Sloan Valve Company
Franklin Park, IL 60131
Feb 06, 2006 QuickTop(TM) QT-Series includes Model QT-1521 Manual Kitchen Faucet and Model QT-1320 Manual Lavatory Faucet. Kitchen faucets incorporate elevated, swiveling spout to accommodate large pots and pans, and lavatory faucets have elevated spout to facilitate hand washing. Units have chrome finish, are offered with or without pop-up drain or deck plate, and come ready for installation with wrenches, stainless steel hoses, and mounting hardware.

2Linc.com
Hudson, MA 01749
Jan 16, 2006 Used individually or stacked, 2L Stackable No-Clog Air Exhaust Silencers reduce noise created by air exhausted from pneumatic equipment without interfering with operations. Noise reduction levels of 12-27 db are possible, depending on model or combination of models. Made from anodized aluminum, products, available in male and male/female NPT sizes of 1/8, ¼, and 3/8 in., have straight-through design that does not cause back-pressure build-up.

CONTECH Construction Products Inc.
West Chester, OH 45069
Jan 05, 2006 Engineered to stabilize stormwater runoff, Optimizer(TM) underground detention system contains flow control devices that use pressure head to begin immediately discharging at max allowable rate from multiple orifices. Corrugated metal pipe detention solution reduces required storage volume as well as excavation and backfill requirements. Multiple sizing tanks, set up independently, accommodate equally for all storms that need to be met by designer.

NewAge Industries Inc.
Southampton, PA 18966
Dec 16, 2005 Hose Assemblies range from simplistic braided PVC hose with barb-style fitting and hose clamp to fabric-and-wire-reinforced silicone suction hose with sanitary fitting secured by crimp-applied collar. Ready-to-install products are available in plastic and rubber materials such as PVC, polyurethane, and silicone, as well as Viton® and stainless steel overbraided PTFE.

Advanced Thermal Solutions Inc.
Norwood, MA 02062
Nov 18, 2005 Compact ISD-232(TM) board directly and simultaneously assesses air flow from 0-50 m/sec and temperatures from -30 to +150°C in computer feedback control and measurement systems using independent, mobile sensors that can be placed anywhere in test domain. Measuring 3.34 x 1.44 x 0.55 inch, board may be used to control devices such as laboratory wind tunnels and HVAC regulators or to provide read-out data for display systems. LabVIEW(TM) software is available.

Enpac Corp.
Eastlake, OH 44095
Aug 15, 2005 Designed for dispensing material from 55 gal steel tight-head drums outfitted with pump, Drip Sentinel™ Drum-Top Workstation™ helps save liquids by catching and redirecting them back into drum. Made of non-corrosive and chemically resistant polyethylene, product features molded-in raised rim to reduce splashes and spills, and raised ribs that provide clean, flat area to place containers to be filled. Stainless mesh strainer screens liquids returning to drum.

AMISTCO Separation Products Inc.
Alvin, TX 77511
Jul 26, 2005 Uniflo Inlet Diffusers evenly distribute gas flow over downstream separator and remove bulk liquids and solids from gas stream. By maximizing liquid distribution, channeling problems and re-entrainment of liquid droplets in mist eliminator are avoided. Use of diffusers also prevents gas from jetting into liquid level creating further entrainment problems. Available in range of alloys, diffusers can be designed for vertical or horizontal separators.

Gentech International Ltd
Girvan Ayrshire KA26 9PS  United Kingdom
Jul 22, 2005 Pushed into 22 mm copper pipe, Models FS13 and FS14 do not require coupling and sealing components, compression fittings, or threaded connection. With sensor connected and mounted vertically in pipe, switches operate at liquid flow rate of 1 lpm and max pressure of 10 bar at 20°C. Units feature brass housing and noryl internal components, making them suited for domestic boiler heating systems, industrial circulating pumps, or liquid dispensing applications.

AW-Company
Franksville, WI 53126
Jun 21, 2005 To replace outdated mechanical flow meters in paint mix rooms, Flow Meter and Manifold System adapts to current paint recirculation and transfer systems. Unit, constructed of 316 stainless steel, features JVM-60CG flow meter, RT-Ex2 battery-powered digital display, and ¼ in. NPT adapter for pressure gage. Unit also comes with 3 full port ball valves with complete bypass system and tri-clamp connections with Teflon o-rings.

Binks ITW Industrial Finishing
Glendale Heights, IL 60139
May 20, 2005 Stainless steel 1-quart siphon feed cup and 3 pressure assist cups are designed to provide precise fluid pressure control with conventional spray guns. They incorporate air regulator, flare lip cup, and flattened bottom cup design. They also feature proprietary check valve and vent design as well as lid, yoke, and lever design. Interchangeable parts include stainless steel cups, lids, lid gaskets, fluid tube, and yokes.

