Fluid & Gas Flow Equipment

Electrical Equipment & Systems, Fluid & Gas Flow Equipment, HVAC, Mechanical Power Transmission, Sensors Monitors & Transducers, Test & Measuring Instruments

Standard Motor Products Releases 186 New Parts for Standard® and Intermotor®

June 6, 2016

NEW YORK - Standard Motor Products, Inc. (SMP) announces the addition of 186 new part numbers to its Standard® and Intermotor® lines. The release expands coverage through the 2016 model year covering more than 67.5 million additional VIO. SMP introduced 90 new sensors covering 23 million VIO. Highlights include 47 accelerator pedal sensors, 16 ABS speed sensors, 7 mass air flow (MAF)... Read More

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment, Health, Medical, & Dental Supplies and Equipment, HVAC, Material Handling & Storage

Air Compressors feature twin-cylinder design.

June 6, 2016

Featuring fan-cooled design with one-piece monolithic head, 2380 Series Twin WOB-L® Piston Oil-less Air Compressors provide 100 psi max pressure with open flow of 2.3 cfm. Variable output units have permanently lubricated bearings, stainless steel valves, and thin wall, hard coated aluminum cylinder. Measuring 9.31 x 5.14 x 6.73 in., compressors are designed for pressure/vacuum in medical,... Read More

Fluid & Gas Flow Equipment

Laird's Spindle Screw Pump Provides Higher Performance, Efficiency and Reliability for Liquid Cooling Systems

June 6, 2016

Compact spindle screw pump is ideally suited for liquid cooling environments that require a steady flow rate, low noise, and long operating life, such as medical imaging systems... June 1, 2016 - Global technology leader Laird (LRD: London) has developed a spindle screw pump that delivers consistent and reliable performance in liquid cooling systems (LCS). Compared to centrifugal pumps,... Read More

Adhesives & Sealants, Fluid & Gas Flow Equipment, Materials & Material Processing

Electrolube Filled Thermal Pastes: Reliably Applied Using VisctoTec Dosing Pumps

June 6, 2016

Electrolube  manufactures electro-chemical products for the electronics industry. These include thermal management products, compounds, coatings, lubricants and cleaning agents. With its expansive product range of formulated chemical products, Electrolube supplies manufacturers of electronic, industrial and domestic devices for a variety of industries, thus offering the ‘complete solution’... Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products, Packaging Products & Equipment

Connectors and Plugs serve commercial and municipal applications.

June 3, 2016

Used with Viega PEX Press system, PEX Press test plugs (3/8–1 in., 1 ¼ in., and 1 ½ in.) have Smart Connect® feature. Also made of Radel R, 45° polymer PEX press elbows come in 1 ½ x 1 ½ in. and 2 x 2 in. sizes. PEX Press bronze, 90° flare elbows (¾ and 1 in.) and PEX Press reducing tees (1 ½ x 1 ½ x ¾ in., 1 ½ x 1 ¼ x 1 in., and 1 ½ x 1... Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools, Packaging Products & Equipment

Coolant Fill System features portable design.

June 3, 2016

Designed for filling machine cells with fresh coolant, Mobile Coolant Fill System eliminates need to fill buckets and carry them to machine sumps, potentially spilling coolant and creating slip hazard. System includes roto-molded 15- or 25-gallon coolant concentrate tank, onboard proportioner, garden hose water connection swivel, No-Flat tires, and EZ fill gas nozzle style valve with fill hose.... Read More

Fluid & Gas Flow Equipment

Abrasive Cosmetics Filled Reliably

June 3, 2016

Hand wash pastes dosed wear-free using ViscoTec filling pumps Hand wash pastes containing abrasive friction and lubrication gel materials are used in most trades and industries. These pastes remove stubborn dirt, such as oil, grease or glue residue from the hands. The lubricating gel and friction particles in the pastes mechanically remove the dirt and it is these substances which are considered... Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Riser Manifold features max working pressure of 300 psi.

June 3, 2016

Installed in horizontal or vertical orientation, for both single sprinkler rises and floor control in high-rises, Model RM-1 provides proprietary connection between manifold and Potter alarm switch. Connection has watertight, flat surface design which helps prevent leaks. Manifold also includes pressure gauge, alarm test orifice, drain, and sight glass housed in single assembly for use in NFPA 13... Read More

Electronic Components & Devices, Fluid & Gas Flow Equipment, Mechanical Power Transmission

Automotive Aftermarket Parts include pumps, belts, and more.

June 1, 2016

Original Equipment (OE) quality automotive products include 255 new part numbers, which cover 6 heavy-duty water pumps for diesel truck applications, 300-psi working pressure Fiber Braid Lock-On Hose (5LOC) in 300 ft bulk reel and 50 ft packaging, and Variable Valve Timing Solenoids. Expanded SKUs also include RPM (Race, Performance, Muscle) Micro-V® belts, which utilize multiple... Read More

Fluid & Gas Flow Equipment

Custom Riser Assemblies can be made to suit any application.

June 1, 2016

Able to be fully customized to end-user application requirements, K-Series Custom Riser Assemblies feature bent PVC pipes and quick disconnect components that allow users with washing systems to click, snap, and spray. SCH 40 and SCH 80 PVC pipe sizes are available from 1–2 in. Systems support snap-on and threaded nozzles as well as saddles, cam locks, and quick disconnect fittings. Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Gas Regulators are designed for visual clarity.

