Other

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, HVAC

Synthetic Dust Collector Filter offers moisture resistance.

April 8, 2015

Suitable for harsh, humid environments, HemiPleat® Synthetic is washable and can handle heavy dust loading conditions and/or hygroscopic or sticky dusts. Filter uses lightweight, 100% spun bond polyester media in pleated design that maximizes surface area while maintaining open pleat spacing for optimized dust release during pulse cleaning. Suited for applications up to 160°F, HemiPleat Synthetic comes in standard and nano fiber media versions with MERV 11 and MERV 15 ratings, respectively. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

"The Shop of Tomorrow" at NACE Expo 2014 to Include the Mobile Work Station®

July 29, 2014

The NACE Expo being held July 31st and August 1st at the Cobo Center in Detroit will include "The Shop of Tomorrow". The NACE | CARS is the largest North American conference and exhibition dedicated to the collision and service repairs industries. "The Shop of Tomorrow" will be a demonstration area showing some of the latest technology for today's collision repair businesses, and will include... Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Die Cut Membranes suit venting and filtration applications.

April 9, 2014

Supplied on rolls or sheets, with or without adhesive backing, Custom Die Cut Membranes are available in wide range of materials including cellulose acetate, nitrocellulose, nylon, PES, PTFE, PVDF, MCE, CA, GF, and PP. Products can be fabricated in variety of formats with pore sizes from 0.2–0.45 microns, depending upon material. Available in diameters from 0.25–60 in., with tolerances of ±0.005 in., membranes can be produced using digital die-less cutting, or high-speed and rotary die cutting. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Filter End Cap Supports - for Improved Operator Safety and Filter Maintenance

March 20, 2013

The new Filter End Cap Support has been launched by Russell Finex to assist operators in the safe assembling and dis-assembling of liquid filters during cleaning and maintenance. The Filter End Cap Support can be installed on a new or existing on-line Russell Eco Filter® and is available for both jacketed and non-jacketed units. The support holds the weight of the end cap and discharge... Read More

Fluid & Gas Flow Equipment, HVAC

Dust Filters are made to withstand harsh environments.

March 13, 2013

Suited for dust streams containing moist fumes, heat, chemicals, and abrasive particulate, Astech spunbond polyester cartridges are engineered for durability in tough manufacturing environments. These washable and reusable filters, temperature rated up to 200°F, are 100% non-woven polyester and offer efficiencies up to 99.9%. Intended for manufacturing filtration applications, products are resistant to abrasion and chemicals. Read More

Communication Systems & Equipment, Electronic Components & Devices, Fluid & Gas Flow Equipment, Optics & Photonics

Long Pass-Edge Filters offer 10 additional wavelengths.

December 13, 2012

Intended for fluorescence imaging and metrology applications, EdgeBasic™ Long Pass-Edge Filters combine steep edge locations from 325–1319 nm, extended blocking at and below laser line, and consistent and extended high transmission pass bands. Featuring hard coated, no burn-out durability, filters are suitable for application-specific Raman spectroscopy when optimized laser-line blocking is required and Raman shift measurement is not too small. Read More

Chemical Processing & Waste Management, Communication Systems & Equipment, Fluid & Gas Flow Equipment, Optics & Photonics, Vision Systems

KiloLambda Develops Two Unique All Passive Optical Filters Enabling Continuous Surveillance and Camera Operation

December 3, 2012

Wideband Laser Protection Filter (WPF) Prevents Eye Injuries and Damage to Sensors; Dynamic Sunlight Filter (DSF) Improves Camera Imaging in Sunlit Surroundings KiloLambda's WPF is a unique solution, which provides a single filter against any laser wavelength<4444>KiloLambda Technologies Ltd., an industry leader in passive optical power control, develops two unique optical filters enabling... Read More

Electronic Components & Devices, Fluid & Gas Flow Equipment

Raman Longpass Edge Filters detect weak signals, small shifts.

September 28, 2012

Suited for Raman spectroscopy or Life Sciences instrumentation, TECHSPEC® Raman Longpass Edge Filters create sharp transition between transmitted Raman signals and blocked laser wavelengths. Single-filter solution, used for reducing spectral noise in Stokes shift applications, have hard coated design. Providing deep blocking for maximum laser rejection, filters come in 325, 355, 473, 488, 514.5, 532, 632.8, 785, 980, and 1,064 nm cutoff-wavelengths in both 12.5 and 25 mm dia. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Miller-Leaman's Turbo-Disc Filter a Hit with Customers and the Environment.

September 18, 2012

Daytona Beach, Fla. - Miller-Leaman, Inc., a leader in the field of innovative filtration, has had great success with its Turbo-Disc Filter, a product that sets new standards for cooling towers and chilled water filtration.<4444>But don't just take it from them; listen to their customers.<4444>Kevin Becker works at QuadGraphics, a printing company with locations all across the U.S.<4444>"Their... Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Membranes and Filter Media are die-cut to user specifications.

