Schwarzer Precision    45276 Essen   Germany
Mar 27, 2007 Offering variety of fixing and connecting possibilities, SP 3600 LI measures 56 x 120 x 128 mm and incorporates vibration damping suspension. Various configurations, such as pressure or vacuum pumps, are possible, and standard version is delivered for 230 V/50 Hz, 120 V/60 Hz, 12 Vdc operation. With max pressure of 300 mbar and flow rate of 16 lpm, pump is suited for applications such as air beds, anti-bedsore mattresses, and compression therapy.

Richco, Inc.    Morton Grove, IL 60680
Mar 27, 2007 Designed to plug and seal holes, LTP Series installs with finger pressure and is available in 3 standard sizes. Liquid tight plugs are made of UL 94V0-rated SBR material and comply with RoHS standards.

Precision Engine Controls Corp.    San Diego, CA 92121
Mar 27, 2007 Suited for turbines up to 10 MW and reciprocating engines up to 13,000 hp, eXVG Gas Fuel Metering Valve features single direct-acting solenoid actuator with no mechanical linkages and one moving part. Optional 4-20 mA interface allows complete closed-loop fuel control, while onboard 24 Vdc electronics provide health and data monitoring via isolated RS-232 serial interface. With contamination-resistant, self-cleaning flow-through design, valve provides positive shut-off.

Goodyear Tire & Rubber Company, The    Akron, OH 44316
Mar 26, 2007 Available with inside diameters from 1/8-¾ in., SAE 30R9 and 30R11 are designed for moderate-pressure applications and help resist swelling, chemical degradation, and oil and fuel permeation. Outer hose covers also help resist decay from oil, heat, and ozone. Featuring aramid fiber to resist stretching, hoses are compatible with variety of fuels, including gasoline, diesel, and ethanol. In addition, SAE 30R9 can be used for sour gas and environmentally friendly biodiesel fuel.

Diba Industries    Danbury, CT 06810
Mar 22, 2007 Featuring ¼-28 threads, Click-N-Seal(TM) reusable fittings provide objective feedback that required torque for proper seal has been achieved. Installer can feel and hear click that indicates fitting is properly seated, and fitting physically prevents any tightening beyond that point. When paired with Flared Tubing Assemblies, fittings produce continuous, fully swept fluoropolymer fluid path with consistent internal tubing diameter in sample, reagent, wash, and waste lines.

MP Pumps Inc./Tecumseh Products Co.    Fraser, MI 48026 1686
Mar 22, 2007 Comprised of 6 models in 5 sizes from ½-1¼ in. NPT intake, FRX Series is supplied with AC and DC motors (FRX 50 and FRX 75) and AC 56J frame (FRX 100 and FRX 125). AC motors range from ½-1½ hp, while DC motors are offered in 12 and 24 V. Able to be driven by electric motors, engines, or hydraulic motors, centrifugal pumps feature all cast 316 stainless steel construction. Polyphenylene sulfide (PPS) is available for ½ in. size.

Parker Hannifin Corp., Partek Operation    Tuscon, AZ 85706
Mar 21, 2007 Compliant with SEMI-F57-0301 standard, 20 Series features one-piece diaphragm, and body machined from virgin 100% ultra-high purity PTFE for chemical resistance. Available in manual and pneumatically actuated configurations, valves offer orifice sizes of ¼, ½, and 1 in. with Cv figures of 0.76, 3.9, and 13.5, respectively. Angled and rounded flow path, plus open and swept bowl shape around diaphragm, minimize turbulence and eliminate sharp angles that cause fluid shear.

Spartan Scientific Inc.    Boardman, OH 44512
Mar 20, 2007 Model CRDV/S combines electronic sensor with solid-state integrated logic analysis circuit to determine exact amount of time necessary to empty condensate from pneumatic system. Unit allows only necessary amount of compressed air needed to purge excess fluid, minimizing compressor cycling and wear and tear on components. Housed in environment-resistant package, valve includes indicator lights for power and purge cycle.

Assured Automation    Clark, NJ 07066
Mar 20, 2007 Offered in full- or standard-port models, 4000 Series comes with carbon steel or stainless steel body, and 316 SS ball and stem. Units feature ISO 5211 direct mounting with adjustable packing, and can be equipped with manual handle or direct mount pneumatic or electric actuator. Fire-tested to API607 4th Edition and ISO 10497, valves meet stringent requirements of refinery, petrochemical, chemical process, process control, water and waste, and pipeline applications.

Anver Corp. - Anver.Com    Hudson, MA 01749
Mar 19, 2007 Anver Portable Vacuum Station features VPE-48 Electric Vac-Pack(TM); dry, oil-free vacuum pump; and reservoir integrated and mounted on steel cart with heavy-duty wheels and casters and push handle. Equipped with 1.5, 3, or 5 hp motor, this self-contained, heavy-duty, portable vacuum station will, respectively, pull 24 in. Hg vacuum with 24, 50, or 75 scfm. Energy saver circuitry, also included, performs automatic pump shut-off when proper vacuum is achieved.

