Thermo Electron Corp.    Waltham, MA 02454
Nov 09, 2005 Click-On and Super Clean filter gas going into GC and GC/MS systems to 99.9999% pure or 6.0 grade, optimizing analyses, compound identification, and quantitation. Inline Click-On is equipped with reusable end fittings, which contain needle valves that seal gas line during filter replacement, preventing contamination. Super Clean cartridge gas filter utilizes base plates to hold cartridge and is available in various designs depending on gas combination to be filtered.

Martin Engineering    Neponset, IL 61345 9766
Nov 09, 2005 Providing positive-acting discharge mechanism, MARTIN® TORNADO Exhaust Valve, when installed on air cannon, fires in response to positive surge of air pressure sent by solenoid valve. As discharge requires positive signal, air cannon will not fire accidentally in response to drop in line pressure due to failure in air supply. Exhaust valve is available on BIG BLASTER® XHV Air Cannons as well as in retrofit kit for air cannons supplied by any manufacturer.

NewAge Industries Inc.    Southampton, PA 18966
Nov 09, 2005 Silicone tubing and reinforced hose are available in respective sizes from .012-¾ in. ID and 1/8-1 in. ID. Manufactured from non-toxic ingredients, silicone products withstand temperatures from -100 to +400°F. Tubing and hose are available as reinforced or unreinforced, platinum or peroxide cured, medical or non-medical grades. Sterilizable, reusable products are soft and flexible, with smooth surface that resists sticking, encrustation, and bacteria growth.

Edmunds Gages    Farmington, CT 06032
Nov 09, 2005 Column and CAG amplifiers are available with optional Auto-Air package, which conserves energy during everyday air gaging operations. Auto-Air(TM) automatic air valve switches on and off during air gaging applications and non-gaging time. Upon application of air tool, system senses pressure build-up and automatically switches air flow from minimal mode back to normal. Regulated air pressure stays active for predetermined amount of time after tool is removed from part or master gage.

Delavan Ag Pumps, Inc.    Minneapolis, MN 55403
Nov 08, 2005 Engineered to satisfy demanding agricultural applications, hydraulically driven HD Magnum Series cast iron and stainless steel pumps provide pressure to 145 psi at temperatures up to 140°F. Available in open and closed configurations, units are equipped with corrosion-resistant nylon impeller and Viton/ceramic seals, as well as oversized bearings and front and rear wear rings that balance impeller and maximize bearing life.

Metso Automation    Shrewsbury, MA 01545-8044
Nov 08, 2005 JAMESBURY® WAFER-SPHERE® Valves are equipped with filled super PTFE shaft seals, 316 SS/woven PTFE shaft bearings, PEEK-filled thrust bearings and extruder rings, and wear-resistant XTREME® seats. Units can provide up to 2 mil cycles with clean media such as oxygen, nitrogen, and hydrogen. Media conditions that preclude use of high-cycle option include media containing acids or chemicals, steam, and temperatures that exceed 325°F.

Easyfit, Inc.    Beachwood, OH 44122
Nov 07, 2005 Slip-on structural pipe fitting, Model EF42, is available to fit 3 standard pipe sizes of 1, 1¼, and 1½ in. Constructed of malleable iron and galvanized for corrosion resistance, fitting is designed to carry and support rails, as pipe is not joined within fitting. It can be used to build railings, racks, tables, frames, awnings, displays, store fixtures, carports, boat docks, playground equipment, safety barriers, and other tubular pipe structures.

Parker Hannifin Corp., Hose Products Division    Wickliffe, OH 44092 1797
Nov 07, 2005 With universal design manufactured to same specifications, regardless of location, 302/301 Worldwide hose features nitrile core inner that is compatible with various hydraulic fluids, including biodegradable ones. Dual-wire construction provides consistent form and function anywhere world-wide. Product fits hose sizes -4 to -32, is ISO 1436-1 Type 2SN rated, and is approved for use with 30 Series and 43 Series fittings.

Stafford Mfg. Corp.    Wilmington, MA 01887
Nov 04, 2005 Machined from steel or stainless steel, Stepped Bore Couplings feature 8 hex type clamp screws that provide holding power required for high-load applications. They come in 1- and 2-piece designs, with- or without keyways, as well as straight-through styles in 1-, 2-, and 3-piece configurations. Products connect shafts from ¼-2 in. bore, including inch-to-metric combinations, and will not mar shafts.

NewAge Industries Inc.    Southampton, PA 18966
Nov 02, 2005 Reinforced PVC tubing is available in sizes up to 2½ in. ID x 3 in. OD, while unreinforced PVC line includes 47 sizes with smallest being 1/16 in. ID. Polyurethane tubing ranges from 1/16-2 ID, with 2½ and 2¾ in. ID available on custom basis. Either material may be colorized, cut to specified lengths, or heat formed into shapes. Applications include air and gas lines, fluid discharge and transfer, protective jacketing, insulation sleeving, and powder transfer.

