Meissner Filtration Products, Inc.    Camarillo, CA 93012 8760
Jan 23, 2009 Available in lengths of 2.5 in. or 5 in., pleated SFE Small Flow Element filter cartridges are designed for point-of-use filtration and small batch processing of liquids and gases, where flow requirements are less than 3 gpm or 60 scfm. Wide range of media is available, with filtration ratings from 0.04 to 99 µm, including prefilters in glass and polypropylene microfiber, and membranes in PES, PVDF, polypropylene and PTFE.

Bosch Rexroth Corp., Industrial Hydraulics Div.    Bethlehem, PA 18017
Jan 23, 2009 Heavy duty flow control valves add auxiliary hydraulic power to work tools and attachments to maximize machine utility without modifying machine's directional control valve. Zinc-plated steel bodies and IP69 rated coils enable use in severe operating conditions. Three-way configuration: 1 inlet and 2 outlet ports for priority and by-pass flow, allowing for simultaneous operation, independent of working pressures, of both hydraulic actuator and normal functions of machine.

Bradley Corp.    Menomonee Falls, WI 53051
Jan 22, 2009 Available in standard, high-low, and emergency models, Navigator® Valves are made with lead-free brass as main raw material, complete with lead-free brass castings and bar stock, and stainless steel. Units are designed to blend incoming hot and cold water to regulate water temperature within set point and prevent water temperature extremes such as hot-water scalding.

Rain For Rent    Bakersfield, CA 93303
Jan 21, 2009 With flow rate up to 10,000 gpm, 12 in. DV300c Power Prime(TM) Pump produces total dynamic head up to 170 ft and handles 3 in. solids with semi-enclosed impeller. Unit operates at 80% efficiency and is designed specifically for high-flow applications, including bypass jobs. When combined with HDPE pipe and tanks, pump offers complete system to meet liquid handling needs.

Martin Engineering    Neponset, IL 61345 9766
Jan 21, 2009 MARTIN® Removable Air Cannon Discharge Nozzle eliminates need to dismount air cannon from outside of vessel to change nozzle from inside, minimizing downtime. Device consists of outer collar, permanently mounted on outside of vessel, to which replaceable inner fan nozzle mates. Interlocking system allows nozzle to be positively positioned so air cannon discharge is properly directed.

Bee Valve Inc.    Elyria, OH 44035
Jan 21, 2009 Guide-rib system features guide locks manufactured of glass-reinforced nylon for maximum strength/chemical resistance and to eliminate cross-threading. Locks consist of male adapter with spray nozzle threaded opening, available in 4 sizes, while cam lever, female guide lock coupler is offered in 2 sizes. EPDM gaskets, coupler handles, and handle locking pins are also incorporated. System is available in self-aligning single- and double-rib designs.

Clark Solutions    Hudson, MA 01749
Jan 19, 2009 Designed for pressure or vacuum applications with low current requirements, Boxer 5100 and 5200 are intended for use with compatible liquids and gases, chemical dosing, sampling gases or liquids, or other applications in environmental, medical, or chemical processing. Dual head pumps can be configured for serial or parallel operation with combined flow to 10 Lpm (gas) or to 900 mLpm liquids. Self-priming pumps are available with clip mounting and choice of DC motors.

Tridak    Torrington, CT 06790
Jan 16, 2009 Leveraging adjustable and lockable suck-back control, model 775 spool dispensing valve ensures consistent, string-less dispensing of tackier materials while also preventing droplets from remaining on dispense nozzle when using low-viscosity materials. Adjustable and lockable flow control, also included, enables complete control over amount of material dispensed (down to 0.01 ml). Suited for use with various materials, valve can be modified to meet specific requirements.

ITT Flojet    Foothill Ranch, CA 92610
Jan 15, 2009 Engineered for applications such as chemical transfer, parts washers, ink transfers, and car wash systems, G57C features Kalrez® diaphragm and check valves that incorporate O-rings made from Viton® Extreme(TM) fluoroelastomer. Air operated, industrial pump, with double diaphragm design, can supply up to 5.0 gpm. Kalrez perfluoroelastomer provides chemical resistance in all types of acids, hydrocarbons, amine inhibitors, glycols, and methanol.

Precision Filtration Products    Pennsburg, PA 18073
Jan 13, 2009 Mounted atop 55 gal drum, Drum Top Filter Unit can be used for filtering new fluids during transfer and replenishment as well as those currently in service. It is suited for working with high-viscosity lubrication and hydraulic oils, offering 2-stage filtration that removes particulate and water contamination. Product is constructed with lightweight tubular aluminum, all-welded frame and offers sampling ports on inlet and outlet connections to provide ISO Code comparisons.

