Interpower Corporation
Oskaloosa, IA 52577-0115
Jun 26, 2007 IEC 60320 Filtered inlets and outlets have ratings from 6-20 A and either 120 or 250 Vac. They feature robust screw mount, nickel-plated shielded enclosure, 0.250 in. quick disconnect terminals, and general purpose filter or medical, low leakage current filter. With UL recognition and CSA/VDE approvals, RoHS-compliant devices are intended for computer, medical, general purpose, and/or custom indoor type equipment applications.

VPInstruments
Delft   Netherlands
Jun 26, 2007 Available in start kit that enables immediate measuring, VPFlowScope provides users with all-in-one device for measuring compressed air systems. Product measures mass flow, temperature, and pressure simultaneously, displaying all 3 parameters in real-time on bright blue LCD display. Device also has built-in data logger capable of storing 500,000 data points. Kit also includes measurement software, power supply, and English manual.

CleanAIR Systems, Inc.
Santa Fe, NM 87502
Jun 22, 2007 Incorporating CARB-verified PERMIT filter, PERMIT Filter/Silencer cuts exhaust emissions from prime power and emergency generators. Unit is installed on exhaust of generator, eliminating visible black smoke, diesel odor, and noise while engine is running. Manufactured using 304 stainless steel, filter/silencer is corrosion-resistant and fully insulated to minimize heat loss and provide sound attenuation.

EXAIR Corporation
Cincinnati, OH 45249-1621
Jun 15, 2007 Available in 1/8-1 in. NPT sizes, Reclassifying Mufflers help companies meet EU noise directive (86/188/EEC) and OSHA standard 29 CFR-1910.95 for safe noise levels below 90 dBA. They can be installed directly into exhaust port of cylinders, valves, and other air powered equipment to reduce work area noise and harmful oil mist. Wrap design of removable element removes oil mist contamination of worker's breathing air, keeping exposure below 4.32 ppm.

Elfab Limited
Tyne & Wear NE29 8SD  United Kingdom
May 07, 2007 Lift-Gard provides venting and rupture notification to guard against damage caused by explosions in bucket elevators transporting powder and bulk solids. Made of stainless steel, flat venting system combines integral frame and Flo-Tel(TM) detection device in one unit. If Flo-Tel(TM) detects initial explosion inside elevator shaft, it automatically switches off elevator motors to reduce risk of further explosion and stop elevator operation with open explosion vents.

Construction Solutions
Scottsdale, AZ 85260
Apr 12, 2007 Installed during new building construction or retrofitted to existing buildings, DBX1000 provides streamlined storage space behind clothes dryer to house dryer flex hose and gas connection. Dryer vent box also offers safe gas line connection while minimizing possibility of kinks in dryer hose that contribute to lint build-up. Offered in high-impact polystyrene or 22 gauge steel, receptacle can be rotated in any direction to accommodate upward/downward venting.

Parker Hannifin Corp
Greenfield, TN 38230
Mar 14, 2007 Combining closed-loop pressure control and decision logic, Microfluidic Process Controller (MPC(TM)) electronic pressure control module offers pressure ranges up to 100 psig. Unit provides up to 3 channels of pressure control (proportional and/or digital) that are continuously monitored with programmable logic, allowing entire pressure control applications to be handled with single device. It accepts 3 channels of external feedback, digital I/O, and different output monitor signal.

Flexaust Co., Inc., The
Warsaw, IN 46581
Jan 17, 2007 Flexaust® Drain Hose Assembly features 10 in. long TPR rubber squeezable cuff overmolded onto hose, liquid-tight cap with strap, and molded D ring for hanging. Cuff provides flow control for tanks requiring periodic draining, and is available with vinyl stretch hose, MG-style standard vacuum hose, and blow molded version. Offered in 1.5, 2.0, and 2.5 in. ID sizes, assembly is supplied in lengths from 2 ft up with 90°, 45°, or straight molded tank connection cuffs.

Bosch Rexroth Corp., Pneumatics Div.
Lexington, KY 40511
Jan 03, 2007 Featuring die-cast zinc body, Series NL1 Mini FRLs offer transparent polycarbonate and solid metal bowls, and choice of 1/8 or ¼ in. NPT ports. Units provide filtration choices of 5, 0.3, or 0.01 micron with carbon filters for odor and vapor removal. Filter drain options include semi-automatic, float drain - normally closed, and float drain with overnight function. Regulators come in single and manifoldable designs, and adjustable lubricators provide micro-mist lubrication.

Dwyer Instruments, Inc.
Michigan City, IN 46361 0373
Dec 15, 2006 Using calorimetric measuring principle, Series CAM detects compressed air leaks, providing quick, accurate readout. Unit is virtually maintenance-free and available with ½, 1, or 2 in. NPT process connections, allowing users to choose size and range that best suits their needs.

