Flexaust Co., Inc., The
Warsaw, IN 46581
Jul 14, 2009 Available in 1.5 and 2 in. ID sizes in standard 25 and 50 ft lengths with plain finish and gray color, Flexaust Genesis® FLX Plus suits portable industrial applications such as wet/dry vacuum cleaners, car washes, and trim evacuation conduit. Crush-resistant polyethylene copolymer hose is engineered with double-profile construction that is reinforced with integral polyethylene helix. Abrasion-, chemical-, and detergent resistant unit moves smoothly over rough surfaces.

HASCO Hasenclever GmbH + Co KG
Ludenscheid D-58513  Germany
Jul 07, 2009 With Z1680/... downtime due to coupling of ejector system to molding machine for frequent mould changes is reduced. Activated pneumatically, solution locks coupling rod mechanically and without continued assistance of compressed air. Two variations are available: Z1681/... ready for assembly with threaded stem, and Z1682/... with length that can be determined by customer and provided with thread. Other features include optical location aid on rods and tensile forces up to 80 KN.

Kadant Johnson, Inc.
Three Rivers, MI 49093
Jul 06, 2009 Designed for applications with rotating pipe and 2 flow passages, SNX self-supported rotary joint features convex seal ring, rotating horizontal pipe, and 2 carbon graphite support bearings that are widely-spaced to support joint. It is available with 1 in. threaded or quick-release flange nipple connection and is rated for up to 500°F, 300 psig, and 450 rpm for steam service. Joint can also be applied to thermal oil applications up to 650°F and 150 psig.

Easyfit, Inc.
Beachwood, OH 44122
Jun 30, 2009 Available in 2 sizes each to fit 1¼ and 1½ in. nominal pipe, EFA03G Short Tee fitting is designed to join upright and horizontal rail, while EFA40G Crossover fitting provides 90° offset crossover joint within structure. They are constructed of cast iron to BS EN 1562:1997 for strength and durability and are galvanized to BS EN ISO 1461:1999 for corrosion resistance. Fitting simplify installation, requiring only hex key to tighten stainless steel set screws.

Parker/Texloc Div. of Parflex
Fort Worth, TX 76106
Jun 23, 2009 Designed to operate in temperatures as high as 500°F, chemically inert UV resistant fluoropolymer tubing protects wiring from sunlight and UV rays. Custom and standard sized tubes ranging from .004-4 in. ID are available in TexFluor® PTFE, FEP, or PFA. Tubes are offered in smooth bore, heat shrink for covering wires, or in extra flexible convoluted or corrugated style, while dual shrink tube can encapsulate wiring to create moisture barrier as well.

NewAge Industries Inc.
Southampton, PA 18966
Jun 22, 2009 Suited for moderate non-hydraulic pressure applications, Kwik Clamp(TM) nylon hose clamps feature double row of durable teeth to ensure strong bond that will not vibrate loose. Made from U.L.-listed, black, nylon 6-6, they cannot corrode or rust and are light weight, non-conductive, and may be reused. Over 30 sizes are offered and range from ¼-4¼ in. nominal OD.

Flexaust Co., Inc., The
Warsaw, IN 46581
Jun 16, 2009 Made from coated polyester fabric, Flexaust® CW-162 safety ventilation hose meets Department of Transportation standards for flame spread and smoke generation per ASTM E162, ASTM E662 along with SMP 800C, and FRA requirements. Available in sizes from 1.5-12 in. ID, unit operates over -45°F to 250°F temperature range. It is supplied with plain or cuffed ends in 25 ft or custom lengths.

Parker TexMed
Fort Worth, TX 76106
Jun 08, 2009 Acting like fabric, pores in TexPore(TM) expanded PTFE tubing permit cells to attach to tube as well as escape from tube, depending on application. Permeable tube can be used in dispensing of special drugs or dyes that need to be released into body quickly or in applications where gasses and liquids must be separated. Capable of operating at temperatures up to 500ºF, biocompatible, non-aging, non-toxic and autoclavable tubing is available in sizes ranging from 0.62-400 in. ID.

Rohrback Cosasco Systems
Santa Fe Springs, CA 90670
Jun 03, 2009 Configured to meet specific requirements, Side-Stream Assembly can measure metal loss, corrosion/erosion rates, pressure, temperature, flow, and bacterial activity in pipelines. It includes multiple 1 in. tees, each configured with choice of monitoring technologies, and provides data within minutes. Flexible and adaptable configuration does not require plant shutdown for installation, and design enables system to be moved to other test locations.