CAT PUMPS    Minneapolis, MN 55449
Mar 19, 2007 Also suited for chemical injection, Model 6762 Triplex Reciprocating Positive Displacement Plunger Pump features Duplex SS head and valve assemblies. Pump includes concentric, solid ceramic plunger, corrosion-resistant liquid end, and heavy-duty drive end. Operating at up to 50 hp, it handles up to 60 gpm with speed up to 520 rpm, and pressure up to 1,200 psi.

Dynisco Instruments    Franklin, MA 02038
Mar 16, 2007 Designed to provide emergency relief of excess pressure build-up, Rupture Disks are available for burst pressures from 1,500-15,000 psi. Intrinsically safe units provide accuracy of ±5% and feature standard melt temperature of 750°F. Choice of process connections includes ½-20 UNF mounting thread with lengths of 1.81, 3, 6, 9, and 12 in.; ½-20 UNF mounting thread with ¼ in. NPT fitting; M18 x 1.5 mounting thread; 5/8-11 NC mounting thread, and ¾-16 UNF mounting thread.

Sloan Valve Co.    Franklin Park, IL 60131
Mar 15, 2007 Flush-valve cartridge requires less than 1.5 lb of actuation force to flush, minimizing handle kickback and promoting assembly life. Equipped with high-contrast, black actuator cap, assembly minimizes overall operational noise with its fluid actuation. Solution has passed testing processes that include component durability, accelerated life cycle, abusive chemicals, and variant water pressure.

Sealant Equipment & Engineering, Inc.    Plymouth, MI 48170-0965
Mar 15, 2007 Designed with two 3/8 in. NPT and two ¾ in. NPT inlet ports, Automatic Snuf-Bak(TM) Model 2200-033-011 provides fast shut-off of viscous materials such as polyurethanes, epoxies, silicones, greases, and various cohesive and thixotropic adhesives and sealants. Pneumatically actuated valve opens and closes material passage in base of nozzle adapter to start and stop material flow. Needle pulls backward during shut-off, breaking flow of material to prevent stringing.

Sloan Valve Company    Franklin Park, IL 60131
Mar 14, 2007 Designed to conserve water while maintaining consistent spray, AC-11 Series Act-O-Matic® showerheads feature self-cleaning action that eliminates clogging particles, such as sand, after each use. Cone-within-a-cone spray uses pressure-compensating flow control for full flow at low pressures. Suited for commercial applications such as hotel rooms, health club locker rooms, and multi- and single- family residences, all models come with fingertip water volume control.

Parker Hannifin Corp    Greenfield, TN 38230
Mar 14, 2007 Single Head T2-06 compact diaphragm pump weighs 190 g, measures 81 x 30 x 50 mm and delivers 6 Lpm free flow. It offers pressure up to 19 psig and vacuum to 17 in. Hg. T206 Twin Head weighs 208 g, measures 89 x 30 x 66 mm and is available with PMDC motor or optional BLDC motor. Twin Head delivers up to 12 Lpm free flow and offers pressure up to 19 psig and vacuum to 17 in Hg.

Parker Hannifin Corp    Greenfield, TN 38230
Mar 14, 2007 Combining closed-loop pressure control and decision logic, Microfluidic Process Controller (MPC(TM)) electronic pressure control module offers pressure ranges up to 100 psig. Unit provides up to 3 channels of pressure control (proportional and/or digital) that are continuously monitored with programmable logic, allowing entire pressure control applications to be handled with single device. It accepts 3 channels of external feedback, digital I/O, and different output monitor signal.

Saint Gobain Performance Plastics    Garden Grove, CA 92841
Mar 13, 2007 Furon® UPM 1000 High Temperature Valve is engineered to operate in extreme conditions with media temperatures up to 302°F. Wetted surfaces are constructed of high-purity perfluoroalkoxy and modified PTFE, and Nippon Pillar S300 or Furon® Fuse Bond end connections are available for leak-free connection to system. Featuring ½ in. orifice, vale is offered in 2- and 3-way configurations with pneumatic actuation.

Parker Hannifin Corp.    Oxford, MI 48371
Mar 13, 2007 Measuring 15 x 15 x 45 mm, HFProf offers flows up to 45 lpm and comes in 3 standard control voltages of 0-5, 0-12, and -24 Vdc. Unit consumes less than 3 W while continuously regulating full flow at max ambient temperatures of 50°C. Available in both 5 mm ID barbed and face seal manifold bodies, valve includes wire-leaded electrical termination, FKM elastomer, and 35 million lifecycle rating.

Viking Pump Inc., A Unit Of IDEX Corp.    Cedar Falls, IA 50613 0008
Mar 12, 2007 Customizable per user specifications, Series RTP20 features tri-lobe design with removable feet and multiple mountings for vertical or horizontal adaptation. Units are available with ACME threaded or tri-clamp ports as well as other port connections. Long sealing land at rotor tips enables efficient operation when working with low viscosity products. With capacity of 264 gpm, pumps operate in temperatures to 230°F, pressures to 145 psi, and viscosity to 250,000 SSU.