Flow Couplings

Related Categories
Electrical Equipment & Systems, Fluid & Gas Flow Equipment, Mounting & Attaching Products

HPHT Wet-Mate Connector operates in extreme subsea environments.

March 22, 2016

Designed for operation in such environments as those found in subsea and downhole oil and gas applications, Elite Series Wet-Mate 3-channel, high-pressure, high-temperature (HPHT) connector is functionally tested to 1,034 bar and up to 150°C. This 15.8 mm dia connector, used to communicate electrical signals, features concentric contacts that are individually sealed within pressure-balanced, oil-filled plug and receptacle connector housings. Read More

Cleaning Products & Equipment, Fluid & Gas Flow Equipment

Hose and Couplings suit pressure wash applications.

March 14, 2016

Operating from -40 to +300°, Hose and Couplings are suited for pressure washing, car wash systems, and carpet cleaning systems. Hose is made from water-resistant synthetic rubber, reinforced with 1 or 2 high tensile steel wire braids. Tubing is covered with black or non-marking blue coating that is abrasion, ozone, and weather-resistant. K2 Couplings, offered in sizes 4–10, feature Bite-Wire shell for optimal hose fit. For end sprayer and handle attachments, Karcher Female Swivel is available. Read More

Fluid & Gas Flow Equipment

Metal Joint Sets accommodate 42 mm dia pipe application needs.

February 17, 2016

Nickel plated for anti-static applications or e-coated black for standard applications, LJ (42/42 mm) and the LEJ (42/28 mm) series provide complete joint assemblies for connecting 42 mm pipe commonly used to assemble such Creform heavy-duty structures as workstations, flow racks, and carts. When choosing appropriate joint, consideration must be given to configuration, flexibility, strength, and environment. Many joints are suited for industrial and logistic applications. Read More

Fluid & Gas Flow Equipment

Polypropylene Plastic Couplings integrate into OEM equipment.

January 25, 2016

With panel mount options, PMC12 Series enables OEMs to integrate flexible tubing connections directly into devices or equipment. Couplings and panel mount inserts are available in polypropylene for optimized chemical resistance and are gamma sterilizable. Variety of terminations including hose barb and ferruleless polytube fittings are offered. Featuring compact form factor, quick disconnect couplings with panel mounts are used for applications within In Vitro Diagnostics systems. Read More

Fluid & Gas Flow Equipment

Spiral Wound Gasket Pipe Unions resist temperatures up to 1,850°F.

January 25, 2016

Able to be supplied to meet such standards as MSS-SP-83 and ASME B16.20, spiral wound gasket unions provide Class 3000 Service. Seal is formed with replaceable spiral wound gaskets without need of ground joint, and flat face design provides turbulence-free fit across seats. Graphite spiral wound gasket union withstands up to 850°F for hydrocarbon, superheated steam service, and more, while silicate spiral wound gasket union resists up to 1,850°F for superheated and chemical service. Read More

Fluid & Gas Flow Equipment

Pipeline Connectors eliminate need for process shutdown.

November 18, 2015

With single or double isolation, PC3000 and PC4000 Pipeline Connectors allow steam traps to be installed without need for process shutdown. Units feature ASME 600 rated forged body suitable for use on lines up to 800°F. Fully shrouded piston valve stem minimizes potential of corrosion, while strainer protects steam trap from debris entrained in condensate. Connectors are suitable for manifold applications where steam traps are used on tracing and main line drainage. Read More

Fluid & Gas Flow Equipment

Pipe Unions exhibit high temperature resistance.

November 10, 2015

Available in 316 Stainless Steel, Monel, Hastalloy, Inconel, and more, HART Industrial spiral wound gasket unions provide Class 3000 Service in extreme temperature and environmental conditions. Flat face design provide turbulence-free fit across seats. While standard graphite spiral wound gasket union is resistant to 850°F and suited for hydrocarbon and superheated steam service, optional silicate spiral wound gasket union is resistant to 1,850°F for superheated and chemical service. Read More

Fluid & Gas Flow Equipment, Mechanical Components & Assemblies, Mechanical Power Transmission

Brass Shaft Collars and Couplings resist corrosion and galling.

November 5, 2015

Machined from C360 brass or optional C464 Naval brass, Stafford Brass Shaft Collars come in 1- and 2-piece styles with stainless steel fasteners as well as set-screw and hinged styles. These products, offering alternative to 304 and 316 stainless steel products, are designed for secure hold and come in 6 standard sizes from ½–1 ½ in. ID for commercial, industrial, and military applications. Modifications – keyways, square and hex bores, grooves, and other treatments – are available. Read More

Fluid & Gas Flow Equipment, Health, Medical and Dental Supplies & Equipment, Mounting & Attaching Products

Male Luer Lock Connector features 0.262 in. OD port.

October 7, 2015

Featuring clear polycarbonate body and tip that allow for transparent view of fluid, Breakable Male Luer Lock Connector is E-Beam, EtO, and Gamma sterilization compatible. Unit isolates media in bag port until needed, eliminating use of spikes or needles. When snapped, break-off tip floats to top of bag, identifying separation and permitting flow. Read More

Fluid & Gas Flow Equipment, Mechanical Power Transmission

Quick Disconnect Couplings are specified for dual fluid lines.