Rosedale Products, Inc.    Ann Arbor, MI 48103
Nov 01, 2005 Quick-access Model QII employs proprietary seal that seats precisely and insures positive seal. Hand wheel allows operation of clamping mechanism and eliminates sticking of clamp. Self-aligning design has no cams or parts that need field adjustment, and there is no wear on clamp surface. Housing meets ASME code requirements for 150 psi rating.

Brooks, E. J., Co.    Livingston, NJ 07039
Nov 01, 2005 Suited for use on marine containers, 3/8 in. Intermodal II Bolt seals are made from all-steel components with plastic-coated locking case, and insert that spins freely to ensure seal integrity. Locking ring ensures proper sealing engagement of bolt and locking case, and plastic cover clearly reveals any tampering attempt. Shoulder design of locking case provides 1/8 in. shroud that prevents insertion of tool or shim to disengage bolt from case.

Fluid Metering, Inc. (FMI)    Syosset, NY 11791
Nov 01, 2005 Positive displacement Model VMP features programmable dual stepper design that independently controls stroke rate and displacement. Touch screen interface provides setup of all fluid control parameters and can communicate with up to 16 pumps simultaneously. RS232 interface enables simultaneous computer control of up to 128 pump modules. Ultra Fine Adjustment of VMP allows for delivery of as little as 0.0144 µl per dispense with accuracy of 1% or better.

Festo Corp.    Hauppauge, NY 11788
Oct 31, 2005 With switching rates from 2-6 msec, Type MH2 valve requires 24 Vdc power supply and is controlled directly via PLC 24 Vdc/1 A output. Pressure-relieved valve, offering continuous running operation, has operating pressure range of -0.9 to 8 bar. In addition to 3/2-way NC and NO and 5/2-way configurations, product supports 2/2-way NO or NC configuration by blanking off port 3. Working port sizes include M7, G 1/8, G 1/4, or QS4, 6 or 8.

Festo Corp.    Hauppauge, NY 11788
Oct 31, 2005 Offering range of pneumatic connections, VTSA (Type 44) allows plug-in sub-base style valves to be added or removed as required; singlar sub-base for mounting individual valve is also available. Sub-bases are available in G or NPT ports, and terminal box, multipin, and fieldbus electrical interfaces can drive 32 solenoids. Along with 24 Vdc and 100 Vac coil voltage options, system lets user combine larger valves on single manifold without transition plate.

Rietschle Thomas UK    New Hythe, Kent ME20 6XS  United Kingdom
Oct 31, 2005 Targeted for use with SR 25 and SR15 peristaltic pumps, Thomasflex tubing produces constant flow rate and is resistant to oils, alcohols and acids. Tubing measures 4.8 x 1.6 mm, and depending on pump type and rotation speed, flow reaches between 0.3 and 690 ml/min. Suitable as replacement for Novoprene and silicone tubing, applications include tubing for pumps used in cleaning and disinfecting medical, chemical, and laboratory equipment.

Industrial Specialties Mfg, Inc.    Englewood, CO 80110
Oct 28, 2005 Offered in straight, tee, and elbow styles in various sizes from 1/8 through ¾ tapered NPT, fittings exhibit resistance to chemicals, handle pressures up to 200 psi, and withstand temperatures to 140°F. Suitable for air, vacuum, and liquid systems, series can be used in compressed air, plumbing, and oil feed applications as well as paint, sprinkler, cooling, dispensing, acetic, pharmaceutical, and disposal systems.

Parker Hannifin Corp., Tube Fittings Div.    Columbus, OH 43228
Oct 28, 2005 Offering nominal ratings from 65-480 microns, Protective Screen Fittings are available in sizes -4 through -12 for use with Triple-Lok® 37° flare and Seal-Lok(TM) O-ring face seal fittings. Constructed with stainless steel screen elements, -4 size features basket-style screen, while remaining sizes are dome style. Screen fittings are suited for gauge and instrumentation protection, as well as shielding of critical hydraulic components.

Humphrey Products    Kalamazoo, MI 49003
Oct 28, 2005 Series 310 and 410 valves are comprised of 1/8 in. ported, 3- and 4-way, direct-acting solenoid valves suited for pneumatic applications. Mounted in-line or on subbase, products have short-stroke balanced poppet design that requires no lubrication and tolerates impurities in air system to ensure positive sealing. Series 310 has 0.12 Cv, 410 Series has 0.14 Cv, and both are rated for air and inert gas from vacuum @ 28 in. Hg to 125 psig.

J. W. Winco, Inc.    New Berlin, WI 53151
Oct 28, 2005 Suited for hydraulic power packs, oil breather plugs are made of orange polyamide technopolymer plastic with oil label. Threaded body is black technopolymer plastic, and air filter is polyester polyurethane foam mesh. Resistant to solvents, oils, grease, and other chemical agents, plugs are offered with NPT pipe threads as standard or metric and BSPP threads upon request. Products are rated at continuous operating temperature of up to 250ºF.