Orange Research, Inc.
Milford, CT 06460
Nov 13, 2006 Liquid and air/gas flow switches handle pressures from 1,500-5,000 psig in hydraulic and pneumatic applications. Offered in fixed-orifice models for low-flow applications from 0-2 to 0-40 gph (liquid)/1.5-5 scfm (gas) and variable-orifice models for high-flow applications from 0-1 to 0-30 gpm/1.5-10 to 1-100 scfm, they incorporate hermetically sealed reed switches to control processes. Switches can be installed horizontally or vertically, and are offered with optional dial.

Enmet Corp.
Ann Arbor, MI 48106
Oct 25, 2006 Used to monitor carbon monoxide and dew point, MedAir 2200 compressed air line analyzer offers 4-20 mA outputs, relays, and RS 232/RS 485. Product is UL approved to UL 60601-1, IEC 60601-1, and CSA 22.2 No. 601.1.

Neptune Chemical Pump Co., Div. Of R.A. Industries, Inc.
Lansdale, PA 19446 0247
Oct 23, 2006 Electric Stroke Controller regulates flow rate of metering pumps in response to 4-20 mA dc control signal, 0-5 or 0-10 Vdc analog control signal, or can be operated from incremental dry contact closures. Color coded pushbuttons, LEDs, and single adjustment knob facilitate configuration and calibration. Available outputs include 2-wire analog position feedback signal and 4 adjustable solid state contact closures to monitor stroke positions.

Sloan Valve Co.
Franklin Park, IL 60131
Oct 13, 2006 Available in battery-powered or hardwired models, Optima® Lino(TM) faucet offers double IR sensor-based operation and uses microprocessor-based logic. Models with Integral Spout Temperature Mixer include lever that lets users adjust water temperature. Also available, i.q.-cliq(TM) button on spout of select models is used to access user-directed modes such as temporary off and continuous run. Single-supply faucet models deliver water at pre-set temperature.

Kaeser Compressors, Inc.
Fredericksburg, VA 22404
Sep 28, 2006 Made from smooth, calibrated aluminum, SmartPipe(TM) compressed air distribution system will not rust or corrode. Full bore fittings minimize pressure drop, while leak-free connectors prevent compressed air loss. Push-to-fit connectors can be installed without threading or welding. Available in multiple sizes, SmartPipe is suited for headers and branch lines down to point of use. It can be integrated into existing systems and modified to accommodate changing needs.

Dell Marking Systems, Inc.
Ferndale, MI 48220 2657
Sep 06, 2006 To eliminate dust and debris problems, operating components and pneumatic circuitry of Marking System Controllers are encapsulated in one piece. Diagnostic time is eliminated since each component no longer needs testing and replacing. Components are permanently attached to base, including air input and output ports, regulator and low pressure gauge, and power supply connector.

CONCOA
Virginia Beach, VA 23454
Jun 28, 2006 Suited for pipeline and high-flow applications, 2-stage 632 High-Flow Performance Series delivers continuous supply of gas from left/right cylinder bank configuration and consistent pressure utilizing pressure-differential technology. It is available in 15, 50, or 120 psig delivery models and enables users to select from liquid or high-pressure cylinders as mode of supply. Priority arrow provides cylinder use identification and control from single-valve body design.

Emerson Process Management, Rosemount Div.
Chanhassen, MN 55317
Jun 20, 2006 With universal plate style for installation between orifice fittings, Rosemount 1595 Conditioning Orifice Plate suits applications to ANSI 2500/DIN PN100 and process applications requiring hastelloy, monel and 304L SS compatibility. Rosemount 405C Compact Conditioning Plate offers centering option for ANSI, DIN and JIS standards that facilitates alignment between pipe flanges. Design features 4 equally spaced holes that condition flow profile for stable, accurate measurement.

E.A.R.S. North America
Lindenhurst, IL 60046
Jun 09, 2006 Exhausted Air Recycling System (E.A.R.S.) provides closed loop between air compressor and air tool by capturing exhausted air from air tool and returning it to compressor. In addition to reducing energy consumption and noise levels, tool system keeps moisture, dust, oil, and other pollutants out of compressor and air tools. This both extends life of power tools and contributes to cleaner work environment.

Bosch Rexroth Corp., Pneumatics Div.
Lexington, KY 40511
May 17, 2006 Featuring modular construction, Series AS3 FRL is comprised of filters, regulators, lubricators, and accessory devices such as shut-off valves and distribution blocks. Air Service system measures 63 mm wide and is offered with 3/8 and ½ in. NPT or G3/8 and G1/2 ports with pressure range of 232 psi. It can be used at temperatures from 14-122°F and is available with 5, 0.3, or 0.01 micron filtration. Window provides clear view of filter and lubricator levels.