October 5, 2015

Designed for use with dual fluid lines, DPC Series offers intuitive, simultaneous connections and disconnections with one thumb latch. These ¼ in. flow couplings, offered in acetal thermoplastic, are available in valved and non-valved hose barb configurations and keyed to ensure correct directional flow. Other features of this quick disconnect coupling series include integral terminations and valve and latching mechanism.<br /> Read More

Electrical Equipment & Systems, Electronic Components & Devices, Fluid & Gas Flow Equipment

Extreme Conditions Handled by New Coaxial Assemblies on Display at European Microwave Week

September 14, 2015

Microwave Week Ipswich, MA – San-tron, Inc, a manufacturer of RF coaxial connectors and cable assemblies, will be reviewing several new innovative connectors and assemblies at the European Microwave Week in Paris, France, September 6 – 11. With a growing line of advanced, outdoor, low-PIM cable assemblies and new innovative pressurized solutions several environmental challenges related to... Read More

Fluid & Gas Flow Equipment

Water Heater Connectors eliminate soldering and glue.

September 11, 2015

Featuring patented design that helps minimize kinking or crimping, Speedi Plumb® PLUS Polymer Braid Connector resists corrosion from most household cleaning products. ProCoat® Coated Stainless Steel Connector, providing ¾ in. full flow internal diameter, resists most harsh chemicals that can cause pinhole leaks. Both push connect units have pre-inserted tube stiffener that aligns with connector tubing to produce watertight seal, and are compatible with copper, PEX, and CPVC connections. Read More

Fluid & Gas Flow Equipment

Pipe Connections withstand oil and gas industry conditions.

July 29, 2015

To ensure safe, effective exploration and transmission of oil and gas in challenging conditions, USS-LIBERTY TC&trade; premium and semi-premium connections utilize optimized threads and seals to connect individual joints of steel pipe to form continuous casing string. Premium connections, ranging from 4 ½&ndash;7 5/8 in. OD, incorporate TightFit&trade; thread form with metal-to-metal seal and shoulder configuration. Applications include shale, horizontal, and extended reach wells as well as sour service. Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products

Luer Lock to Barb Connectors feature single-use design.

June 22, 2015

Offered in natural polypropylene or clear polycarbonate, Winged Female Luer Lock to Barb Connectors mate to any standard male luer. Barbs are available in 3/32 in. OD and 1/8 in. OD sizes. EtO and Gamma sterilization compatible, single-use connectors feature ergonomic wing design that provides optimized grip, facilitating connection and disconnection. Read More

Fluid & Gas Flow Equipment, Mechanical Power Transmission, Mounting & Attaching Products, Transportation Industry Products

Gates Corporation Announces Release of 284 New Automotive Aftermarket Parts

May 27, 2015

Gates expands its aftermarket coverage with SKU additions across product lines, adding 284 parts for maximum coverage on late model vehicles. DENVER — Gates Corporation, a global diversified manufacturer of industrial, automotive, and heavy-duty aftermarket products, today announces it has expanded its extensive Original Equipment (OE) quality automotive products line with 284 new part... Read More

Fluid & Gas Flow Equipment

Swivel Connectors fit 2-6 in. diameter flexible hose.

April 30, 2015

Made from high-strength polyurethane, Flex-Tube® Swivel Connectors are designed to connect multiple lengths of hose and create single kink-resistant hose that is over 50 ft long. Units feature smooth, tapered interior to assure optimal material and air flow. When used with Flex-Tube® coextruded polyurethane hose which has ABS helix wear strip, connectors minimize twisting and flex fatigue. Connectors are available in 2, 2 ½, 3, 4, and 6 in. diameters. Read More

Fluid & Gas Flow Equipment, Material Handling & Storage, Mechanical Power Transmission

Elastic Claw Couplings extend service life of drive systems.

April 29, 2015

Available in 10 sizes made of nodular cast iron, Flender N-Bipex Couplings feature optimized cam and elastomer geometry. Elastomers are available in 3 different shore hardnesses, and allow couplings to be used across temperature range of -50 to +100°C without compromising nominal torque. Adjacent cam ring made of high-grade polyurethane has facility for sufficient load dependent deformation, while remaining in designated position under all conditions, resulting in minimized wear. Read More

Electronic Components & Devices, Fluid & Gas Flow Equipment, Health, Medical and Dental Supplies & Equipment, Mounting & Attaching Products

CPC Increases Pressure Rating on Genderless Sterile Connectors for Single-Use Bioprocessing

April 23, 2015

St. Paul, Minn. — CPC (Colder Products Company), the leader single-use connection technology, announces the increased pressure rating of its genderless AseptiQuik® G Connectors. The connectors are rated to 60 psi for 30 days and for 75 psi for 48 hours. CPC experts will be available at INTERPHEX 2015 (Booth #3171) to discuss with event attendees how they can easily incorporate genderless... Read More

Fluid & Gas Flow Equipment, Health, Medical and Dental Supplies & Equipment, Mounting & Attaching Products

Single-Use Sterile Manifold Adapters create closed systems.

April 22, 2015

Offered in gamma and high-temperature versions, AseptiQuik® Tee and Cross Manifold Adapters provide flexibility for biopharmaceutical manufacturers by enabling onsite connection of standard sub-assemblies to create wide array of customized single-use systems. Units mate with genderless AseptiQuik G series connectors without need for clamps or fixtures. Adapters are suited for transferring valuable media in single-use bag and tubing assemblies, cell banking systems, bioreactors, and mixers. Read More

Fluid & Gas Flow Equipment, Material Handling & Storage, Mounting & Attaching Products

Latchless Couplings suit liquid cooling applications.

March 18, 2015

With rugged metal housing, redundant sealing, and latchless design, RPLQ4 Series is intended for rack mounted liquid cooling applications. Non-spill shutoff valves allow hot swappable connections without drips, protecting valuable electronics. Offered with ¼ and 3/8 in. terminations in SAE and NPT configurations, color-coded quick-disconnect couplings are constructed from chrome-plated brass, polysulfone, and stainless steel materials that ensure chemical compatibility. Read More