January 30, 2012

Designed for separating air, liquids, and particulates, Custom Die-Cut Membranes and Filter Media are manufactured using digital die-less cutting or high-speed die cutting, slitting, multilayer laminating, and special packaging. Products are supplied on rolls or sheets, with or without adhesive backing. Materials include Mupor® PTFE microporous plastic, Typar®, Reemay®, woven/nonwoven filter media, polyethersulfone, hydrophobic and hydrophilic membranes, and cellulose. Read More

Fluid & Gas Flow Equipment

Acrylic Crossflow Cell enables visual monitoring.

September 19, 2011

Featuring transparent acrylic design, Model CF042AC allows users to visually monitor filtration process to optimize research and development discovery and permit exploration of new applications. Standard uses include membrane development testing, flat sheet membrane quality assurance, and RO to MF separation and purification. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Enhanced PTFE Membrane Filter Performance Comes at a Price

April 22, 2011

PTFE membrane is a microporous 'skin' applied to various filter medias to provide extremely high filtration efficiencies even when filtering sub-micron particulate. Its non-stick surface offers the added benefit of excellent dust release on the cleaning cycle under moist operating conditions, or with 'sticky' dusts.<4444>Cartridge filters utilizing PTFE membrane media are widely used in the... Read More

Fluid & Gas Flow Equipment, Materials & Material Processing, Green & Clean

Catalytic Activated Carbon uses coconut shell-based carbon.

February 11, 2011

AquaCarb 1240CAT uses coconut shell-based carbon processed to offer enhanced performance capabilities in water treatment. Properties of coconut shell base include elevated adsorption with micropore structure for VOCs, minimized ash content, and optimized hardness/abrasion resistance, which all contribute to longer effective carbon life. Product can help improve results in water quality targets for chloramine, hydrogen sulfide (H2S), and hydrogen peroxide (H2O2) removal. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Green & Clean

GE's Air Pollution Control Media Extends a Cement Plant's Bag Life from 1.5 to 4 Years, Reduces a Steel Plant's Manufacturing Particulate Emissions by 95 Percent

December 8, 2010

GE's Air Pollution Control ePTFE Membrane Renamed Preveil(TM) Following ecomagination Approval<4444>KANSAS CITY, MO. - GE (NYSE: GE) announced today that Preveil(TM) is the new name for its 99.9 percent efficiency air pollution control media. The membrane laminate can help customers in certain industries lower utility costs, extend bag life and reduce particulate emissions. For example, a cement... Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Membrane and Tubing feature optimized surface structure.

March 30, 2010

Hyper-Sintered(TM) HSTTM ePTFE Membrane and ePTFE Tubing offer uniformly distributed, high-density interconnected layer on membrane surface. Structure includes spaces to provide bonding sites for lamination to polymer non-wovens or film. Product has high tensile strength and pressure range as well as low coefficient of friction and thin, seamless wall. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Membrane Filters are custom die-cut.

December 12, 2008

Custom Die Cut Membranes are suited for filtering fluids and gases or venting in medical, pharmaceutical, life sciences, and laboratory equipment. They are manufactured from PTFE, nonwovens, and other materials, and can incorporate intricate shapes, including narrow cross sections and close hole spacing. Membranes are supplied on rolls, with or without adhesive backing, and can be produced from a dxf, pdf, or most any drawing file and material supplied or specified by customer. Read More

Fluid & Gas Flow Equipment, HVAC

Non-Conductive Filter Frames offer quick-mount assembly.

September 16, 2008

Expanding one-piece assembly unit - filter, mounting bracket, fan guard, and air flow plenum - eliminates need to specify multiple parts to serve same function. Air filter media can be installed without complex kits and procedures, and design can be made to match existing hole pattern or provide captive fasteners and adhesive tapes. While metal finishes provide corrosion protection, filters with Quadrafoam media provide protection against flammability, UV light, and fungus. Read More

Fluid & Gas Flow Equipment

Portable Filter Cart protects fluid systems against failure.

June 26, 2008

Accommodating high-viscosity lubrication and hydraulic oils, PFC Pneumatic Filter Cart can be used for filtering new fluids during transfer and replenishment or fluids currently in service. Positive displacement pneumatic pump transfers fluids by movement of diaphragms, driven by compressed air, while pulsation dampener acts as air cushion and automatically adjusts to pressure change. Dual-stage filtration removes particulate and water contamination. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Horizontal Disc Filter System has 30,000 gph max flow rate.

May 29, 2008

Along with corrosion-resistant construction and heavy-duty, 1,750 rpm FRP pumps, JUMBO Series utilizes 33 in., low-profile horizontal discs for optimal filtration capacity and minimal media changeouts. Single-chamber flow rates are available to 30,000 gph, and systems are suited for platers requiring high volume and high flow rates due to larger tank sizes and number of turnovers per hour. Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Baghouse Controller operates standalone or networked.

March 12, 2008

B-PAC(TM) MICS Series of Baghouse Diagnostic Controllers integrate IntelliPULSE(TM) Technology intelligent filter cleaning, pressure control, particulate monitoring, auxiliary sensing, and range of control functions into single system that can operate as standalone controller or networked with existing PLCs and DCS systems. Variety of configuration options are provided through company's MICS(TM) platform. Controllers meet EPA MACT, Title V, and other compliance regulations. Read More