Fittings

Related Categories
Fluid & Gas Flow Equipment, Mechanical Components & Assemblies

IP67 Bulkhead Housing Sets New Connector Baseline.

July 2, 2015

In locked state, Han® B IP67 bulkhead mounted housings provide IP66 and IP67 protection to allow temporary, full immersion in water. Flange protects gasket seal, preventing water from penetrating connector, while circumferential collar prevents seal from sliding inwards or outwards and thereby provides additional protection against water ingress. Available in 6B, 10B, 16B, and 24B sizes, housing uses Han-Easy Lock® locking system to maximize contact pressure. Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment, Mounting & Attaching Products

Strain Relief Fittings meet pullout requirements without external clamping.

June 30, 2015

Kopex-Ex™ ISR™ industrial strain-relief fittings are intended for use with tray cable, portable cords, and other unarmored cables in industrial applications, including drill rigs in oil and gas processing industry. While facilitating and accelerating installation, feature integral clamping mechanism enables full compliance with IEC pullout requirements without external clamping. Products carry IEC Ex, ATEX, CSA, and UL certifications. Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products

Luer Lock to Barb Connectors feature single-use design.

June 22, 2015

Offered in natural polypropylene or clear polycarbonate, Winged Female Luer Lock to Barb Connectors mate to any standard male luer. Barbs are available in 3/32 in. OD and 1/8 in. OD sizes. EtO and Gamma sterilization compatible, single-use connectors feature ergonomic wing design that provides optimized grip, facilitating connection and disconnection. Read More

Fluid & Gas Flow Equipment, Mechanical Power Transmission

EMT to FMC Transition Couplings help contractors conserve time.

May 26, 2015

Available in ½–2 in. in die cast zinc and 2 ½–4 in. in zinc plated steel, Mighty-Merge® EMT to FMC/Greenfield transition couplings provide dimensional flexibility when transitioning between raceways. Design negates need for contractors to assemble multiple fittings or mount box to transition between raceways. While EMT to FMC fittings (½–2 in.) are cULus Listed, EMT/Rigid to FMC fittings (2 ½–4 in.) are cETLus Listed. Read More

Fluid & Gas Flow Equipment, Electrical Equipment & Systems

Cable Tray Fittings target confined area applications.

April 15, 2015

Offered in left or right configurations, T&B® Cable Tray Helix™ Fittings ease transitions between horizontal and vertical cable tray runs, especially in confined areas and near walls. Units come in aluminum, pre-galvanized steel, and stainless steel in 12 and 24 in. widths with 6 in. side rails. Available pre-assembled, fittings enable installers to secure and organize cable runs without needing to position cable tray assembly to make room for transitional fittings. Read More

Packaging Equipment, Fluid & Gas Flow Equipment, Machinery & Machining Tools

Composite Frac Plug fosters increased milling efficacy.

April 3, 2015

With 97% premium composite blend, TruFrac® increases efficiency of plug-and-perf completion operations by reducing time on location. Accelerated run in-times and reduced mill-out are due to limited metal content and reduced cutting size, while sealing capability enables use in environments with temperatures to 300°F and pressures to 10,000 psi. Plug can be used in single- and multiple-zone stimulation operations in vertical, deviated, horizontal, or multilateral wells. Read More

Fluid & Gas Flow Equipment

Polymer Fire Protection Fittings offer facilitated installation.

April 3, 2015

Intended for NFPA 13D fire sprinkler installations, Viega PEX Press UL-listed fire protection fittings are available in ¾ and 1 in. sizes and 4 configurations: straight adapters, elbows, tees, and wall tees. Mounting bracket facilitates installation by enabling use with all sprinkler pendant styles and every sprinkler configuration. Wall tee fitting does not require bracket and is designed for applications to feed back-to-back rooms with one plumbing line and one fitting. Read More

Electrical Equipment & Systems, Electronic Components & Devices, Fluid & Gas Flow Equipment

BNC Bulkhead Adapter meets weatherproof requirements.

April 3, 2015

Incorporating glass bead that hermetically seals connector to withstand 100 psi leak test, Model Z-1142 may be used in IP67 or IP68 applications in mated and unmated condition. All interface dimensions are designed to IAW MIL-C-39012 specifications and overall dimensions to UG-492D/U specification. Manufactured with silver-plated brass body and gold-plated center contacts, adapter features 50 Ω impedance and is rated at DC to 4 GHz with low reflection. Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment

Push-In Liquidtight Fittings simplify installation onto conduit.

February 18, 2015

Without requiring disassembly, Quick-Connect™ Liquidtight Fittings install onto liquidtight flexible metal conduit via 2-step process of pushing conduit into fitting and tightening gland nut. Push-in design, which accelerates installation, also helps protect electrical systems from liquid ingress, corrosion, and extreme temperatures. Captive sealing rings available from 3/8–1 in. in straight, 45° and 90° configurations. Installation method also helps reduce dropped/lost/damaged components. Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment

Flexible Conduit and Fittings feature liquid-tight design.

February 13, 2015

For crush and corrosion resistance, Heyco-Flex VI Liquid Tight Electrical Conduit features PVC-jacketed, continuously interlocked hot dipped zinc galvanized steel core. It is approved for both exposed and concealed locations, direct burial and in concrete. Heyco-Flex VI Liquid Tight Conduit Fittings, made of nickel-plated brass, come in straight-through and 90° sweep styles with NPT hubs. Corrosion-resistant fittings have insulated throat to prevent wire damage during installation. Read More

Fluid & Gas Flow Equipment

Stainless Steel Nipples suit sanitary applications.