May 31, 2016

G150 (light-duty regulator), GT350 (2-stage, heavy-duty regulator), and GRF400 (light-duty, flow meter/regulator) feature alloy bonnet for maximum strength, ergonomic knob shape that facilitates setting of pressure, and color-coding that aids gas identification. Available for acetylene, oxygen, LP, and inert gas, products offer color combination on gauge face for clarity in reading... Read More

Fluid & Gas Flow Equipment

Pre-Insulated Piping System efficiently handles chilled media.

May 31, 2016

Consisting of polyethylene (PE) inner layer, polyurethane insulation core, and PE outer layer, COOLSAFE™ comes in 1–10 in. sizes and provides thermal conductivity >0.015 Btu-ft/h-ft2-F. Components are molded and insulated to strict tolerances to facilitate installation and ensure long-term insulation of chilled media. Installed using butt or electrofusion welding methods, system can... Read More

Fluid & Gas Flow Equipment, Health, Medical, & Dental Supplies and Equipment, Material Handling & Storage

EndoChoice® Announces FDA Clearance of its Orca(TM) Sterile, Single-Use Air/Water and Suction Valves

May 25, 2016

New Sterile, Single-Use Valves to be Presented at DDW® 2016 and the SGNA 43rd Annual Course ALPHARETTA, Ga. - EndoChoice Holdings, Inc. (NYSE: GI) announced it received 510(k) clearance for its new Orca™ sterile, single-use air/water and suction valves for Olympus® 160, 180 and 190 Series flexible endoscopes.  Recently published clinical guidelines from Association for the Advancement... Read More

Fluid & Gas Flow Equipment

Media Separation Valves handle aggressive liquids and gases.

May 24, 2016

Featuring 2-port design, 300 and 350 Series iDP Valves are constructed of material suitable for bodily fluids, aggressive chemicals and cleaners, and elevated liquid temperatures. Flexing diaphragm-poppet isolates media from solenoid, within inert body material, ensuring long life and sustained performance. Typical markets and applications include: clinical diagnostics, analytical chemistry,... Read More

Fluid & Gas Flow Equipment, Materials & Material Processing, Mounting & Attaching Products

FKM Seals Best for Harsh Environments

May 24, 2016

ROCHESTER, NY — Fluorocarbon elastomers (FKMs) provide significantly more effective sealing protection in extreme environments than nearly any other material, with excellent resistance to temperature, chemicals, fuels, ozone and weather.  Web Seal offers engineered gaskets, O-rings and molded shapes from a wide range of fluorocarbon materials such as DuPont’s™ Viton®, and an array of... Read More

Fluid & Gas Flow Equipment, HVAC

Heat Pump with Smart Controls reduces installation time.

May 23, 2016

With its exact-fit replacement design, Coleman® Peak™ packaged heat pump matches footprints of other manufacturers' units and reduces installation time and effort by eliminating need for curb adapter. Simplicity Smart Equipment (SE) Controls facilitate system setup, optimization, and monitoring, also offers optional Mobile Access Portal (MAP) Gateway provides access to SE control system... Read More

Fluid & Gas Flow Equipment

Hydraulic Hose features abrasion-resistant cover.

May 23, 2016

Available in ¼–½ in. ID sizes, 563TJ TOUGHJacket™ Hose is designed to withstand strains of large-scale, heavy-duty applications. Hose is rated for constant working pressure of 3,000 psi and temperature range of -40 to 250°F. With very low length change under pressure, hose is suited for boom or cable track applications where long lengths are required. Designed to meet SAE 10017R... Read More

Fluid & Gas Flow Equipment, Health, Medical, & Dental Supplies and Equipment

Media Isolation Valves feature PTFE wetted areas.

May 20, 2016

Using flexible diaphragm to isolate actuation mechanism from fluid path, solenoid-operated NIV Series is suited for applications that require precise, repeatable dispensing of media. One-piece valve stem functions as sealing membrane while supporting and centralizing poppet in seating area. Available in 4 orifice sizes with pressures to 30 psig, valves come in 2-way NC, 2-way NO, or 3-way... Read More

Fluid & Gas Flow Equipment, Mounting & Attaching Products

Basalt Tadpole Seals help increase product strength, safety.

May 19, 2016

Made from melted basalt rock without any additives, tadpole seals feature 100% recyclable, basalt woven fiber to offer environmentally friendly alternative to fiberglass materials. Properties include 2,500–3,000 mpa tensile strength; acid/alkali, abrasion, and chemical resistance; and thermal conductivity of 1.44–1.46 W/m-k. With 2,642°F melting point, this non-hazardous,... Read More

Fluid & Gas Flow Equipment, Green & Clean

Refrigerated Dryers feature microprocessor-based control.

May 19, 2016

Comprising 325, 410, and 470 cfm sizes, Secotec TE Series features Secopack LS thermal storage system, which contains phase-changing material. Thermal energy is stored as PCM cycles from solid to liquid state, maintaining stable outlet dew point for optimized moisture control. Internal design makes it possible to reduce pressure loss across dryer to 1.8 psi. Designed to control thermal storage... Read More