EtO sterilization.

Novaflex Group, The
Richmond Hill L4B 1B7  Canada
Feb 05, 2008 Insulvent(TM) is double-wall flexible insulated component designed to make insulated connections between appliance and common vent. For installation, users cut to desired length and attach quick-connect ends. No drilling or screwing is required. With flex-ready Insul-Wye(TM) adapter, Insulvent flexible venting systems can be installed with Category I gas-fired appliances. Solution universally adapts to any manufacturer's B-Vent with branch connections and is Insulvent-ready.

NIBCO, Inc.
Elkhart, IN 46516
Jan 31, 2008 Featuring 360/90° swivel properties, TOLCO® Figure 75 can be used to hang rods on pitched roof, as upper attachment for fire protection branch line restraint, or as seismic attachment for hanger rods. Made of steel with electro-galvanized finish, unit meets UL Listing for 3/8 in. rod, to support up to 4 in. pipe.

Hansen Couplings Tuthill Coupling
Berea, OH 44017
Jan 29, 2008 With max operating pressure of 5,075 psi, flat face, quick-connect couplings are primarily used for applications where there is risk of contamination of hydraulic circuits. Double shut-off valve configuration provides for dry break connection where fluid loss is eliminated and entry of air into hydraulic circuit is minimized. Available in NPT, BS, and SAE threads, RoHS-compliant couplings include automatic connection and sleeve lock.

FasTest, Inc.
Roseville, MN 55113-1317
Dec 28, 2007 Capable of sealing down to 0.015 in. OD, ME001 connector is designed for leak testing infusion set and drug delivery devices. Its 0.84 in. OD suits limited-space locations, while pneumatic actuation affords soft touch control of delicate components or automation for ergonomics and high-production testing. Along with max sealing capacity of 0.510 in., features include aluminum or stainless steel housings, FDA-approved seals and lubricant, as well as replaceable size and seal materials.

Binder-USA
Camarillo, CA 93012
Dec 17, 2007 Constructed with metal design including M12x1 thread locking termination, M12 Feed-Through Connectors are available in 4, 5, and 8 gold-plated contacts with A-coding. Diameter of mounting hole is 20 mm with anti-rotation flats. When properly mated, feed-through adapters maintain environmental protection rating of IP67 at both panel and mating area on each side of adapter.

FCI
Etters, PA 17319
Dec 10, 2007 Designed for signal transmissions in telecom or industrial applications, Sofix® Metric Cable Connector offers 72-position I/O solution with 2 mm spacing range and capability to handle harsh electrical and mechanical environments. RoHS-compliant product utilizes inner and outer ferrules fixed between 2 covers to ensure optimal shielding effectiveness, minimizing EMC emission and reception.

Qosina Corp.
Edgewood, NY 11717 8329
Oct 09, 2007 Available in choice of male/female acetal and polypropylene with either Buna-N or EPDM O-rings, Safety Side Snap non-luer connectors are designed to fit 5/32 in. ID tubing, and do not mate to standard luers. Capable of resisting axial force, connectors permit tubing to be tugged without disconnecting. Units have 5 psi pressure rating.

Parker Hannifin Corp., Instrumentation Connectors Div.
Huntsville, AL 35803-2197
Oct 02, 2007 Rated to 20,000 psi, Phastite Connectors can be used on larger metric and imperial tubing sizes of 14, 16, 18, 20, 22, and 25 mm, as well as ¾ and 1 in. Units are assembled by means of push-fit operation, providing permanent connections for high-pressure fluid systems. Offered in straight union, union elbow, tee, and union cross connector shapes, connectors are suited for high pressure hydraulics, deepwater oil and gas drilling, ROVs and subsea, and high pressure machinery.

Micromold Products, Inc.
Yonkers, NY 10701
Jul 31, 2007 Made of PTFE, FLUOR-O-FLO(TM) Cam-Lock Couplings feature internal FEP-encapsulated silicon O-rings, ensuring process purity and corrosion resistance in all process conditions. Cam locking levers are stainless steel and can be replaced if needed. Available in Schedule 80 pipe sizes from ½-4 in. with male and female NPT thread connection options, couplings can be used as stand-alone products or as part of PTFE threaded piping system.

PIRTEK USA
Rockledge, FL 32955
Jul 18, 2007 Manufactured with ¼ in. NPT female threads on each end, PIRTEK Air Coupling PAC-20 and PIRTEK Air Probe PAP-20 are rated to 300 psi. Couplings can be used by all sectors of industry, from automotive repair shops to large manufacturing facilities. More specifically, couplings are suitable for connecting air tools and air hoses to facilities compressed air system.

Kurt Mfg. Co. Hydraulics
Lyman, NE 69352
Jul 11, 2007 Finished with RoHS-compliant trivalent Chromium-6 Free process, Hose Couplings and Adaptors exceed industry SAE standard, withstanding over 400 hr of salt spray testing. Units have max working pressure of 6,000 psi and are designed for all hydraulic applications. Over 1,500 coupling types are available, including metric, R2 reusable, R5, and beadlock, as well as couplings with API threads and CAT flanges.