January 19, 2015

Available in 40 individual sizes from 1/8–3 in. diameter, Schedule 40 Stainless Steel Nipples are suitable for use in both sanitary and industrial applications ranging from dairy and food processing to cosmetics, chemicals, and water treatment operations. Stainless steel 316 conforms to ASTM A312 while dimensions and ends conform to ASTM A733, and threads conform to ASTM B1.20.1. Read More

Fluid & Gas Flow Equipment

Pipe Test Cap accommodates angled cuts via deep socket.

January 13, 2015

With 1 in. deep socket, Deep Techno Cap™ ensures users of ample surface area for performing solvent weld to pipe – even if pipe is cut at angle. Test cap, tested to 5 stories of head pressure (22 psig), is in PVC or ABS in sizes from 1.5–4 in. This product offers end-users alternative to heavy-duty Schedule 40 DWV end cap, and design is safer than that of metal wing caps as well as flexible caps with hose clamps.
Read More

Fluid & Gas Flow Equipment

Push-On Hose and Couplings negate need for tools during assembly.

January 5, 2015

Intended for low-pressure applications, Push-On Hose and Push-Loc Hose Couplings facilitate and accelerate insertion of Push-On fittings into hose for tight fit without requiring use of any special crimping tools. Push-On hose, which varies in diameter and comes in 250 and 700 ft length reels, maintains tight grip under constant pressure up to 250P psi for leak-free operation. Precision machined of corrosion-resistant brass, Push-Loc Hose Couplings come in 22 types and various sizes. Read More

Fluid & Gas Flow Equipment, Packaging Equipment

Enclosure Hole Plugs offer tool-free, single-person installation.

December 23, 2014

Assembled without any tools, AMHS series plugs existing, unwanted holes in fiberglass and steel electrical enclosures. Elements of construction include low-profile interior nut and exterior plug, and products come in standard hole sizes for pilot lights, pushbuttons, and conduit fittings. Suited for chemical, water, and food industries, these enclosure hole plugs are designed for simple installation in large enclosures that can be completed by one person. Read More

Fluid & Gas Flow Equipment, Electrical Equipment & Systems

Transition Couplings range from 1/2 to 2 in.

December 16, 2014

Made of die cast zinc, 4360-DC Raintight EMT to Liquid Tight Transition Couplings eliminate need for contractors to assemble multiple fittings, or mount box, to transition between raceways. Couplings are suited for connecting to HVAC systems, generators, transformers, and other rooftop equipment. In addition, fittings can be used when transitioning between solar arrays and inverters. Read More

Fluid & Gas Flow Equipment

Preformed Copper Push Fittings feature no lead design.

December 2, 2014

Suited for permanent or temporary plumbing applications, PDQ™ (Plumbing Done Quickly) No Lead Push Fittings are available in all common fitting sizes from ½ through 2 in. for PEX, CPVC, copper, and PERT. All materials used in PDQ system are dezincification resistant as well as resistant to stress corrosion cracking. Fittings offer alternative to FitQuick™ fittings, which previously used leaded materials. Read More

Fluid & Gas Flow Equipment

Air Nozzle Swivel Fittings facilitate precision blow off.

November 6, 2014

Available in 3 sizes, Type 316 Stainless Steel Mini Swivel Fittings facilitate position adjustment of any 316SS or PEEK thermoplastic mini Super Air Nozzles. These 1/8 MNPT Mini Swivel Fittings provide smallest nozzles 50° total angle of adjustment for maximum effectiveness and also works with M4x0.5 Atto Super Air Nozzle, M5x0.5 Pico Super Air Nozzle, and M6x0.75 Nano Super Air Nozzle. Use lends to precise, focused blowoff for applications in tight spaces or requiring minimal compressed air. Read More

Fluid & Gas Flow Equipment, Electrical Equipment & Systems, Green & Clean

Conduit and Fitting System protects wires and cables.

October 15, 2014

HelaGuard Non-Metallic Conduit & Fitting System provides flexible and customized solution for protecting wires and cables from dirt, debris, UV light, and abrasion. Available in solid and slit models, conduits come in various materials, including flame-retardant and UV-resistant nylons. Reinforced spiral and smooth tubing are designed with smooth, inner bore. Offered in snap-on and compression fit options, non-metallic fittings come in straight, elbow, flange, and T-connector styles. Read More

Fluid & Gas Flow Equipment

Hydraulic Hoses and Fittings meet ISO 18752 specification.

October 7, 2014

Comprising 5 hydraulic hoses and 2 fittings, GlobalCore Series is designed to meet most common working pressures in industry—3,000 to 6,000 psi in sizes 4–32 in. Hoses are compatible with Parkrimp family of crimpers and feature no-skive, abrasion-resistant covers, minimizing downtime and extending intervals between replacements. Read More

Fluid & Gas Flow Equipment

Miniature Solenoid Valve features high-density interface.

September 18, 2014

Featuring 2-port normally closed design, Ultra Miniature Solenoid Valve weighs less than 2.5 g and is available in plug-in configuration. Unit offers low internal volume of 28 µL, operating temperature range of 40–120°F, and operating pressure range of 45 psid (inlet) and 10 psid (differential). Leakage is less than 50 µL/min at 5 psig. Read More