Heyco Stamped Products, Inc.    Toms River, NJ 08754
Apr 02, 2012 Available in straight-thru and 90° sweep styles with NPT threaded hubs, Heyco-Flex(TM) III Liquid Tight Fittings are designed for flexible, nonmetallic, liquid-tight tubing. Assembly is permanent between tubing and fittings, and products support use in wet and dry conditions as well as applications with high vibration or flexing. Nontoxic and UV resistant, fittings are rated for NEMA Type 3R applications as standard and NEMA 4/4X applications when used with Heyco-Flex III Tubing.

Heyco Products    Toms River, NJ 08753
Mar 26, 2012 Available in Straight-Thru and 90° Sweep styles with NPT threaded hubs, Heyco-Flex(TM) III Liquid Tight Fittings for flexible, nonmetallic, liquid-tight tubing are UV-resistant and nontoxic. Products, designed to accelerate and facilitate installation, provide permanent assembly. Nominally rated for NEMA Type 3R applications, fittings are rated for NEMA 4 and 4X applications when used with Heyco-Flex III Tubing and can be used in wet/dry conditions and high-vibration or flexing applications.

Heyco Products    Toms River, NJ 08753
Feb 27, 2012 Available with NPT, PG, and Metric Hubs, Threaded Hole Plugs provide liquid-tight seal up to 70 psi, are IP68-rated, and feature integral sealing ring that provides seal at mounting hole location to protect against contamination and moisture. Plugs are available to fit multiple hole sizes and feature hex-shaped head with slot for wrench or screwdriver. Constructed from electrically non-conductive Nylon 6/6, non-corrosive plugs resist oil and heat up to 221°F.

Flambeau    Baraboo, WI 53913
Feb 24, 2012 Measuring 2.25" (5.71 cm) and 3.50" (8.89 cm), fuel caps allow for low permeation levels below baseline EPA standard. Caps are made of durable nylon and acetal polymers and have ratchet design with consistent torque. With internal tether, or external tether option, and PSI pressure seal with neck, caps are available as non-vented for CARB applications or optional 1-way vent for EPA applications. Custom colors and decoration available.

LPR Global    Toronto, ON M5S2R4
Feb 20, 2012 Made of aluminum alloy, with lead content less than 0.01%, Tube Fittings and Valves are installed using threaded lok-type connection method, with no welding required. Units provide clear visual confirmation of installation, guaranteeing airtight sealing. Available in ¼-¾ in. sizes, fittings have anodized surface that optimizes hardness as well as corrosion and wear resistance. Ferrules and O-rings are specially designed to be used with R22 and R410A refrigerants and oils.

Suncor Stainless, Inc.    Plymouth, MA 02360
Dec 28, 2011 Available to fit variety of wire rope sizes ranging from 1/32-½ in., Machine Swage Fittings are precision machined from grade 316 stainless steel and come in variety of styles including swage eye, swage jaw, plain ball, single shank ball, and double shank ball. Fittings are primarily used for marine and industrial rigging as well as applications where wire rope assemblies are needed.

Advantapure, Div. Of NewAge Industries    Southampton, PA 18966
Dec 02, 2011 Providing entire single-use molded manifold assemblies manufactured from TPE, AdvantaFlex® biopharmaceutical grade TPE is offered as molded Tri-Clamp® fittings, BioClosure(TM) container sealing systems, and connections such as wyes, tees, crosses, and reducers. Molded connections and container seals accommodate needs of those who require alternative to silicone but still desire batch fill or sampling manifold with molded connections and only one fluid contact surface.

Bridgeport Fittings, Inc.    Stratford, CT 06497
Sep 28, 2011 Mighty-Bite(TM) Push-EMT® fittings accelerate and facilitate process of connecting EMT conduit; installation requires contractor to push fitting onto conduit to obtain secure connection. These cULus-Listed, U.S.-manufactured products are constructed of corrosion-resistant zinc. Removable and reusable, fittings feature precision cast threads and reversible zinc serrated locknut.

Dynamic Sealing Technologies, Inc.    Andover, MN 55304
Sep 20, 2011 Featuring Tri-Clamp© sanitary connections, SCS Series meets specifications of rotary filling applications used in beverage bottling, dairy, distillery, cosmetics, and pharmaceutical industries. Units incorporate CIP-compliant ports for cleaning flushes and internal flow lines, minimizing fluid stagnation points. All models feature FDA approved seals and are available in variety of passage and ferrule sizes. Metric version with DIN 405 threaded ferrule connection is also available.

Watts    North Andover, MA 01845
Sep 16, 2011 Designed for home sprinkler systems, Residential Fire Protection line includes RF PEX(TM) Tubing, which features distinctive orange stripe, enabling inspectors to visually follow tubing throughout installation. Line also includes Lead Free PEX(TM) Fittings and Lead Free RF PEX(TM) Sprinkler Fittings, which accept all standard ½ in. residential sprinkler heads and will work with variety of sprinkler head brands.

