Fluid & Gas Flow Equipment

Electrical Equipment & Systems, Fluid & Gas Flow Equipment

PEX Tubing offers corrugated sleeving option.

March 31, 2016

Available with inserted red or blue ViegaPEX™ Ultra Tubing in ½ and ¾ in. dimensions in 300-foot coils, black corrugated sleeving is suited for potable hot and cold water applications in commercial or residential in-slab installations or anywhere additional protection is needed. Tubing is rated at 100 psi at 180°F and 160 psi at 73°F. Offering chlorine and UV resistance, tubing... Read More

Fluid & Gas Flow Equipment

Compressed Air Monitor provides 2 alarm functions.

March 31, 2016

Using Smart Multi-Sense Probe that is inserted directly into pressurized compressed air stream, SENTRY continuously monitors dew point and pressure. Two alarm functions provide highly visible strobe light and highly audible pulsing sound if compressed air dew point increases or pressure decreases beyond user-configurable set points. Turnkey device is suited for industrial compressed air system... Read More

Fluid & Gas Flow Equipment, Laboratory and Research Supplies and Equipment

Bioreactor Tubing Kits accelerate turnaround times.

March 30, 2016

Custom made for use with benchtop bioreactors, AdvantaPure Bioreactor Tubing Kits consist of single-use tubing, preassembled with filters and connectors, at tubing lengths specified by customer for harvest, vent, sparge, and addition lines. Tubing is made from platinum cured silicone or AdvantaFlex® heat sealable TPE, and is certified free of animal-derived components. Assembled and packaged... Read More

Fluid & Gas Flow Equipment, Lubricants

Quiet Vane Pumps are designed for machine lubrication.

March 29, 2016

Used for closed loop lubrication systems in open gear drives and similar applications, ML series is built on Whisper Vane pump technology and optimized for machine lubrication. ML-4 can make up to 4.0 gpm, while ML-2 makes up to 2.6 gpm. Both have same dimensions, which facilitates configuration and integration while allowing interchangeable flow rates. Also included, integrated bypass valve can... Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Flanged Control Valve features modular housing.

March 29, 2016

Targeting industrial refrigeration retrofit market, Model ICV (H)A4A uses single common housing and 3 functional inserts: ICS-(H)A4A and ICS-(H)S4A pilot valve, ICM-HMMV and ICMHMMR motor valve, and ICLX-S9A two-step valve. Unit is rated for pressures to 754 psi and temperatures from -76 to 248°F. Valve is approved for use with ammonia, CO2, and other non-flammable refrigerants. Flexible... Read More

Fluid & Gas Flow Equipment

Metering Pumps offer brass manifold option.

March 28, 2016

Available in 6 models with max flow capacities from 26.5–894.6 gph and max pressure ratings from 1,000–2,500 psi, Hydra-Cell Metering Solutions Pumps are available with Alfas® copolymer elastomer diaphragms, which are resistant to extreme heat, acids, and alkalis. Spring-loaded, horizontal disk check valves and seal-less design enable pumps to handle viscous fluids and abrasive... Read More

Fluid & Gas Flow Equipment

Modular Valves suit industrial refrigeration applications.

March 28, 2016

Featuring modular housing that can be fitted with different functional inserts, ICF Flexline™ Series includes DN 50 size Model ICF 50-4 with 4 modules and DN 65 size Model ICF 65-3 with 3 modules. Both are pre-fitted with SVA-S stop valve in first module and 1 of 3 regulation valves in central module. All Flexline™ valves are suited for refrigerants such as CO2, ammonia, HCFC, and... Read More

Fluid & Gas Flow Equipment, Materials & Material Processing, Optics & Photonics, Services, Transportation Industry Products

ULA Atlas V Rocket Lifts off with 3D Printed Parts

March 25, 2016

MINNEAPOLIS REHOVOT, Israel - Stratasys Ltd. (Nasdaq:SSYS) supported a United Launch Alliance (ULA) Atlas V rocket, launched yesterday from Cape Canaveral Air Force Station in Florida. The Atlas V rocket flew serial production 3D printed parts enabled by Stratasys support and technology. The 3D printed parts highlight the ability to replace metal components with 3D printed lightweight... Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment, Mounting & Attaching Products

HPHT Wet-Mate Connector operates in extreme subsea environments.

March 22, 2016

Designed for operation in such environments as those found in subsea and downhole oil and gas applications, Elite Series Wet-Mate 3-channel, high-pressure, high-temperature (HPHT) connector is functionally tested to 1,034 bar and up to 150°C. This 15.8 mm dia connector, used to communicate electrical signals, features concentric contacts that are individually sealed within... Read More

Fluid & Gas Flow Equipment

High-Temp Flexible Line Pipe handles continuous service at 180°F.

March 22, 2016

Offered in pressure ratings up to 3,000 psi and diameters up to 8 in., FlexSteel High-Temp installs with end-fittings and midline connections utilizing swaging process to ensure pipeline integrity under demanding temperatures. Corrosion-resistant, high-temperature liner is strengthened by helically wound steel-reinforced layer, which also lends to flexibility and long-term pressure... Read More

Fluid & Gas Flow Equipment

Diesel Fuel Filter efficiently removes particulate and water.

