Supercritical Fluid Technologies, Inc.    Newark, DE 19711
Jul 31, 2008 Able to pressurize carbon dioxide up to 10,000 psi at flow rates from 0.01-24.0 ml/min, self-contained SFT-10 utilizes dual sapphire syringe pump technology and can perform in standard constant pressure mode as well as optional constant flow mode. Peltier (thermoelectric) technology makes it possible to achieve high pressure without external cooling bath; chiller maintains temperature at pump heads low enough to ensure CO2 remains liquid.

Bosch Rexroth Corp., Industrial Hydraulics Div.    Bethlehem, PA 18017
Jul 31, 2008 Electrohydraulic Flow Matching (EFM) control generates adjusting signals for pump at same time valves are controlled, ensuring adequate flow is made available. Promoting accelerated response to implement hydraulics, solution is operated in open control chain as electro-proportional variable pump. Pressure losses between pump and valve adjust themselves according to operating point.

Maxpro Technologies    Fairview, PA 16415
Jul 30, 2008 Tubing is available that has undergone autofrettage process, which subjects internal bore to pressure high enough to plastically deform it. This results in putting inner wall into compression, providing residual compressive stress once pressure is released. Use of this technique helps extend tube fatigue life.

Midland-ACS    West Midlands   United Kingdom
Jul 30, 2008 Made of 316 stainless steel to offer internal and external protection from liquid and gases, 70 Series is suited for hazardous areas in oil, gas, and petrochemical industries. Direct-acting 3/2 valve is available with connections from ¼-½ NPT and is EExd IIC T6 with IP67 classified. Available in 12, 24, 110 Vdc as well as 24, 110, and 230 Vac options, valve removes potential for leaks and minimizes risk of hazardous contamination.

Lee Company, The    Westbrook, CT 06498 0424
Jul 28, 2008 Designed specifically for optimal performance in harsh duty applications, Model 440C Lo-Lohm Chek® check valve is constructed entirely of corrosion-resistant stainless steel. It features durable 440C poppet and seat that provides resistance to damage from contamination. Available in forward and reverse flow directions, space saving unit offers high flow capability. Custom valves using MP35N can also be designed for severely corrosive environments.

NLB Corporation    Wixom, MI 48393 2824
Jul 28, 2008 Able to clear blocked pipes of up to 12 in. dia in single pass, RPN2420 has 5 high-cohesive, sapphire nozzles positioned for peak efficiency, 1 in front and 4 on sides. Rotation is variable from 50-500 rpm with full speed control, and nozzle operates at pressures up to 20,000 psi with flow up to 20 gpm. Featuring precision machined stainless steel body, 3 lb self-propelling, field-repairable nozzle clears blockages horizontally, vertically, and in tight elbows.

Hayward Industrial Products Inc., Hayward Flow Control Systems    Clemmons, NC 27012
Jul 28, 2008 Corrosion resistant Hayward pneumatic actuators come in various air-to-air (double acting) and air-to-spring (fail-safe) ¼ turn spring return models with 2 and 4 piston rack and piston or vane designs, depending upon model. They incorporate manual override, position indicator, and permanent lubrication. Options such as solenoid valves with different voltages, limit switches, cycle speed controls, position transmitter, and positioners are also available.

Lee Company, The    Westbrook, CT 06498 0424
Jul 25, 2008 Micro-Dispense Nozzles provide method of controlling dispensed volumes when used in conjunction with Lee VHS (Very High Speed) Micro-Dispense Valves. Designed for applications where volume of liquid to be dispensed is in microliter to nanoliter range, units are available in 062 MINSTAC threaded ends and straight tube mounting configurations for system design flexibility.

Viking Pump Inc., A Unit Of IDEX Corp.    Cedar Falls, IA 50613 0008
Jul 25, 2008 Providing 200 psi thin liquid capability at capacities up to 160 gpm, LVP Series is designed for corrosive liquids at high pressures. Pumps feature stainless steel casing surface-hardened to 62 Rockwell C, chrome oxide-coated shaft, silicon carbide bushings, and PEEK® vanes. Units are available in metric-standard design, with DIN flanges, IEC motor mount, and metric-standard shaft seal options, as well as with ANSI flange ports, NEMA motor mount, and inch-standard seals.

EXAIR Corporation    Cincinnati, OH 45249-1621
Jul 22, 2008 Powered by compressed air, E-Vac series is comprised of low-vacuum units up to 21 in. Hg for porous materials and high-vacuum units up to 27 in. Hg for non-porous materials. Vacuum pumps are available in various sizes and flows, and selection of suction cups is available for range of applications. Engineered to minimize air consumption and increase cycle speeds, series has in-line, single stage design that delivers consistent, steady vacuum without fluctuations.

