Asahi/America    Malden, MA 02148
Aug 06, 2010 Offering direct replacement for ISO-5752 short pattern metal butterfly valves, without any modification to existing piping system, Type 57LIS comes in 3-8 in. sizes with PVC body and PP disk for chemical resistance. Made of 316 stainless steel, shaft has full engagement over entire length of disk and is totally isolated from media. Applications include chemical processing, water and wastewater, landfills, irrigation, food processing, and mining.

Phoenix Contact    Harrisburg, PA 17111 0100
Aug 06, 2010 Available in male and female versions with either 3 or 4 positions, QUICKON connectors feature insulation-displacement technology that reduces installation times. Elimination of need to prepare wires and cables enables accelerated, vibration-resistant connections. To aid technicians who need to make quick on-site connections, these 2-piece connectors feature color-coded terminals. Products meet IP65/67 requirements and are rated for operation from -25 to +80°C.

Zero Gravity Filters Inc    Brighton, MI 48116
Aug 06, 2010 Used in conjunction with Maggie in-line separators, Smart Drum PLUS extracts contaminants from Maggie purge fluid and returns valuable fluid back to process. Fabricated from carbon steel, fully automatic magnetic system is epoxy coated with zero bypass design that consists of top/inlet tank and lower pan/drum tank with magnetic drum driven by motor gearbox. Single Smart Drum PLUS can accommodate purge from several Maggie systems.

GIW Industries, Inc.    Grovetown, GA 30813
Aug 06, 2010 Intended for use in hard rock mining applications, MDX pump operates at low specific speed to provide stable operations by harnessing variable flow conditions in mill circuits. Size of BEP sweet spot further ensures stable sump levels over flow variations, while also contributing to efficiency and extended equipment wear life. Slurry diverter technology is standard, and optional application of metal, rubber, or ceramic materials expands service alternatives for optimal wear life.

FasTest, Inc.    Roseville, MN 55113-1317
Aug 05, 2010 For accelerated, safe, repeatable connections to all types of transmitters, FasCal Lever series are hand-squeezed and inserted into ¼ in. threaded ports. Release of lever forms instant, leak-tight, high-pressure (5,000 psi max) connection, promoting productivity, safety, and calibration efficiency. Each stainless steel calibration connector has pressure-assisted, grip-and-seal design that facilitates connections to threaded profiles. Plug-and-play design eliminates tape and sealants.

SKF USA, Inc.    Lansdale, PA 19446
Aug 05, 2010 Serving as low-pressure pump filtration unit, SKF® Oil Conditioning Unit circulates oil in system to optimize lubrication performance. It removes contaminants from oil supply and enables desired temperature range to be consistently maintained. Available in filtration only and filtration with air/water cooler versions, product can perform continuously without constant maintenance. It connects directly to sumps, bearing housings, gearboxes, compressors, and other machines.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Aug 05, 2010 Providing 90V and 60V notches, quarter-turn Series SVB is suitable for use with gases and liquids that are compatible with wetted materials, such as CF8M, 316 stainless steel, PTFE, and TFM1600. Stainless steel valves feature pressure limit of 1,000 psi and temperature range of -30 to 400°F. ISO 5211 mounting pad allows direct mounting of pneumatic and electric actuators.

Acoustical Solutions, Inc.    Richmond, VA 23228
Aug 05, 2010 AudioSeal(TM) sound blanket line will include AlphaEnviro(TM) Baffle, AudioSeal(TM) Drop Tile Ceiling Sound Barrier, AlphaEnviro(TM) Wall Panel, AudioSeal(TM) Pipe and Duct Wrap, AlphaFlex(TM) Banner, and PolyWrap(TM) Baffle. Each contains Knauf Insulations's formaldehyde-free Ecose Brand Fiberglass, which is manufactured from naturally occurring and/or recycled raw materials, bonded using a bio-based technology, and 100% recyclable.

Wilden Pump & Engineering Co.    Grand Terrace, CA 92313
Aug 04, 2010 Advanced(TM) Metal Series T1510 (Brahma(TM)) is comprised of air-operated double-diaphragm (AODD) pumps with bolted construction that provides total product containment. These completely submersible, 3 in. flap-valve pumps eliminate clogging concerns via their internal clearances and top-suction/bottom-discharge operation. Products support flow rates to 258 gpm and pressures to 125 psig, with max dry-suction lift capability up to 24.4 ft.

Alliance Plastics    Erie, PA 16510
Aug 04, 2010 Vented pipe caps as well as pipe and conduit open end pipe caps protect non-threaded and threaded NPT pipe ends as well as rigid metal and intermediate metal conduit. Manufactured from LDPE and MDPE, standard pipe caps protect pipe ends from damage and debris. Vented holes stop pressure build-up that would force caps off during storage/shipment. Available in 1/8-64 in. sizes to accommodate popular pipe sizes, caps offer push-on application to facilitate tool-free installation/removal.