Murrelektronik, Inc.
Duluth, GA 30096
Jun 01, 2009 IP65 sealed Junior Timer Valve Plug is designed for applications in mobile hydraulic sector, and features locking mechanism to save time during installation and maintenance. Available in 3 models: without suppression, with LED, and with LED and suppression, unit has operating voltage of 24 V and capacity of 4 A.

Flexaust Co., Inc., The
Warsaw, IN 46581
May 28, 2009 Flexadux® TR-Series Thermoplastic Rubber Hose is flexible, compressible, and provides moisture, chemical, and UV resistance. Two versions are available and both are supplied with 2 in. soft cuffs and connect using standard clamps and accessories. Flexadux® TR-LT come in sizes 1½ to 16 in. I.D. with 0.020 in. wall and Flexadux® TR-XLT comes in 2 to 6 in. I.D. with 0.012 in. wall.

Valco Instrument Co., Inc.
Houston, TX 77255
May 28, 2009 Offered in natural PEEK, solid and dual layer color coded, and striped and dash-stripe coded versions, tubing uses colorants that are RoHS compliant. Dual layer tubing eliminates any possibility of contamination of critical sample stream by colorants, as only outer layer is pigmented. Available OD sizes are 360 micron, 1/32, 1/16, and 1/8 in., while standard ID sizes and colors are .005 in. Red, .007 in. Yellow, .010 in. Blue, .020 in. Orange, and .030 in. Green.

Alliance Plastics
Erie, PA 16510
May 11, 2009 Black dip molded vinyl caps, typically used to protect threaded or non-threaded tubing, rods, pipes, and fittings, are made from material flexible enough to stretch over larger dimensions without tearing, splitting, or shredding. Glossy finish lends to use as decorative end cap, and sizing starts as small as 0.078-8 in. in ½, 1, and 1½ in. lengths, with and without pull tab.

FasTest, Inc.
Roseville, MN 55113-1317
May 05, 2009 Capable of sealing outside diameters down to 0.015 in., ME001 Series is designed for leak testing of infusion set and drug delivery devices. Connectors have 0.84 in. OD to mount in limited space locations, and pneumatic actuation, which is suited for soft touch control of delicate components.

Parker/Texloc Div. of Parflex
Fort Worth, TX 76106
Apr 30, 2009 Stainless Steel Braided Convoluted Hose Assemblies are manufactured in sizes from ¼-4 in. ID depending on style and operate in temperatures up to 500ºF. SCW hose is standard wall PTFE convoluted assembly, where as SCWV is heavy wall PTFE, open pitch style for kink resistance and reduced permeation. Heavier wall convoluted tubing can handle vacuum applications at elevated temperatures.

Richco, Inc.
Morton Grove, IL 60053
Apr 29, 2009 Designed to securely close off unneeded panel holes, PGM series hole plugs are available in 34 different sizes to accommodate wide variety of hole diameters and panel thicknesses. Product is RoHS compliant.

Lockwood Products, Inc.
Lake Oswego, OR 97035
Apr 24, 2009 LOC-LINE® Adjustable Hose System is available with hose option for moderate-pressure applications. Its ¼ in. Extended Elbow, when combined with Extended Elements and Element Clamps, allows design of complete coolant hoses that will work for pressures up to 110 psi. This elbow, which curves 90° over 1.5 in., requires 2 Element Clamps to accommodate use with higher pressures. Combined with Side Flow Nozzles or T Fittings, it can create complete rigid circle around cutter.

Flexaust
Warsaw, IN 46580
Apr 24, 2009 Flexaust Sump Pump Hose Discharge Kit includes 1 ¼ or 1 ½ in. I.D. by 24 ft flexible polyethylene drain tubing, universal male thread hose insert with barbed adapter for seal, and hose clamp. Ready for installation, kit is designed to fit all sump pumps.

Kochek
Putnam, CT 06260
Apr 09, 2009 Weighing 15 lb per 100 ft section, 1 in. lightweight red booster hose is resistant to kinks and features low-profile 1 in. aluminum coupling. Hose is constructed of extruded thin-wall EPDM rubber liner and polyurethane-coated, abrasion-resistant, all-polyester cover. This durable, flexible, and compact product is suited for forestry, municipal, and industrial applications.

Brennan Industries, Inc.
Cleveland, OH 44139
Apr 08, 2009 Double-ferrule instrumentation-grade fittings feature interchangeable nut and ferrule sets, which enables installer to use one tube fitting manufacturer's nut and ferrule sets within body of another manufacturer. They also have intermixable components that work with those of several other manufacturers. Each fitting is packaged in its own pouch and thread-protector to keep fitting clean from contaminants, and all packaging has traceable codes printed on box for reference.