EXAIR Corporation    Cincinnati, OH 45249-1621
Jan 22, 2013 Featuring 54 in. wide laminar airstream, Super Ion Air Knife provides optimal cleaning up to 20 ft away. Unit uses 16.7 scfm of compressed air at 5 psig to entrain high volumes of surrounding room air. Electrically powered static control bar fills uniform sheet of air with high concentration of positive and negative ions, neutralizing static electricity while blowing away dust and particulates from printed surfaces, paper, plastics, and 3D shapes. Force can be adjusted from blast to breeze.

EXAIR Corporation    Cincinnati, OH 45249-1621
Jan 27, 2012 To prevent jamming, tearing, and shocks, Deluxe Super Ion Air Knife Kits use laminar sheet of air to neutralize static electricity while blowing away dust and particulates from printed surfaces, paper, plastics, and 3-D shapes up to 96 in. across. Units require 3.7 scfm of compressed air/ft of length at 5 psig. Electronic Flow Control turns on air knife only when it is needed. Power supply, EFC(TM), universal mounting system, shim set, filter separator, and pressure regulator are included.

EXAIR Corporation    Cincinnati, OH 45249-1621
Jan 31, 2011 Long Super Ion Air Knives neutralize static electricity and blow away dust and particulates from printed surfaces, paper, plastics, and three-dimensional shapes up to 96 in. across. Products produce wide laminar airstream full of static eliminating ions, which is effective at high speeds and up to 20 ft away. Featuring adjustable force from blast to breeze, units have shockless design and no moving parts. They are available in 60, 72, 84, and 96 in. lengths.

Streamtek    Charlotte, NC 28208
Mar 05, 2010 Powered solely by compressed air, AIR KNIFE SYSTEM provides non-contact method for removing unwanted surface liquid, dirt, moisture, coatings, debris, contamination, static charge, and heat during manufacturing of conveyed parts/articles. It creates continuous laminar sheet/curtain/stream of airflow that can be controlled via standard pressure regulator. Most common material of construction is aluminum alloy, 303/316 stainless steel is also available.

EXAIR Corporation    Cincinnati, OH 45249-1621
Feb 12, 2010 Available in lengths from 3-54 in., PVDF Super Air Knife(TM) provides laminar curtain of air that can be used to blowoff, clean, and dry in highly corrosive environments not suitable for stainless steel. Unit consists of PVDF, Hatelloy® C-276 alloy screws, and PTFE shim to adjust force and flow of airstream. Components offer resistance to UV light, inorganic chemicals, solvents, ozone, weather, fungi, chlorinated hydrocarbons, highly corrosive acids, weak bases, and salts.

EXAIR Corporation    Cincinnati, OH 45249-1621
Dec 04, 2009 Producing laminar sheet of airflow that is infinitely adjustable to blowoff, dry, or cool surfaces up to 96 in., Long Super Air Knives minimize compressed air use by entraining 40 parts room air to 1 part compressed air. Units feature 1.75 x 1.44 profile with compressed air inlets located on each end and bottom to permit mounting in tight spaces. Available in 60, 72, 84, and 96 in. lengths, air knives come in aluminum, Type 303 SS, or Type 316 SS and have no moving parts.

EXAIR Corporation    Cincinnati, OH 45249-1621
Feb 12, 2009 With ability to withstand temperatures up to 800°F, Type 316 Stainless Steel Super Air Knife can be used to create air barrier, blowoff, clean, and dry in highly corrosive environments. Product ejects small amount of compressed air through slotted nozzle, and this uniform sheet of high velocity air immediately pulls in surrounding room air and amplifies it at ratio of 40:1. Customizable unit is available in sizes from 3-54 in. and has noise level of 69 dBA.

EXAIR Corporation    Cincinnati, OH 45249-1621
Mar 31, 2008 Suited for parts, webs, and conveyors, 54 in. Super Air Knife produces laminar sheet of airflow to blowoff, dry, or cool wide surfaces. It entrains 40 parts room air to 1 part compressed air and at 80 psig, produces sound level of 77 dBA. With 1.75 x 1.44 in. profile, it has inlets on each end and bottom for mounting in tight spaces. Maintenance-free unit is available from 3-54 in. and is constructed of aluminum or SS withstanding up to 800°F.

EXAIR Corporation    Cincinnati, OH 45249-1621
Jan 25, 2008 Using 8.7 scfm of compressed air at 5 psig, 48 in. Super Ion Air Knife neutralizes static electricity while blowing away dust and particulates from printed surfaces, paper, plastics, and 3D shapes. Electrically powered static control bar fills uniform sheet of air with high concentration of positive and negative ions, cleaning up to 20 ft away. Force can be adjusted from blast to breeze, and there are no moving parts to wear out.