KD Scientific Inc.    Holliston, MA 01746
Aug 03, 2010 Legato 270 syringe pump can hold from 0.5 µL up to 140 ml syringes, and deliver full volume in infuse and withdraw modes with both small and large syringes. Featuring continuous push and pull pump, 2 removable pins to adjust syringe mechanism, touchscreen interface, and TFT color display to present all pump operating parameters, RoHS compliant unit has accuracy of ±0.35% as well as 0.05% reproducibility.

Valco Instrument Co., Inc.    Houston, TX 77255
Aug 03, 2010 Suited for precision handling of liquids and/or gases, Cheminert Model M6 and M50 produce bidirectional pulseless flow with range of 5 nLpm to 5 mLpm and 1 µLpm to 25 mLpm, respectively. They are self-priming, are tolerant of any gas entering into fluid lines, and serve as replacement for syringe pumps. RS-232 and RS-485 protocols are incorporated into microprocessor-driven controller, and included software package controls flow rates, flow direction, and metered volumes.

Continental Disc Corporation    Liberty, MO 64068
Aug 03, 2010 Providing protection against overpressure conditions, SANITRX HPX(TM) scored reverse acting rupture disc can be pressurized from full vacuum up to 90% or 95% of rated burst pressure under normal operating conditions. This differential pressure relief device has instantaneous full-open, non-reclosing design is available with 90% or 95% operating ratios and range of burst pressures, materials, and sizes. Areas of use include pharmaceutical, biotech, and food and beverage industries.

Dolomite Centre Ltd    Royston SG8 5TW  United Kingdom
Aug 02, 2010 Developed for experienced researchers, modular Droplet Advanced System can produce over 10,000 monodispersed droplets per second with 20-250 µm dia. Flexible solution, featuring all required pumps, connectors, and chips, provides pulseless and stable liquid flow with 0-10 bar pressure range. Pressure-driven pumps and flow resistors enable precise control over flow rates and droplet size, and quick changes to flow conditions enable accelerated optimization of droplet parameters.

E Instruments International LLC    Langhorne, PA 19047
Aug 02, 2010 Hydraulic hand pump HHP 1000 includes transparent fluid chamber reservoir for viewing of fluid levels, fine adjustment vernier, pressure release valve, high/low selection knob stroke adjustment, and scissor action pump. Optional features included are hydraulic hose with fitting, carrying case for pumps, hoses and adaptors, and up to 5 set of adaptors.

Victaulic    Easton, PA 18040
Jul 30, 2010 Style 296A coupling for fiberglass-reinforced plastic (FRP) pipe engages into pre-manufactured Advanced Groove System (AGS) grooved built-up FRP pipe ends to form secure, rigid pipe joint for pressures up to 150 psi. Installed anytime, anywhere, and in any weather condition without special tools, coupling features FlushSeal gasket, available in Grade E EPDM, Grade S Nitrile, or Grade O Fluoroelastomer, with center lip that positions between pipe ends to ensure smooth flow path.

Lechler, Inc.    St. Charles, IL 60174
Jul 29, 2010 Available in choice of stainless steel or nickel-plated brass, AirMist(TM) Nozzle provides consistent, precision spray mist with very fine droplets created through collision of fluid and metered air. Unit comes in internal or external mix models and is especially appropriate for spraying applications that require coating, cooling, or humidification. Optional accessories for shut-off control and cleanout are available.

Precision Filtration Products    Pennsburg, PA 18073
Jul 29, 2010 Used on mobile refuelers or installed in refueling cabinets, FBO hydrocarbon fuel filter assemblies can also be used for diesel fuel dispensing pumps or as primary fuel-water filter separator for large diesel engines. Locking-ring collar attaches filter housing to aluminum die-cast filter head with 4 bolts, and slotted locking-ring collar accelerates cartridge change-outs. Closure hardware consists of stainless steel nuts, bolts, and washers with metal hand-knobs for maintenance.

Baltimore Innovations Ltd    Buckinghamshire SL8 5DT  United Kingdom
Jul 28, 2010 Indicating Silica Gel Breathers are available in 600 g units that utilize low-dust silica gel that changes from orange to green when breather needs to be replaced. They are used in power and transmission market on electricity sub-station inlets and in fuels sector for protecting against moisture contamination of fuel and oil in storage tanks. Products are 100% clear-sided for easy reading.

Saint-Gobain Performance Plastics, Tygon Application Specific Tubing    Akron, OH 44305
Jul 28, 2010 Flexible hoses and fitting series includes high-performance PTFE pigtail filling hoses with low permeation wall for oxygen filling as well as Oxy-Flex® Distance Volume Piece fittings. Using both in combination eliminates fire hazards during oxygen transfer. Featuring anti-whip armor casing, hoses and fittings restrict possibility of violent movement during any surge in pressure, and also offer complete gas containment in case of leakage.