Fluid & Gas Flow Equipment

Fluid & Gas Flow Equipment

Proportional Valves feature close tolerance spools.

Nov 08, 2001

DFW proportional, directional control valves can be used for reproducible control of actuator speed in rapid/slow speed profiling as well as smooth acceleration and deceleration. D1FW features flow rating to 12.5 gpm, while D3FW has flow rating to 45 gpm. Connection options include conduit boxes with wire leads, flying leads or DIN-type connectors. Read More

Fluid & Gas Flow Equipment

Hoses are ideal for half-bend radius applications.

Nov 08, 2001

Models 351TC and 351ST abrasion-resistant hoses, designed for 1/2 SAE 100R1 minimum bend radius applications, are available with MSHA-accepted Tough Cover or Super Tough polymeric cover. Both offer 4,000 psi constant working pressure in sizes that range from 1/4 in. to 3/4 in. I.D. They are constructed of oil-resistant, Nitrile-based synthetic rubber tube, with 2 braids of high-tensile steel wire... Read More

Fluid & Gas Flow Equipment

2-Way Poppet Valves feature bubble tight shut-off.

Nov 08, 2001

SV72 Series 2-way inert balanced-poppet solenoid valves are designed to control corrosive fluids by isolating metal components from operating media. They employ two rolling diaphragms that act as isolating barriers and balancing areas. SV72 valves feature bubble tight shut-off and are mountable in any position. They offer pressure ratings of 100 psi with a Cv of 4.0. Valves are available with 115... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Portable Tray Filters recycle, reclaim and reuse fluids.

Nov 08, 2001

Portable Tray Filters interchangeably filter 1 or several fluids. Sizes are available to fit on top of 55 gal drums or larger tank or pit sizes. When disposable fabric filter media is advanced to clean section, contaminated fluid may be introduced. Read More

Fluid & Gas Flow Equipment

Miniature Pneumatic Valve System has manual overrides.

Nov 08, 2001

Moduflex(TM) Miniature Pneumatic Valve System can be assembled in dual 3/2, 4/2 and 4/3 configurations in one island to meet application requirements (10 mm to 100 mm actuator bore sizes). Tie-rod connections are used to add or delete valves, as well as change valve function, tubing size or piloting. Moduflex Valve System consists of 2 valve sizes: 0.38 Cv and 1.13 Cv. Both have 2.5 mm stroke, 14... Read More

Fluid & Gas Flow Equipment

Soft Start Valves allow flow rates to 8.1 Cv.

Nov 08, 2001

PHS Series Solenoid Quick Dump Valves, available in 3/8 in. and 1/2 in. body sizes with flow rates up to 5.7 Cv, shut off incoming pressure while exhausting downstream pressure when solenoid is de-energized. PHSSA Series Auto Pilot Soft Start Valves, available in 3/8 in. body size with 1/4 in., 3/8 in., and 1/2 in. NPT ports, and flow rates up to 3.8 Cv, allow gradual filling of downstream... Read More

Fluid & Gas Flow Equipment

Oil Pump fits into drums and tanks.

Nov 08, 2001

Model 1737 1:1 ratio stub-style oil pump works with oils and non-corrosive liquids in industrial, manufacturing and automotive service shops. Pump fits drums and tanks with a 2 in. bung opening. It has maximum air pressure of 145 psi, working pressure of 100 psi, and self-lubricating pressure relief port. It comes with connecting hoses and an air line filter. Pump weighs 6 lb. Read More

Fluid & Gas Flow Equipment

Magnetic Drive Pump has stainless steel impeller.

Nov 08, 2001

Model TE-7-MD-SST magnetic drive pump can pump up to 52.5 gpm, liquid temperatures up to 250°F, and line pressures up to 150 psi. It offers leak-proof, seal-less magnetic drives, and is designed for in-line, non-submersible use. Fan-cooled, totally enclosed motor is thermally protected, and is available in 3/4 or 1-1/2 hp for use with specific gravities of up to 1.1 and 1.2 to 1.5,... Read More

Fluid & Gas Flow Equipment, HVAC

Isolation Systems protect against airborne contaminants.

Nov 08, 2001

AirShelter(TM) Isolation Systems use HEPA-filtered air to create contained, positive-pressure environments. Their main component is American Air Filter's AstroCel® II HEPA filter. The combination of positive pressure ventilation(PPV) and HEPA filtration provides filtration levels greater than 99.97% on 1 to 5 micron particles. AirShelter line includes ceiling and floor-mounted HEPA filtration... Read More

Fluid & Gas Flow Equipment

Butterfly Valves operate up to 200 psig.

Nov 06, 2001

Resilient seated butterfly valves offer phenolic backed cartridge seat to provide full rated dead-end service on all lug pattern valves. Torque values are minimized by use of 4 Teflon® bushings properly aligned down blowout proof shaft. Valves are manufactured with cast iron bodies; ductile iron nickel plated, aluminum bronze, or 316 SS discs; and Buna-N, EPDM, or Viton resilient seats. They... Read More

Fluid & Gas Flow Equipment

Adjustable Spray Nozzle spray coats powders and liquids.

Nov 06, 2001

Air-operated, VDF adjustable spray nozzle enables field operators to control spray pattern, material powder through-put, or droplet size by varying compressed air flowing through unit. Tapered exhaust end provides consistent, uniform spray without clogging or clumping. Straight-thru design is self-cleaning. Nozzle operates safely under pressures from 10 to 60 PSI. It can produce fine mist or... Read More

Fluid & Gas Flow Equipment

Multistage Pump delivers high pressures.

Nov 06, 2001

Model 3355 handles flows up to 1500 gpm and heads up to 1640 ft at pressures to 800 psi and temperatures to 280°F. It has heavy-duty bearing design and tapered bore seal chamber with internal seal flushing that eliminates need for external piping. Models are available in iron and 316 SS. Applications include high pressure industrial process services such as boilder feed, reverse osmosis,... Read More

Fluid & Gas Flow Equipment

Poppet Valves suit chemical dispensing applications.

Nov 05, 2001

SV72 Series 2-Way Inert Balanced-Poppet Solenoid Valves are designed to control corrosive fluids by isolating metal components from operating media. They employ 2 rolling diaphragms, which act as isolating barriers and balancing areas. Units offer pressure ratings of 100 PSIG with Cv of 4.0. SV72 valves, available with 115VAC, or 12 and 24 VDC coils, also feature inert construction, high flow and... Read More