Fluid & Gas Flow Equipment

Fluid & Gas Flow Equipment, Material Handling & Storage

Aero Tec Laboratories Appointed the Official Safety Fuel Bladder of JetPack Aviation

Aug 30, 2016

Aero Tec Laboratories (ATL) of Ramsey, NJ, the longtime innovators in crashworthy, flexible composite fuel bladder systems, is very pleased to announce that they have been chosen as the official fuel bladder supplier to JetPack Aviation. JetPack’s latest wearable flying device, the “JB-9”, is small enough to fit in the backseat of a car, yet powerful enough to take a pilot thousands of feet... Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools, Material Handling & Storage, Waste Management & Waste Handling Equipment

Jet Edge Bringing Latest 5-Axis Waterjet Cutting System to FABTECH

Aug 30, 2016

Waterjet Manufacturer Performing Live Waterjet Cutting Demonstrations, Showing Latest Waterjet Pumps, Closed Loop Water Recycling ST. MICHAEL, Minn. – Jet Edge, Inc., a leading manufacturer of ultra-high pressure waterjet technology, is bringing its latest precision waterjet cutting technology to FABTECH, Nov. 16-18 in Las Vegas.  Look for Jet Edge in Booth C25085 During FABTECH, Jet Edge... Read More

Fluid & Gas Flow Equipment

PipeMan Products, Inc. - Now Offers General Wire's Kinetic Water Ram

Aug 30, 2016

PipeMan Products, Inc. has become an approved distributor of the General Wire’s Kinetic Water Rams. Concord, CA – PipeMan Products, Inc. is proud to announce that it has become a distributor of the General Wire Kinetic Water Ram Series of Commercial Plumber’s Tools. The Kinetic Water Ram uses a burst of compressed air that drives a shock wave (kinetic energy) through water to break up... Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment, Mounting & Attaching Products

Extra-Long Raintight Connectors solves solar installation issue.

Aug 29, 2016

Available in ½, ¾, and 1 in. trade sizes, Mighty-Seal® 250-RT2XL fittings provide contractors with enough threads to attach to thick-wall (3/8+ in.), non-metallic combiner boxes while sill leaving enough threads afterwards for optional grounding bushing. Compression style connector is designed with internal sealing ring and knockout gasket that create raintight seal when... Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Electronic Pressure Controller handles up to 3000 psig.

Aug 29, 2016

Intended for static or low-flow applications of non-corrosive gases, EPR-3000 controls pressure within closed system or in applications with small constant flow rates and provides pilot signal for dome-loaded regulators in high-pressure applications. Design has dual proportional valve construction and does not bleed gas when at steady state pressure. While electronic control is... Read More

Fluid & Gas Flow Equipment

Polypropylene Couplings come in panel mount versions.

Aug 29, 2016

Offered with 14 panel mount options, HFC12 Series allows OEMs to integrate flexible tubing connections directly into devices or equipment. Quick disconnect couplings and panel mount inserts are available in polypropylene for chemical resistance and are gamma sterilizable. Panel mount versions offer both inline and elbow hose barb terminations as well as valved and non-valved configurations. Read More

Fluid & Gas Flow Equipment, Services

Rapid Replacement Part Service helps minimize downtime.

Aug 26, 2016

Freudenberg Xpress provides replacement parts, prototypes, and small production runs of seals and other components. Using CNC lathe machine with milling functions, company can produce complex seals that are more than 5 ft in diameter and with features such as oval cuttings, holes on seal circumference, and hexagonal and rectangular shapes. Components are made from 94 AU 30000 polyurethane, which... Read More

Fluid & Gas Flow Equipment

Waste and Overflow offers tool-less installation.

Aug 25, 2016

Slotted to provide optimal drainage, AB&A™ Classic High-Flow Waste & Overflow cover plate allows water to drain from overflow at twice the rate of most commercially available overflows. Installers can secure overflow elbow, gasket, and cover plate to tub without use of screwdriver or screws, and test kit is included in every rough-in, half, or full kit. In addition, all Classic kits include... Read More

Fluid & Gas Flow Equipment

Sanitary Vent operates as breather valve.

Aug 25, 2016

Designed to be used with VCI Model 1088 sanitary blanketing valve, Model 1100 operates at multiple set points as breather valve to avoid vacuum or over pressurization inside tank or piping system. Pressure set points range from 0.43–3.42 psi, while vacuum ranges from 0.069–0.385 psi, depending on size of unit. Offered in 2, 3, 4, and 6 in. sizes, vent comes in choice of 316 or 304 stainless... Read More

Fluid & Gas Flow Equipment

Closed Circuit Axial Piston Pumps offer infinite applicability.

Aug 25, 2016

Available in 28/32 and 38/45 cm³ frames, MP1 pumps help OEMs provide precise machine control. Modular configuration accommodates diverse applications and industries, while Danfoss Telematics Solutions offer endless connectivity and data capture possibilities. Able to scale to required control capability, including MDC (manual displacement control) and EDC (electrical displacement... Read More

Fluid & Gas Flow Equipment

Reinflex Airless Paint Hose by CRP Industrial Ideally Suited for Applying Paints, Solvents, Lacquers, Foams, Caulks, Resins, and Roof Coatings.

