Hose Clamps

Fluid & Gas Flow Equipment

Hose Clamps come in 25-piece contractor packs.

July 14, 2015

Intended for contractors and big jobs, 25-Piece Contractor Packs include Ideal-Tridon® hose clamps in SAE sizes from 4–64. All stainless steel clamps are USA-made and are UPC certified. Bags are resealable bags for future use with abundant quantity that helps minimize wasted time shopping for clamp. Read More

Material Handling & Storage, Fluid & Gas Flow Equipment

Portable Clamp Kit facilitates A/C barrier hose assembly.

April 29, 2013

Featuring 50 color-coded clamps in 5 sizes, PolarSeal® II Clamp Assortment System contains handheld tools for creating A/C barrier hose assemblies directly on vehicles. Kit also includes ratcheting pliers that do not release until assembly is crimped, preventing leaks, improper/poor quality crimps, and comebacks. ID hose cutter and hose cutter replacement blade are also standard, and clamps include positioning guide to ensure proper alignment over fitting stem. Read More

Fluid & Gas Flow Equipment

Hose Clamps feature double tooth interlocking jaw.

October 9, 2007

Molded in black Nylon 6/6, Double Grip Hose Clamps are corrosion- and chemical-resistant, and range in size from ¼-2¾ in. to accommodate most applications. Overlapping tapered ring is fastened around hose or tubing and secured to required tightness by compressing double gripping interacting graves in ratcheting fashion, creating tight sealing application. Clamps can be removed by separating clamping halves in perpendicular direction at seal. Read More

Material Handling & Storage, Fluid & Gas Flow Equipment

Worm Gear Clamps join rubber/silicone hoses and duct lines.

April 30, 2007

Manufactured with 300 series stainless steel housings and bands, Micro and Standard Series come with 5/16 and ½ in. wide bands, respectively, and can be specified with zinc plated or stainless steel worms. Micro Series comes in SAE sizes 4 and 6, while Standard Series is available in 22 sizes from SAE 6-104. Common installations include HVAC and plumbing applications, and clamps can also be installed on engine applications in various industries. Read More

Material Handling & Storage, Fluid & Gas Flow Equipment

Clamps feature EPDM extrusion cushioning.

March 2, 2006

Cushion clamps series COL and CDL are available in hot-dipped galvanized steel, chemically treated G-90, or Type 304 annealed SS. Units are designed to secure and route wire, cable, tubing, and hoses. COL series offers contoured configuration clamping diameter, offset lower leg, and can secure one tube. CDL series can secure multiple tubes. Clamps are suited for agricultural, automotive, marine, OPE, recreational vehicle, and industrial manufacturing applications. Read More

Fluid & Gas Flow Equipment

Hose Clamps can be used in place of T-Bolt clamps.

December 9, 2005

Helping to extend hose life, ABA Ultra(TM) heavy-duty hose clamps feature non-perforated band with rolled edges that moves smoothly around hose without cutting into it. Entire clamp, which consists of band, screw, and housing, is made of AISI 316 stainless steel to withstand harsh environments. Fine thread pitch optimizes clamping force generated per screw turn. Read More

Fluid & Gas Flow Equipment

Hose Clamps have 1-piece design.

April 28, 2005

Constant Tension Light Band self-compensating hose clamps are manufactured using austempering method, a heat treating process that ensures strength and eliminates brittleness. With single piece construction that provides leakproof connections, clamps are suited for applications in small engines, agricultural & utility vehicles, automotive systems, and appliances. Read More

Fluid & Gas Flow Equipment

Hose Clamps cannot be over or under tightened.

June 23, 2004

Self-Compensating Hose Clamps expand and contract with hose in response to temperature changes in application. Installed and removed using manual or pneumatic tools, clamps are suited for low-pressure applications in single-wire, double-wire, and constant tension band configurations. They also offer alternative to gluing hoses to manifolds, providing effective clamping without messy glues that could clog hose line. Read More

Material Handling & Storage, Fluid & Gas Flow Equipment

Nylon Clamps hold pool and spa hoses securely in place.