EXAIR Corporation    Cincinnati, OH 45249-1621
Aug 20, 2007 Directing compressed airflow to precise slotted orifice, 48 in. Super Air Knife creates uniform sheet of air across entire length that immediately pulls in surrounding room air. Air amplification ratios of 40:1 are produced. At 80 psig, sound level is just 69 dBA. Compressed air inlets are provided on each end and bottom of Super Air Knife to facilitate mounting. Multiple units can be mounted end to end without dead spots.

EXAIR Corporation    Cincinnati, OH 45249-1621
Oct 27, 2006 Providing positioning for air knives used to blowoff, dry, and cool, Universal Air Knife Mounting System features stainless steel construction that is suited for variety of industrial applications. Adjusting knobs lock pivoting joints in place and arm of mounting system provides maximum reach extension of 30 in. Assembly can be securely mounted to machine frame using 17/32 in. dia hole or by threading it directly into ½ in.-13 tapped hole.

Paxton Products, An ITW Co.    Cincinnati, OH 45242
Jun 07, 2004 Air Knife Systems use uniform sheet of high-velocity air to clear debris or shear off moisture at product speeds up to 1,000 fpm. They deliver constant, pre-determined volume and velocity of air specific to each application. Centrifugal blowers feature automatic belt tensioning system combined with precision dynamic balancing to generate clean, dry, oil-free air.

EXAIR Corporation    Cincinnati, OH 45249-1621
Dec 23, 2003 Super Ion 9 in. Air Knife uses small amount of compressed air to establish uniform sheet of airflow that is filled with positive and negative ions from electrically-powered ionizing bar. Air consumption is 3 scfm at 5 psig for normal operation. Available in lengths up to 48 in., air knife can remove static electricity from paper, plastics, and other product surfaces where poor print quality, dust attraction, tearing, or jamming are a problem.

Spraying Systems Co.    Wheaton, IL 60189 7900
Jul 22, 2003 WindJet® Air Knife features protruding leading edge that extends 1/8 in. beyond air slot along length of knife. Flow of air is directed out of knife in uniform, high-volume straight stream, ensuring no spotting or blotching. Air knife lengths include 6, 12, 18, 24, 30, and 36 in. with .040 or .060 in. air slots. Supplied air is generated by Gast® regenerative blower assemblies available in 5, 10, 15, and 30 hp.

Nex Flow Air Products Corp.    Williamsville, NY 14221
Apr 04, 2003 Offered in sizes from 1-6 in. ID, Ring-Blade removes water, dust, and light oils from wire, cable, rope, and various types of extruded shapes. System uses Coanda effect to amplify air flow and reduce air consumption. Unit can be split and opened to allow for insertion of continuous extruded shape. Instant on/off with no moving parts provides for maintenance-free operation. Anodized aluminum or stainless steel versions are available.

Nex Flow Air Products Corp.    Williamsville, NY 14221
Apr 04, 2003 Air Blade Ionizer removes dirt and static charge from plastic parts. Product comes with fully shielded cable and repairable power supply. Optional static bar with three times nominal output eliminates static on difficult, highly charged surfaces. Ionizer is available in anodized aluminum or stainless steel for high temperature and food grade applications. Additional static bar is offered for wash-down applications.

EXAIR Corporation    Cincinnati, OH 45249-1621
Mar 05, 2003 Effective up to 20 ft away, 3 in. Super Ion Air Knife removes static electricity from plastics, webs, printed materials, and other product surfaces where dust, tearing, jamming, or hazardous shocks pose problems. It produces laminar sheet of airflow that floods area or surface with static-eliminating ions. Operating at noise levels of 50 dBA, it offers adjustable force and requires less than 1 scfm of compressed air at 5 psig for normal operation.

Paxton Products, An ITW Co.    Cincinnati, OH 45242
Oct 14, 2002 Sanitary Air Knives have food grade 304 or 316L stainless steel components, in-line HEPA filter, and clamp and sanitary butt weld fittings that meet 3-A requirements for direct food contact. Each system has wash down duty acoustical blower, dual filtration system, and two pre-filters on enclosure inlets. Polyester 2 micron filter/silencer mounted directly to blower inlet ensures that only clean filtered air is allowed to reach product surface.

Sonic Air Systems, Inc.    Fullerton, CA 92835
May 17, 2002 Sonic XE Air Knife or Air Nozzle System incorporates Rotary Air Coupling to allow air transfer from stationary supply piping to rotating air knife or nozzle assembly with no blower pressure loss. Rotation is infinitely adjustable from 10 to 200 rpm by setting thrust jet valves on main body, allowing multiple passes over product. Non-lubricated assembly ensures clean and dry air delivery. Applications include in-line, indexed, batch, and cabinet washers.