Aug 24, 2016

Working pressure from 1,000 to 10,000 psi; excellent flexibility and flex fatigue Cranbury, NJ - CRP Industrial, a division of CRP Industries Inc. and full line supplier of Reinflex high-pressure thermoplastic and Teflon™ hoses, offers one of the industry’s most complete line of Airless Paint Spray Hoses and accessories for use in the application of industrial coatings used in bridge... Read More

Fluid & Gas Flow Equipment, Transportation Industry Products

Maintenance Kits support Gehl and Mustang equipment.

Aug 23, 2016

Specifically designed with parts required to perform recommended routine maintenance, XPRT™ Genuine Parts Maintenance Kits are available for Gehl and Mustang skid loaders, track loaders, telescopic handlers, articulated loaders, and compact excavators. Typical filter kit includes components such as air filters, engine oil filter, fuel filters, hydraulic oil filters, transmission filters, and... Read More

Fluid & Gas Flow Equipment

Introducing Certa(TM) Sine Pumps from MasoSine

Aug 22, 2016

The brand new Certa™ line from MasoSine is the cleanest Sine pump ever. It sets a new standard for pumps in the food processing industry. Certa™ pumps meet the highest sanitary standards including 3A and EHEDG Type EL Class I. Certa™ is extremely easy to clean and fully drainable and CIPable. See the videos below and Visit our catalog in the link to find out more about this innovative new... Read More

Fluid & Gas Flow Equipment

Stainless Steel Plumbing Kits maximize air knife performance.

Aug 22, 2016

In addition to eliminating poor Stainless Steel Super Air Knife performance stemming from undersized fittings and compressed air supply lines, Stainless Steel Plumbing Kits simplify installation by providing all proper fittings and tube required for hooking up to compressed air supply. Included cut-to-length, type 316 stainless steel pipe and fittings, available in lengths from 24–108... Read More

Fluid & Gas Flow Equipment, Thermal & Heating Equipment

Superior Tube and Fine Tubes See Growing Demand from the Global Nuclear Industry

Aug 22, 2016

Superior Tube and Fine Tubes see a growing interest in their specialist tubing products from the nuclear industry around the world. The industry, which, since the Fukushima nuclear reactor incident, has experienced several difficult years with a number of projects being put on hold or some even cancelled, is currently seeing activity starting to increase again. That new optimism was evident at... Read More

Electrical Equipment & Systems, Fluid & Gas Flow Equipment, Mechanical Components and Assemblies

Stainless Steel Drain Adapter aids electrical system drainage.

Aug 19, 2016

Without requiring welding or improvised breather lines for caulking, T&B® Rigid Fittings Stainless Steel Drain Adapters provide drainage of accumulated moisture in stainless steel enclosures with non-threaded connections. UL®-approved design, suited for implementation in difficult-to-reach locations, uses FDA-approved gasket material that, along with NSF certification, supports use in... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, Waste Management & Waste Handling Equipment

Reverse Pocket Filter lengthens life of final filter.

Aug 18, 2016

Constructed to withstand extreme humidity, high velocities, and turbulence, EFS Reverse Rigid Pocket Filter is designed for use with final filters where space is limited. Filter works as both moisture coalescer and particulate filter. Free of metal parts, element eliminates risk of corrosion and punctures, while polyurethane header ensures leak-proof bonding of pockets to header. Available in G4... Read More

Fluid & Gas Flow Equipment

Round Port Eccentric Plug Valves provide MJ connections.

Aug 17, 2016

Designed in compliance with ANSI/AWWA C517-09, Model 54-4MJ Flo-E-Centric® round-port eccentric plug valves feature Mechanical Joint (MJ) connections that meet ANSI/AWWA C111/A21.11 requirements. Products are available from 6–24 in. with standard gear box with 2 in. operating nut for buried service; body, bonnet, and plug (NBR encapsulated) are constructed of ASTM A536 grade... Read More

Fluid & Gas Flow Equipment

Low-Pressure, Seal-Less Pumps have zero leakage design.

Aug 17, 2016

Respectively, Hydra-Cell Quintuplex Q155E, Q155F, and Q155H models offer max flow rates of 157, 127, and 111 gpm and max discharge pressures of 1,500, 1,850, and 2,100 psi. Multiple-diaphragm design provides virtually pulse-free, linear flow, and hydraulically-balanced diaphragms enable pump to handle high pressures with low stress and pump hot, abrasive fluids. Pumps are packing-free, can run... Read More

Fluid & Gas Flow Equipment, Mechanical Components and Assemblies

Outlet Adapter operates in aircraft rinse valve assemblies.

Aug 15, 2016

Available as FAA PMA replacement part, Outlet Adapter P/N 38000-245 is used in Rinse Valve Assemblies on vacuum toilets, galley waste disposal units, and smart toilets. Adapter has installation eligibility on Airbus Series, Airbus A380 Series, Boeing 787 Series, and Boeing 777-200 Aircraft. Read More