Binder-USA
Camarillo, CA 93012
Dec 12, 2006 Inter-mateable with Binder 425 and 723 series, 423 series suits demanding applications requiring small, circular DIN connector. It features M16 threaded coupling system designed in accordance with IEC 130-9 and is sealed to IP67. Shielding rings facilitate termination and internal strain relief can grip cable diameters from 4-8 mm. Industrial connector supports 2-24 contacts and is available in DIN and Stereo layouts.

King Innovation
O'Fallon, MO 63368
Dec 08, 2006 Enabling irrigation and landscape contractors to make secure polyethylene pipe connections, SnapTap® features ergonomic hurricane handle for quick rotation and tip that cuts polyethylene pipe for tight seal. Short thread design enables installation without dirt or pebble clogging, while short working height facilitates installation with 80 and 100 lb 1 in. pipe.

Emerson Process Management
Austin, TX 78754
Dec 08, 2006 Daniel® Senior® Model 2000(TM) Orifice Fitting is designed with greaseless isolation valve that provides bubble tight seal, to reduce personnel exposure to pipeline content. Operation up-time is increased and maintenance reduced, by use of plate release mechanism that helps remove stuck plate carrier from metering position. Standard o-rings allow for reusability, while retractable locking pin enhances safety of operation.

NewAge Industries Inc.
Southampton, PA 18966
Dec 07, 2006 Available in ¼, 3/8, and ½ in. sizes, Y style Thermobarb FDA PP barbed fitting works with soft, flexible tubing such as silicone or thermoplastic rubber and are suitable for single-use tubing assemblies. Connector features tapered lead barb for tight fit and reduced leakage, and smooth surface allows for unrestricted, uniform flow. It has operating temperature range of 10-220°F, conforms to USP Class VI standards, and is FDA 21 CFR 177.1520 and RoHS compliant.

Beswick Engineering Co., Inc.
Greenland, NH 03840
Dec 06, 2006 Miniature fittings adapt Imperial/English threaded components to metric threaded components. Products include M3 Internal to M5 External; M3 External to M5 External Nipple Fitting or M3 Internal Extension Fitting; and M3 External Universal Nipple Fitting. Also available are 10-32 External to M3 or M5 Internal; 10-32 Internal to M5 Internal or M6 External; and 10-32 or M5 Internal to M3 External Fittings. Additional types are available.

Eaton Corp.
Cleveland, OH 44114
Dec 04, 2006 Utilizing 2-edge cutting ring and soft-seal technology, WALRing System withstands operating pressures up to 11,600 psi with 4:1 burst rating. It is offered in sizes from 6-42 mm and built to ISO 8434-1/DIN 2353 standard. Assembly of WALRing connections is achieved by using WALRing System nut and Viton soft seal in combination with Walterscheid fitting bodies. System is suited for hydraulic systems on in-plant industrial equipment, as well as mobile on- and off-highway equipment.

Beswick Engineering Co., Inc.
Greenland, NH 03840
Dec 01, 2006 Featuring 10-32 thread, straight brass Model MCB-14 and 303 SS Model MCB-14-303 measure 53/64 in. long and are designed with ½ in. hexagonal body. Elbow compression fittings include brass Model MCBL-14 and 303 SS Model MCBL-14-303, which are 59/64 in. long and have installed height of 21/32 in. All provide leak-tight seal for tubing connections. Seal options include Buna-N, Fluorocarbon, EPDM, and Silicone.

Advantapure, Div. Of NewAge Industries
Southampton, PA 18966
Nov 28, 2006 Made from platinum-cured silicone with braided polyester yarn between walls, APSH Hose is available with anti-wick seals to prevent liquid absorption within hose walls. It is suitable for fluid or air transfer in temperatures from -100 to 400°F. Hose resists compression set, chemical attack, ozone, radiation, moisture, and environmental exposure, and imparts no taste or odor to critical streams. Available in 25 and 50 ft coils, hose features nominal ID from .063-1 in.

Nicholson Steam Trap
Walden, NY 12586 2000
Nov 15, 2006 CoMBo is designed for clean steam equipment condensate drainage in pharmaceutical, bioprocess, electronic, food, beverage, and cosmetic industries. Its -B ultra sensitive bellows maintain less than 6 in. of condensate backup for loads from 1-27 lb/hr for vessels up to 40,000 L. Equipped with ¾-1 ½ in. outlet, condensate measuring elbow thermostatic sanitary steam trap is available with ¾ in. horizontal or vertical inlet, with optional thermowell for resistant thermo probe (RTD).

J. W. Winco, Inc.
New Berlin, WI 53151
Nov 14, 2006 Accommodating ½ in. round or 7/16 in. square tubing, Cross Blocks for Square and Round Tubes feature stainless steel socket cap screws and hex nuts. Used for mounting perpendicular and horizontal rods, blocks are made of black glass filled nylon plastic that is resistant to oil, solvents, and corrosion, and has maximum heat resistance of 110°C. Cross blocks suit conveyors, packaging equipment, pharmaceutical, automation, and material handling industries.