November 26, 2003

Corrosion-resistant, reusable, nylon clamps secure hose and tubing in commercial or residential pool and spa applications. Single-piece hose clamps install and tighten with hand pliers, and interlocking design allows clamp to be adjusted in place for max clamping strength and leak-free seal. Constructed from heat-stabilized high-impact type 6/6 nylon, they withstand temperatures to 125°F and accommodate clamping ranges from 6.4-60.3 mm. Read More

Fluid & Gas Flow Equipment

Clamp offers constant tension clamping during thermo cycling.

August 8, 2003

Radial(TM) clamp employs 180° inserted spring liner that works radially toward hose to provide optimal contraction and expansion capabilities. Having no protruding parts, clamp is suited for applications where hose is subjected to temperature fluctuations and strong seal is critical throughout thermo cycle. Read More

Material Handling & Storage, Fluid & Gas Flow Equipment

Squeeze Clamp is 304 stainless steel.

May 12, 2003

Stainless-steel squeeze clamp works on all types of clamp ferrules to achieve leak-proof connections. Spring-loaded design allows for one-handed assembly. Device hangs on suspended tubing for storage during maintenance or cleaning and is available in 1/2-4 in. sizes. Read More

Material Handling & Storage, Fluid & Gas Flow Equipment

Low-Profile Clamps fit in tight spaces.

March 13, 2003

Stainless steel NORMACLAMP® Cobra hose clamps have one-piece design that can be closed around hose using manual or pneumatic pliers. Available in 7, 8, and 9 mm bandwidths with various diameters, units are color coded for identification. Maintenance-free, reusable products are suited for automotive air and fuel systems, washing machines, food processing, and irrigation systems. Read More

Material Handling & Storage, Fluid & Gas Flow Equipment

Worm-Drive Clamps reduce friction with smooth band.

February 25, 2003

TORRO® hose clamps eliminate sharp edges and welds and are available with built-in spring, which improves clamping force and destruction torque while compensating for compression set. Band widths include 9 mm in aluminum-zinc and 12 mm in stainless steel. Aluminum-zinc offers corrosion resistance and withstands exposure to salt spray for 144 hours without red rust. Combination head screw can be tightened with hex or slotted tool. Read More

Fluid & Gas Flow Equipment

Hose Clamps prevent hose damage.

September 25, 2002

Gemi(TM) Worm Drive Hose Clamps, with non-perforated bands, include SX9 and SX12 models, with 9 mm and 12 mm bandwidths, respectively. Both include rolled-up band edges and 7 mm hex head screw. Clamps are built to German Industrial Standard (DIN #3017) and are suitable for automotive, truck, industrial, marine, and HVAC applications. They are available in both AISI 430 and AISI 304 stainless steel. Read More

Material Handling & Storage, Fluid & Gas Flow Equipment

Hose Clamp triples band tension.

August 20, 2002

Mechanically interlocked NORMACLAMP® GBS M, made of lightweight aluminum-zinc, has rounded edges to minimize hose abrasion. It is offered in 4 bandwidths, with diameters ranging from 1 to 6 in. in increments of 1/4 in. Diameters up to 10 in. are also available. No Chromium VI is used in manufacturing of clamp or hex bolt. Clamp is used to contain high pressure or suction in municipal applications and in heavy construction, agricultural, and irrigation equipment. Read More

Material Handling & Storage, Fluid & Gas Flow Equipment, Mounting & Attaching Products

Pre-Opened Tension Clamp is clip-less.

March 26, 2002

NORMACLAMP(R) FBSC constant-tension clamp compensates for changes in hose diameter due to fluctuations in temperature. One-piece design seals and automatically re-tightens when hose diameters increase or decrease. Integrated retaining mechanism holds clamp open during assembly. Chrome-free, corrosion-resistant coating is suitable for gluing. Clamp is available in various diameters with 12 and 15 mm bandwidths. Read More

Fluid & Gas Flow Equipment

Hose Clamps are offered in various styles.

February 13, 2002

Standard hose clamps have stainless steel band and are suited to multi-purpose applications. Stainless steel clamps are suitable for corrosive environments. Shielded clamps are designed for soft hose materials. Inner stainless steel band prevents material from protruding through slots of outer band. Fuel Injection clamps have non-perforated band and zinc-plated carbon screw and nut. Locking hose clamps can be closed by hand and have temperature range of 40 to 185 deg F. Read More

  • 1