Binks ITW Industrial Finishing    Glendale Heights, IL 60139
Jul 18, 2008 Suited for small and medium wood shops, Binks Comet 4/12(TM) pump is designed with air powered 12:1 two-ball piston pump that is capable of producing 0.4 gpm at 60 cycles/min. Created to apply water-borne and solvent-borne coatings, it can spray wood coatings at fluid outlet pressures from 300-1,200 psi. Available in wall-mount, cart-mount, or tripod-mount outfits, pump features balanced fluid section for steady, even coating flow and hard chrome coated SS pump rod.

Elma Electronic Inc.    Fremont, CA 94538
Jul 18, 2008 Designed for empty slots in MicroTCA chassis, AMC Air Baffle/Filler Boards come in both full and mid sizes and in single module format. AMC air baffle can be plugged into unused slots in MicroTCA chassis to redirect or contain airflow, which helps keep cool air within critical parts of enclosure. Cards also act as filler board, preventing open slots and helping to protect chassis from outside elements such as dust.

Qosina Corp.    Edgewood, NY 11717 8329
Jul 18, 2008 Hemostasis valves function as seal by preventing air and fluid leakage around wires and instruments. Able to click into open and semi-open positions and lock with thumb lever, one-handed hemostasis valve (Part #33057) has 2 channels. Straight primary channel has silicone gasket, while angled secondary channel can be used for pressure monitoring and flushing. Self-sealing hemostasis valve (Part #33058) is high pressure and luer activated, and can connect to standard catheters.

Thomas Products Division    Sheboygan, WI 53081
Jul 17, 2008 Rated for max flow of 2.37 cfm, Series 660/680 WOB-L® pumps incorporate wetted aluminum parts treated for corrosion protection and single-phase AC motors of permanent split capacitor design. Oil-less pistons and cylinders, in addition to intake filters, ensure non-contaminated air flow, while SS valves, piston seals, hard-coated aluminum cylinders, and permanently lubricated bearings help extend product life. Pumps provide up to 28.5 in. Hg vacuum or 45 psi pressure.

Viking Pump Inc., A Unit Of IDEX Corp.    Cedar Falls, IA 50613 0008
Jul 17, 2008 Dimensionally interchangeable with Viking Heavy Duty Bracketed packed and sealed pumps, Universal Mag Drive Series facilitates upgrade process. Sealless offering features thrust-controlled design, allowing short-term run-dry capabilities and bi-directional pump operation for application flexibility. Offered in cast iron, steel, and stainless steel, products are suited for use with hazardous, hard-to-seal liquids and offer flow rates to 200 gpm with pressures to 200 psi.

Simrit, A Div. Of Freudenberg-NOK    Plymouth, MI 48170
Jul 15, 2008 With service temperature of -6 to 300°C, Simriz® 508 exhibits plasma resistance and minimum particulation in range of plasma environments. White perfluoroelastomer material is designed for thermal stability and nearly universal protection against chemical attack. Suited for deposition, oxide, and metal plasma etching, ashing, metallization, and ion implant, product is appropriate for chamber lid seals, bell jar seals, endpoint windows, gas inlet seals, and isolator valve seals.

NIBCO, Inc.    Elkhart, IN 46516
Jul 14, 2008 Featuring nylon-coated finish and EPDM-encapsulated disc for good closure during shut downs, GD6765-8N grooved butterfly valve is gear-operated for slow-close functionality to protect piping from water shock. It is UL-/ULC-listed to 350 psi water working pressure and UL-listed for indoor/outdoor use. Additionally, F697-0 Class 250 iron body gate valve is rated to 300 psi and carries FM/NYC MEA approvals. Grooved double door silent check valve, KG900-W 350, is also available.

Valcor Engineering Scientific Div.    Springfield, NJ 07081
Jul 11, 2008 Designed to handle liquid carbon dioxide, SV91 Series features all-welded, leak-tight stainless steel construction with straight-thru flow path. Direct-acting shear seal design ensures positive shifting and sealing. Available in 2 versions rated at 350 and 1,000 psi, solenoid valve is suited for use in fog producing systems, food processing, chillers, and other temperature control devices.

Watson-Marlow Bredel Pumps    Wilmington, MA 01887
Jul 11, 2008 Suited for harsh processing applications, Model 520RE high-pressure chemical metering peristaltic pump offers flows of 55 gph at 30 psi to 7 gph at 100 psi. It covers range of applications including low shear feed for contamination-free transfer of acids, bases, and slurries found in chemical-based industries. With repeatability at 99.5%, self-priming pump can accommodate flow rates from 0.1 µL to 350 gpm, and can withstand pressures up to 232 psi.

Ross Controls    Troy, MI 48083
Jul 09, 2008 Available with ¼ and 3/8 in. ports, manual L-O-X® Valves control airflow and are designed to meet OSHA regulations, ANSI standards, European regulation EN 1037, and Canadian Standard CSA Z460. When handle is pulled outward, air moves freely. Short inward push of handle shuts off airflow and opens exhaust port to release downstream air. Equipped with Teflon® seals, valves offer indicator port option for test point verification of absence of energy downstream.