NewAge Industries Inc.
Southampton, PA 18966
Nov 13, 2006 Made of clear PVC with steel wire reinforcement that allows hose to resist kinking, crushing, and collapse even at full vacuum (29.9 in./Hg), Vardex® hose is suitable for either fluid or air transfer in pressure and vacuum applications. Spiral steel supporting wire is encased within tubing and never contacts inside or outside of hose. Available in 9 sizes ranging from ¼ to 2 in. ID, hose offers rubber-like flexibility and is resistant to corrosion and abrasion.

Strahman Valves, Inc.
Florham Park, NJ 07932 1505
Nov 08, 2006 Available in 1-24 in. sizes and pressure ratings to ANSI Class 600, Line Blinds benefit users by not requiring movement of adjacent piping when blind's position is changed from open to closed. Units are available in various materials of construction as well as with flanged ends, BWE, and special ends to meet customer requirements. Line Blinds are suited for process pipelines in oil, gas, petroleum, chemical, maritime, and tank farms applications.

Binder-USA
Camarillo, CA 93012
Oct 31, 2006 Featuring M12 rear thread, Series 713 Connectors can be mounted to panels up to 3 mm thick. Units are fixed from rear of panel with hexagonal nut. Male sockets with a-coding are offered in 4-, 5-, and 8-pin versions, while b-coded version is available with 4 pins. Solder-cup contacts allow wires of any length to be terminated.

Brennan Industries, Inc.
Cleveland, OH 44139
Oct 27, 2006 Comprised of nut, back ferrule, front ferrule, and body, fittings produce torque-free seals that reduce hazardous leaks at tubing connections. Ferrules are tightly swaged around tube, and lack of initial strain on tubing ensures no tubing wall damage. Axial movement along tube prevents torque transmission from fitting to tubing. Resistant to temperature change, fittings work with variety of tube materials and withstand impulse and vibration in vacuum and pressure systems.

Flexaust Co., Inc., The
Warsaw, IN 46581
Oct 26, 2006 Offered in 25 ft lengths with IDs from 4-18 in., Flexaust® Flexadux® ADC is made of medium-weight PVC and reinforced with spring steel wire helix. Smooth inner surface minimizes friction loss and optimizes air flow characteristics. Suited for positive pressure and light vacuum applications, hose operates over 20-160°F range and resists chemicals, weathering, and moisture. Compression ratio of 9:1 allows for tight bending.

VICI Valco Instrument Co., Inc.
Houston, TX 77255
Oct 25, 2006 With 2-56 threads, 360 µm High Pressure Fittings permit direct connection of 360 micron OD fused silica, PEEK, stainless, or electroformed nickel tubing without using liners. Lead-free connection that seals at pressures in excess of 20,000 psi can be formed with available manual tool. PEEK nut is supplied with glass-filled PEEK ferrule, while stainless nut uses 316 SS ferrule. Ferrule snaps into nut, but is free to rotate and does not twist tube as nut is tightened.

Brennan Industries, Inc.
Cleveland, OH 44139
Oct 25, 2006 Machined from round stock, one-piece Brennan flange adapters are hot-piercing bent for desired angle. Available in carbon and stainless steel to withstand high pressures, adapters feature swept configurations that allow them to function in limited clearance application situations.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Oct 18, 2006 Made of polyolefin, ZEROHAL ZH2 and ZH4 carry 125°C temperature rating, pass UL/CSA VW-1 flame test, and are suitable for commercial electronic applications that require low toxicity materials. ZH2 is available in 27 metric sizes with inside diameters ranging from 0.8-30 mm and min recovered wall thicknesses from 0.33-0.89 mm. Available in 15 sizes with inside diameters from 0.6-10.0 mm, ZH4 has min recovered wall thicknesses of 0.25-0.28 mm. Shrink ratios are nominally 2:1 for both.

Norplex Micarta
Postville, IA 52162
Oct 18, 2006 Providing electrical insulation and moisture resistance, Model RT628 phenolic-paper composite tube material can be used in electrical or general-purpose applications, and is suitable for small components that require complex machining patterns. Features include tensile strength of 12,300 psi, compressive strength of 22,500 psi, and moisture absorption of 1.3%.

Advanced Drainage Systems, Inc.
Hilliard, OH 43026
Oct 12, 2006 Made from 100% virgin high density polyethylene (HDPE), SaniTite® resists abrasion and corrosion resistance from acidic and alkaline soils and chemicals found in industrial waste and municipal sewer. Bell-and-spigot joint coupling system, which exceeds minimum requirement of ASTM D3212, provides continuous watertight performances, preventing water infiltration and sewer exfiltration. Available in 30-60 in. dia and 20 ft lengths, dual wall product has smooth waterway.