Severn Trent Services
Fort Washington, PA 19034-2707
Apr 13, 2005 Jr. Hydra-Stopper makes pressure taps and line stops on water and wastewater lines, ensuring fire protection and continued service. It temporarily blocks flow of water in pipes ranging in size from ¾–2 in. Rated to 100 psi, system is suited for cast iron, asbestos cement, steel pit cast, ductile iron, plastic, and copper pipe. It can also be used to add service connections, chemical injection points, lateral lines, and tank connections ranging from ¾–2½ in.

ifm efector, Inc.
Exton, PA 19341
Apr 04, 2005 Used to continuously monitor compressed air systems, efector Metris divides plant into zones based on number of fittings and potential leakage points in any area. Sensor can be mounted in supply pipe to monitor one machine or in plant zone to monitor several machines, sensing compressed air levels when equipment is on or off. Micro DC, PNP sensor models SD6001 and SD8001 have respective measuring ranges of 0-44 and 0-132 scfm.

Elfab Limited
Tyne & Wear NE29 8SD  United Kingdom
Jan 21, 2005 Explosion vents are supplied with Panel Flo-Tel burst-detection device based on magnetically-actuated detection system that provides open signal once panel has operated. Panels are made from corrosion-resistant 316 stainless steel in sizes from 0.9–25.8 ft². Offered in various shapes, products operate over pressure range of 0.7–7 psig and in temperatures from -40 to +400ºF. Non-fragmenting design is suited for use in backpressure and vacuum conditions.

GE Energy
Atlanta, GA 30339
Dec 14, 2004 UltraScan® Duo, suited for use in oil and gas industries, utilizes phased array ultrasound technology to perform pipeline inspections in one run. Automated sensor system can be adjusted to measure multiple types of defects. Each sensor in system is controlled by on-board computer, which adjusts size, strength, and angle of signals. Pipeline inspection gauge processes and stores data on-board.

Bradley Corp.
Menomonee Falls, WI 53051
Dec 09, 2004 Aerada™ line includes faucets with heavy-duty commercial features such as solid cast brass components, anti-rotational trimplates, and flexible stainless steel supply hoses. All faucets feature 0.5 gpm, vandal-resistant aerator. Electronically activated faucets in 800, 900, 1,000 (Gooseneck), and 1,100 (Low Arc and High Arc) Series use IR activation. Mechanically activated 90-75 and 90-80 Series faucets are also available.

Interpower Corporation
Oskaloosa, IA 52577-0115
Nov 23, 2004 High Power Pin and Sleeve Connection Devices are suited for equipment rated from 16–32 A with service at 120–250 Vac. In 3-pin configuration, units offer 16/20 A or 30/32 A rating, with 4 and 6 hr ground pin position. Devices featuring 4 pins are rated 20–125 A and come with 6, 7, 9, and 12 hr ground pin position. Five-pin units are rated 20–125 A with 6 and 9 hr ground pin position. All offer IP 44-67 protection and can be cable or panel mounted.

Emerson Process Management, Rosemount Div.
Chanhassen, MN 55317
Aug 31, 2004 Requiring minimal straight pipe-run, Rosemount Conditioning Orifice Plate installs downstream of disturbances. It conditions flow profile for stable measurement, accurate to ±0.5%, using 4 equally spaced holes. Rosemount 405 Compact Conditioning Orifice Plate and 1595 Conditioning Orifice Plate enable users to extend use of orifice plates into measurement points previously limited by existing piping configurations.

Colbond Geosynthetics
Enka, NC 28728
Aug 19, 2004 Available with filter fabric on one side and featuring square waffle configuration, Enkadrain 3000R subsurface drainage composites have polypropylene core made from 99.5% recycled post industrial waste. Because they exceed 40% post-industrial recycled content, they help contribute up to 2 LEEDS program points when used in conjunction with other recycled content products.

Universal Silencer
Stoughton, WI 53589 0411
Aug 05, 2004 Nelson single- and dual-inlet silencers provide exhaust attenuation choice for diesel engine manufacturers. Low-profile products, suited for space-restricted applications, are available in corrosion-resistant aluminized steel designs as well as low skin temperature design with extra layer of packed acoustic/thermal insulation. Silencers provide multiple attenuation grades, up to 42 dB reduction, in flanged and flush-mounted designs.

Malvern Instruments Ltd
Malvern Herefordsh WR14 1XZ  United Kingdom
Jul 27, 2004 Gulfstream multistage diluter provides continuous dilution to enable real-time particle size analysis of liquid process streams containing high concentration slurries of fine particles. Using laser diffraction technology, it generates complete size data for particles that range in size from 0.1–1,000 mm. Calibration-free product, powered by diluent flow, has no moving parts and fixed dilution ratio per stage of 1:5.