Advantapure, Div. Of NewAge Industries    Southampton, PA 18966
Aug 30, 2011 Designed for pharmaceutical, biologics, food and beverage, and chemical fluid flow applications, sanitary hose fittings include stainless steel, silicone, TPE, Hytrel®, and polypropylene options. Fittings mate with hose made from silicone, PTFE, FEP, PVC, EPDM, TPR, and TPE and are supplied attached to hose/tubing. Depending on type, fittings are offered in sanitary, pipe thread, and cam and groove styles; mini and standard Tri-Clamp styles are also available.

R & M Energy Systems    Houston, TX 77060
Jul 29, 2011 Suitable for installation on older 150H(TM) BOP models that currently have wing caps, Hercules® Lugless 150H(TM) BOP Cap has lugless end caps that allow operations to use wrench rather than hammer. Unit can be operated with standard 24 or 36 in. pipe wrench, 36 in. adjustable wrench, or 3 in. wrench. Product provides security for operators, secure sealing without leakage, and optimized service life.

Dynamic Sealing Technologies, Inc.    Andover, MN 55304
Jun 07, 2011 Featuring aluminum construction with stainless steel shaft for corrosion resistance, SPS Series can be mounted in bore of EST Slip Rings for integrating single fluid passage with power, signal, and data transfer. Units feature max pressure of 200 psi, max rotational speed up to 100 rpm, and max temperature of 350°F. Six models are available with overall OD from 1.500-2.750, overall length from 2.380-3.130 in., and passage size of 0.125-1.000 in.

Hayward Industrial Products Inc., Hayward Flow Control Systems    Clemmons, NC 27012
May 13, 2011 Featuring PVC upper and lower body construction with 17-7PH stainless steel wave spring, CCP Series Tank-Tite(TM) Compression Fittings provide constant load on gasket of bulkhead fitting to overcome and compensate for tank wall expansion/contraction due to changes in temperature and/or pressure within tank. Fittings also simultaneously impart constant load on bulkhead fitting nut, which minimizes possibility of nut loosening due to vibration within system.

Hayward Industrial Products Inc., Hayward Flow Control Systems    Clemmons, NC 27012
May 12, 2011 Rated to 150 psi, BFAS Series Tank Adapters offer safe pipe connections to thermoplastic and metal storage tanks. Fitting design, which features short pattern barrel in PVC, CPVC, or PP and standard sized flange, also includes left hand threads to prevent fitting from unscrewing. Able to be installed by one person, products have hex body and FPM or EPDM gasket seal and come in sizes from ½-3 in. with either Socket x Thread or Thread x Thread end connections.

Meissner Filtration Products, Inc.    Camarillo, CA 93012 8760
May 02, 2011 Customized to end-user requirements regarding connections, tubing material, and various other components, BioFlex(TM) assemblies ensure secure fluid transfer in critical biopharmaceutical processing applications. Single-use tubing and filter/tubing assemblies offer flexibility for single-use systems but can also be used in conventional/hybrid facilities to connect single-use and stainless steel processing equipment. Assemblies can also be integrated with sterilizing-grade filter capsules.

Thomas & Betts Corp.    Memphis, TN 38125
Apr 14, 2011 Featuring swashplate design, STAR TECK EXTREME DIRECTOR(TM) Cable Fitting is adjustable from 90-180° to minimize installation time and is available in ½ and ¾ in. NPT hub sizes. Its full circular bore eases cable insertion while alignment guides serve as reference points to ensure fittings are installed at same angle. Stainless steel grounding ring with dual sets of grounding devices enables 360°, long-term grounding, and product also has non-corrosive aluminum body.

Brennan Industries, Inc.    Cleveland, OH 44139
Apr 06, 2011 Hydraulic fittings and adapters feature Brennan Black® coating, a blend of fluoropolymer, engineered plastics, and corrosion inhibitors that enables properties such as low friction, strong adhesion, and resistance to wear and abrasion. In addition to corrosion, fitting and adapter coatings are resistant to chipping as well as weather, sunlight, and salt water. Products are also protected over temperature range of -420 to +500°F.

NewAge Industries Inc.    Southampton, PA 18966
Mar 10, 2011 Available in acetal copolymer as well as brass, Newloc® push-to-connect fittings accelerate connections to rigid and semi-rigid tubing. Products offer instant, leak-proof connections with no flow restrictions as well as full vacuum rating to 29.9 in./Hg. While plastic versions, certified for use with food equipment materials (NSF-51) and potable water (NSF-61), are suited for pneumatics, brass versions handle temperatures to 200°F and max pressure ratings to those of connected tubing.

J. W. Winco, Inc.    New Berlin, WI 53151
Feb 17, 2011 Series AN 350 Tube Expander Fittings are comprised of metric-sized, RoHS-compliant fittings made of black reinforced polyamide plastic with nickel-plated brass bushings. Designed for 25 mm OD x 1.5 mm wall thickness square tubing, products are available with M8 x 1.25 or M10 x 2.5 threads. Typical applications include bracing conveyor walls to mount chain return components.