March 22, 2016

Available for flow rates up to 210 gpm, Bulk Diesel Fuel Filter Skid | BDS3 incorporates one particulate filter and 3 coalescing filters for 99.5% single-pass particulate and water removal from ULSD 15 and similar petroleum fuels as well as biodiesel and all petroleum-based blends. This in-line unit is also available with optional water sump heater and automatic water drain with 5 or 20 gal... Read More

Fluid & Gas Flow Equipment

In-Line Coalescing Filter Element fits in space-restricted areas.

March 22, 2016

Offered as coalescing element for In-line Coalescing Filter (ICF), C184Z7VE is optimized for water removal and dirt holding capacity. These characteristics suit in-line, single-pass applications where space is restricted, such as on fuel dispensers, or where particulate and coalescing filter combination would exceed space allowances. Read More

Fluid & Gas Flow Equipment

PIRTEK West End a Sponsor of Richmond Dragway

March 21, 2016

Relationship with local racing venue leads to special “PIRTEK lane” designation Richmond, Virginia, USA – The racing season has begun at Richmond Dragway, which now features a “PIRTEK lane” for its racers. PIRTEK West End in Richmond is one of the local dragway’s newest sponsors. PIRTEK, the leader in fluid transfer solutions, provides hydraulic and industrial hose replacement sales... Read More

Fluid & Gas Flow Equipment, Material Handling & Storage, Mechanical Components and Assemblies

Techcon Systems' DPM Diaphragm Valve Wins the NPI Award for Dispensing Equipment

March 21, 2016

Garden Grove, CA – Techcon Systems, a product group of OK International, announces that it has been awarded a 2016 NPI Award in the category of Dispensing Equipment for its TS5624 Disposable Path Material Diaphragm Valve. The award was presented to the company during a Tuesday, March 15, 2016 ceremony that took place at the Las Vegas Convention Center during the IPC APEX EXPO. Can La,... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Bulk Diesel Fuel Filter Cart offers up to 70 gpm flow rate.

March 21, 2016

With 3-stage filtration that employs bag filter as well as particulate and coalescing filter, Bulk Diesel Coalescing Cart (BDC) is used for gross removal of microbial bloom contamination, rust, sludge, and water from bulk diesel fuel. Standard BDC is 25 gpm cart with available water sump heater and automatic water drain with 5 gal remote sump on cart; optional 70 gpm flow rate is also... Read More

Fluid & Gas Flow Equipment, Mining, Oil Drilling, Refining Products & Equipment, Mounting & Attaching Products

DSTI to Attend 2016 Subsea Tieback Exhibition in San Antonio

March 18, 2016

MINNEAPOLIS, Minn. - Dynamic Sealing Technologies (DSTI) will be showcasing its high pressure subsea and topside fluid swivel technology at Subsea Tieback Forum and Exhibition (SSTB) March 22 - 24, 2016 in San Antonio, Texas. "As the industry continues to face economic challenges, now, more important than ever, is the time for oil and gas leaders to focus on standardization and improving... Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

Electronic 2-Way NC Valves come in 7 mm cartridge package.

March 17, 2016

Compatible with air, gas, and fluids, SV series operate in temperatures up to 122°F and offer response time of <1 msec for accurate dosing of minute volumes. These direct actuating valves, featuring 700.0 coil resistance, draw 0.85 W typ, weigh  0.14 oz, and have expected life of >1 billion cycles. While wetted materials are of stainless steel, seal can be FKM or EPDM as standard or FFKM... Read More

Fluid & Gas Flow Equipment

Compact Block Valve offers 2.0 Lpm flow capability.

March 17, 2016

Primarily developed for use in chemical and semiconductor industries, iComLine® miniature ultra pure pneumatic valves occupy 20 x 20 mm area and exhibit high resistance to media. Various actuator and connection options, as well as a corresponding range of accessories, are available, and design enables use as multi-functional unit (as multi-port valve block). Actuator size enables valves... Read More

Fluid & Gas Flow Equipment

Seal-Less Water Circulation Pump has quiet, wet-rotor design.

March 15, 2016

Featuring stainless steel impeller, cast aluminum pump casing, and maintenance-free, brushless DC motor with 40,000 hr life, 6.7 lb ROTRON® SLP 2418 handles operating fluids from -40 to +95°C and serves demanding applications in diverse industries. Seal-less, IP67-rated, electromagnetically coupled design offers leakproof protection and ability to resist harsh environmental... Read More

Fluid & Gas Flow Equipment

Solids Handling Vortex Pumps have high-temperature design.

March 15, 2016

Handling clear or solids-laden liquids up to 200°F, 1–10 hp SVF High Temperature/High Endurance Submersible Vortex Pumps feature (NEMA) Class R motor insulation, rated for 428°F temperature rise, and offer motor protection via oil-lubricated double mechanical seal design with seperate lip seal. Vortex style impeller is mounted out of liquid flow path, and vortex pump design passes... Read More