Thuro Metal Products, Inc.    Brentwood, NY 11717
May 21, 2008 Precision machined and ground in any shape to any length, Complex Machined Shaft Components include threaded, bored, spindled, tapered, and eccentric shafts. Capabilities are: CNC turning machines up to 2½ in. bar diameter, Swiss and CNC Swiss automatics to 1¼ in. bar diameter, single spindle automatics to 2 3/8 in. bar diameter, and multi-spindle automatics to 3¼ in. bar diameter.

EGS ELECTRICAL GROUP ? APPLETON    Rosemont, IL 60018
May 08, 2008 Flexel(TM) EMT Flexible Fittings come in 1¼ to 4 in. sizes with stub fittings on both ends to allow for use with set-screw and compression fittings. They bend to one or more angles with just elbow grease, knee, or hammer, to full 90° bend or any position in between, and they can also be re-bent. Internal diameter is maintained per NEC specification, and fittings are suitable for indoors and dry locations and are UL Listed and CSA Certified.

Thuro Metal Products, Inc.    Brentwood, NY 11717
Apr 25, 2008 Fittings and connectors, including Dynatube, Parker, and Statoflex Tube Fittings, are used in aerospace and aircraft applications. They can be made to engineering specs or from blueprint drawings, with tolerance held to ±.0001 in. and surface finishes down to 5 RMS. Specialties include machining Titanium and 17-4PH, and secondary capabilities include safety wire hole drilling. All products meet world class quality standards, ISO 9001:2000 Certified.

Kadant Johnson, Inc.    Three Rivers, MI 49093
Apr 21, 2008 Constructed with SS and bronze components, Over-The-Shaft (OTS) Rotary Union is custom-designed for machinery that requires cooling on drive side of driven rolls and for rolls that cannot accept axially-mounted rotary union. Mechanical seal version handles high speed applications up to 750 rpm, while soft seal version with Quad-Seal o-ring and thrust washer suits slower speed applications. Rated up to 220°F and 150 psi, OTS can be applied to hydraulic oil/air applications.

Hollaender Mfg. Co., The    Cincinnati, OH 45215
Apr 10, 2008 Made of high tensile strength aluminum/magnesium alloy 535, 2-piece Model 104S-6 Side Outlet Cross Modular Fitting can be used in any structural application using 1 in. IPS components. Electrolytic corrosion free alloy can be used with other metal, including carbon or stainless steel. It can attach to and detach from existing structures, and are intended for modifying or upgrading existing structures without major disassembly.

Alemite LLC    Fort Mill, SC 29715
Apr 09, 2008 Designed to meet stringent military requirements, Aerospace Hydraulic Lubrication Fittings are available in carbon steel, stainless steel, and Monel with straight, 30°, 45°, 65°, and 90° configurations. Units meet Society of Automotive Engineers standard AS35411, which requires detailed performance tests, extensive documentation, and traceability of materials.

Diba Industries    Danbury, CT 06810
Mar 31, 2008 Click-N-Seal(TM) connection fittings are designed for Omnifit Gripper, Type S, and inverted cone ferrules. Reusable, preassembled fittings provide objective feedback to prevent excess torque; when correct torque is reached, they produce click and physically prevent tightening beyond that point. Connections are available with ¼-28 in. and M6 thread size fittings in 3 colors and can be specified with OD or ID of up to 1/8 in.

Parker Hannifin Corp., Tube Fittings Div.    Columbus, OH 43228
Mar 20, 2008 Universal Push-to-Connect (UPTC) assembly provides leak-free connections for compact fluid power systems in industrial, mobile, and construction equipment. Once fully engaged, retaining element is positively trapped between male and UPTC nut. It cannot escape, even under vibration and pressure. Visual and tactile install indicators on nut and fitting signal full engagement and complete connection. Assembly can be disconnected by using wrench to loosen nut, exposing connector end.

Bridgeport Fittings, Inc.    Stratford, CT 06497
Mar 13, 2008 Available in variety of sizes, Red Steel Fire Alarm Boxes and Fittings withstand harsh environmental conditions. Boxes are designed for use with Red(TM) connectors and couplings. Set screw connector joins red EMT to box, while set screw coupling joins 2 lengths of red EMT. Both concrete-tight fittings are furnished with Tri-Drive slot/Phillips/Robertson head screws and can be used for emergency circuits and security system applications, as well as fire alarm systems.

Festo Corp.    Hauppauge, NY 11788
Jan 14, 2008 NPFB metal pipe fittings are nickel-plated brass pipe fittings designed for connecting other fittings and pipes in pneumatic systems or assemblies. They offer pressure range rating of up to 580 psi and are able to withstand temperatures up to 302°F. RoHS-compliant fittings are available in 124 variants featuring parallel metric and G threads as well as tapered R threads.

