Electrical Equipment & Systems, Fluid & Gas Flow Equipment

Pulling Elbows make wiring pulls at right angles.

October 14, 2016

Manufactured in CF8M (316 SS), pulling elbows are designed for use with rigid conduit. These products, which make wiring pulls at 90° bends in conduit system, can assist in instances of sharp bends and allow straight pull in either direction. Each pulling elbow comes with Type 316 SS cover, neoprene gasket, and Type 316 SS screws.
Read More

Fluid & Gas Flow Equipment

Viega's New 45-Degree Elbows For Viega PEX Press Systems provide flexibility for larger tubing.

October 13, 2016

Available in 1 1/2" and 2" sizes, Viega PEX Press 45-degree elbows feature Viega's patented Smart ConnectR feature, which allows water to flow past an unpressed fitting. Suitable for use in commercial applications, Viega PEX Press is molded from Radel-RR, a superior plastic material. Factory assembled with attached stainless steel sleeves with three view holes, 45-degree elbows can be used with all Viega tubing, including: ViegaPEXTM, ViegaPEX Ultra, and Viega FostaPEXR. Read More

Fluid & Gas Flow Equipment

T&B® Fittings Stainless Steel Conduit and Fittings meet ASTM A-321 and SA-312 standards.

October 7, 2016

Suitable for food and beverage market, T&B’s 45- and 90-degree elbows and 12-inch nipples, comes in both Type 304 and Type 316 stainless steel. Resistant to extreme corrosion and chemicals, Type 304 stainless steel has five times the service life and Type 316 stainless steel eight times the service life. Presented with National Pipe Thread for easy installation, stainless steel conduit and fittings are durable, sturdy, easy to install and low in maintenance. Read More

Fluid & Gas Flow Equipment

Capped Elbows are designed for use in hazardous locations.

June 23, 2016

Available for rigid wiring systems in hazardous locations, Malleable Iron Capped Elbows come in ½, ¾, 1, and 1 ¼ in. trade sizes and are UL listed for Class I, Group C/D; Class II, Group E/F/G; and Class III environments. These explosionproof products, which feature malleable iron construction with bright electro-zinc finish, provide pull-in capacity and 90° NPT threads for use with rigid or IMC conduit. Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products, Packaging Equipment

Connectors and Plugs serve commercial and municipal applications.

June 3, 2016

Used with Viega PEX Press system, PEX Press test plugs (3/8–1 in., 1 ¼ in., and 1 ½ in.) have Smart Connect® feature. Also made of Radel R, 45° polymer PEX press elbows come in 1 ½ x 1 ½ in. and 2 x 2 in. sizes. PEX Press bronze, 90° flare elbows (¾ and 1 in.) and PEX Press reducing tees (1 ½ x 1 ½ x ¾ in., 1 ½ x 1 ¼ x 1 in., and 1 ½ x 1 ¼ x 1 ¼ in.) are constructed from Zero Lead™ bronze. Usable with ViegaPEX™ tubing, PEX pipe supports come in 10 ft lengths in 1, 1 ¼, 1 ½, and 2 in. dia. Read More

Fluid & Gas Flow Equipment

Aluminum Deflection Elbows come in diameters to 12 in.

April 29, 2016

Offered in tube and pipe sizes from 1.5–12 in., Smart Elbow® Deflection Elbows are suited for dilute-phase and dense-phase pneumatic conveying systems. Spherical chamber protrudes partially beyond desired 90° or 45° pathway, which causes ball of material suspended in air to rotate, gently deflecting incoming material around bend without impacting elbow wall or generating heat. Products help eliminate abrasive wear, breakage of friable materials, and plugging of heat-sensitive materials. Read More

Electronic Components & Devices, Fluid & Gas Flow Equipment

Loadbreak Elbows feature Rural Utilities Service acceptance.

October 13, 2015

Elastimold® 200 A loadbreak elbows feature Rural Utilities Service (RUS) Acceptance, which authorizes use of these 15 and 25 kV rated products in rural infrastructure construction and improvements. Loadbreak elbows and bushings are used for plug-in connections of underground cable to transformers, switchgear, and junctions to enable disconnection when switching load currents. Along with rigid probe support, features include seal system and range flexibility. Read More

Fluid & Gas Flow Equipment

Male Swivel Elbow supports food processing applications.

September 24, 2015

Made of nickel-plated brass, Male Swivel Elbow offers resistance to UV exposure, stress cracking, abrasion, and corrosion. Pro-Fit®  thread design allows assembly into female NPT as well as BSP forms. Design also eliminates exposed threads and fits into tight spaces, making it suitable for food processing, hygienic, and wash-down applications. In addition, captured Teflon sealing ring provides reusable shoulder seal without risk of thread sealant contamination. Read More

Fluid & Gas Flow Equipment

Universal Conduit Elbow enables 4:1 SKU reduction.

April 11, 2014

Replacing 4 conduit body configurations, T&B® Rigid Fittings BlueKote® Universal Conduit Elbow (LU) Form 8 enables fiber-optic cable to be run in ¾ in. system, instead of 2 in. system, and maintain cable bend radius. Angled covered port facilitates wire pulling and uses standard covers. While UL listing as enclosure permits internal splices, rating for 40% wire fill avoids need to de-rate system. BlueKote 4-layer protection provides internal and external corrosion resistance. Read More

Fluid & Gas Flow Equipment

Pinless Syphon Elbow suits steam-heated rotating cylinders.

August 5, 2008

Featuring integral locking mechanism that secures elbow into position, 45° Syphon Elbow is intended for installation on blind rolls or rolls with hand hole access. All components of elbow are constructed of stainless steel to provide corrosion-resistance. In addition, 45° angle results in less cantilever weight compared to long bent syphon pipe, causing less stress on horizontal syphon pipe thread connection. Read More

Fluid & Gas Flow Equipment

Flow Conditioner eliminates asymmetrical flow profiles.

March 31, 2004

VOREL(TM) 90° Elbow Flow Conditioner optimizes pump performance by eliminating flow anomalies such as process media swirl associated with unconditioned, standard elbows. Flow stream enters pump in uniform and equally distributed pattern. Anti-swirl and inclined vortex-generating profile correction tabs, projecting from inside pipe surface, generate vortices that accelerate and amplify natural pipe effects to create uniform, non-swirling, symmetrical flow profile. Read More

  • 1