Georg Fischer Piping Systems    Tustin, CA 92780
Nov 27, 2007 DoubleSafe(TM) fittings prevent cracking under high torque when transitioning between metal piping systems and Schedule 80 plastic piping systems. To address plastic pipe splitting caused by over-tightening metal threads into plastic fittings, products incorporate female-threaded metal insert molded inside spigot-end plastic body. This allows installer to connect metal system to metal side and plastic to plastic side. Double o-ring design ensures tight seal for leak-free operation.

Easyfit, Inc.    Beachwood, OH 44122
Oct 11, 2007 Equipped with back plate, base mount EF18G-40 Fittings help minimize number of components needed to attach toe boards to bases of railings, mezzanines, balustrades, bleachers, and other tubular pipe structures. Units are designed for 1½ in. standard pipe and install without welding or drilling. Weighing 4.81 lb, fittings are constructed of steel and treated for corrosion resistance.

Wagner Companies, The    Bulter, WI 53007
Oct 10, 2007 Installed by hand, Ultra-Tec® Push Lock(TM) and Pull Lock(TM) Fittings do not require special swaging equipment to attach cable tensioners and stop-ends to cable at job site. Units are made of Type 316 stainless steel and can be used with wood or metal framed railings, inside or outside, on levels runs or stairs. Once installed, there are no acorn nuts or rough cable ends and, in many cases, hardware is largely concealed inside railing posts.

Carsonite International    Early Branch, SC 29916
Sep 06, 2007 Equipped with molded vent that will not rust or break, VaporGuard(TM) protects gas utility pipelines from hazardous build up of moisture and gas. It requires no maintenance and is resistant to UV radiation. For installation, product is designed to fit any 3.5 in. ID or 3.0 in. OD pipe.

Eaton Corporation / Cutler-Hammer Automation    Milwaukee, WI 53216
Sep 04, 2007 Composite Quick-Connect (Q-CAB) Air Brakes(TM) feature brass tube that provides support for full airflow. Brakes meet industry requirements D.O.T. FMVSS 571.106-10, SAE J1131, and SAE J2494-3 and are manufactured with Polybutlene Terephthalate (PBT) for chemical and UV resistance. Utilizing Synflex® Eclipse(TM) multilayer air brake tubing, fittings are used for medium- and heavy-duty truck, bus, and mobile off-highway air brake systems.

Molex Inc.    Lisle, IL 60532-1682
Jul 19, 2007 Designed to meet sanitary requirements of food, beverage, and pharmaceutical manufacturers, BradConnectivity(TM) Ultra-Lock(TM) comprises integrated cordsets, distribution boxes, and receptacles built on push-to-lock technology. Threadless, M12-compatible system features 316 stainless steel couplers with smooth surface to prevent accumulation of bacteria and contaminants. IP69K-rated radial seal is operator-independent and maintains constant pressure seal against moisture.

TE Connectivity Ltd.    Berwyn, PA 19312
Jul 02, 2007 Made of fire-rated plastic, AMP Connector Clamps secure and install nonmetallic sheathed cable to steel boxes or panels. Units accommodate 1 or 2 wires, are rated for 60 lb pull-out, and are available for ½ or ¾ in. knockout holes. Designed for plugging unused knockouts in boxes or panels, AMP Plugs fasten securely to any round open hole from ½-2 in. Offered in round or square, AMP Stud Bushings provide relief for wire pulling and prevent chaffing of wire insulation.

Kee Safety, Inc. (formerly Kee Industrial Products, Inc.)    Buffalo, NY 14206-2665
Jun 21, 2007 Available to fit 1-1½ in. dia pipe, Model 351 Ridge and Model 350 Eaves galvanized fittings have double set screws on truss outlet for pull-out resistance that holds structures together. Model 351 accommodates 1 vertical upright, 1 horizontal pipe, and 2 slope pipes that are at 125° angle, while Model 350 accommodates 1 vertical upright, 2 horizontal pipes (forming X-Y-Z axis with upright), and 1 slope pipe that is angled at 27.5° from horizontal pipe on same plane.

StockCap    Arnold, MO 63010
Jun 15, 2007 Designed to meet specific requirements of HVAC and medical professionals, Rubber Seal Plug comes with tabs protection option that aids in removal. Tapered end ensures that plug fits in tight spaces, while non-staining rubber does not damage copper, aluminum, or any other metallic tubing.

EGS Electrical Group    Skokie, IL 60077
Jun 05, 2007 Type AXB expansion fitting suits elongated conduit runs installed in areas subject to vandalism, theft, harsh weather, and wide temperature variations. Used to permit linear movement in conduit runs caused by thermal expansion, preventing conduit buckling or disconnection, AXB incorporates internal bonding jumper to facilitate installation and maintenance. No disassembly is required during installation, and outer casing slides open to view jumper for no-tools field inspections.