Leonard Valve Co.    Cranston, RI 02910
Jan 12, 2009 Showermaster® 7600 Thermostatic Mixing Valves compensate for supply temperature and pressure fluctuations in commercial/institutional applications. Designed to ASSE Standard 1016 Type T and P and CSA Standard B125, valves include copper encapsulated thermostat, built-in shutoff, and integrated checkstops on hot and cold inlets. Units are manufactured with bronze, brass, and SS. Options include SANIGUARD® coating on handle, vandal-resistant screws, and strainers.

James Walker Group Ltd    Houston, TX 77060
Jan 07, 2009 Made from Elast-O-Pure® EPDM synthetic rubber, Replacement Dome Seals are rated to USP 30 Class VI classification and formulated for use in pharmaceutical and bioprocessing environments. Compressed air operated valves use inflatable sealing mechanism, which provides pressure-tight seal against dome when in closed position. Available in standard diameters from 50-400 mm, dome seals are suited for controlling flow of bulk materials such as powders, pastes, and granules.

American Casting & Manufacturing Corp.    Plainview, NY 11803
Jan 07, 2009 Offering break strength up to 135 lb, heavy-duty plastic security locks and seal straps, Models 4001 and HS 75, are available in standard, custom, fluorescent, and neon colors. Units offer up to 17 spaces for printing with consecutive numbers up to 7 digits. Seals are used by trucking, air freight, and shipping industries for tanks, containers, totes, and all high-security shipment applications.

NewAge Industries Inc.    Southampton, PA 18966
Jan 06, 2009 Thermobarb® fittings in nylon, polyethylene, PVDF, and polypropylene are compact in design and feature multiple barbes for secure connections. They are offered in sizes from 1/8-1 in. tubing ID, with hose nipples from ½-4 in. tubing ID. Designed for soft-walled tubing, chemically resistant units offer high impact strength and are available in various styles. Single-use version is manufactured from FDA-approved polypropylene and is sterilizable by autoclave or gamma radiation.

Flexaust Co., Inc., The    Warsaw, IN 46581
Jan 06, 2009 Available for wire-reinforced, wire stretch, and all-plastic vacuum hoses from 1-2 in. I.D., Flexaust Overmolded Cuffs can be molded from TPV, PVC, polypropylene, polyurethane, and other materials. Cuffs are injection molded over hose to insure system integrity, prevent contamination, and create hermetic seal for optimum air, liquid, and dust flow. Products are designed to customer specification in straight, angled, reduced, enlarged, and squeezable configurations.

Colder Products Co.    St. Paul, MN 55114
Jan 06, 2009 When integrated into pre-sterilized single-use systems, HFC39 Series uses automatic shutoff valves to prevent external organisms from entering through connector and into flow path during disconnection. Plastic components are made from polysulfone, and seals are platinum-cured silicone, which withstands autoclave, EtO, Gamma, or E-beam sterilization. Available with hose barbs for ¼, 3/8, and ½ in. tubing, couplings operate from vacuum to 125 psi and -40 to 280°F.

Schroeder Industries LLC    Leetsdale, PA 15056-1025
Jan 06, 2009 Available in 6 and 9 in. sizes, Excellement® Z Media Elements are designed for GH HYDRASPIN filters used with hydrostatic systems. Units are tested under cyclic flow conditions to verify flow fatigue characteristics. For strength and rigidity, elements feature epoxy-coated steel wire fabric and support layers. Wide range of Z media elements enable user to achieve desired cleanliness level for system.

ITT Interconnect Solutions    Santa Ana, CA 92705
Jan 05, 2009 Pressure rated up to 5 psi, MIKQ IP68 Series of high density connectors are designed for use in tactical communication and control systems, imaging systems, and television camera equipment. They feature contact system that adheres to unique sealant material while maintaining 0.050 contact spacing. Housed in brass metal shell, 37-pin connectors have twist pin contact system with standard crimp contact wire terminations, crimped gold plated contacts, and push-pull coupling mechanism.

seepex, Inc.    Enon, OH 45323
Jan 05, 2009 Wobble stator pump includes stator with elastic properties that maximize volumetric efficiencies and longevity by minimizing slip and friction at high pressures. Rotating unit features block design that directly couples pump with choice of 4 or 6-pole 3-phase motors, integrated vector-type variable speed gear motors, or mechanical variable speed drives. Device also features single universal joint for exchange of conveying elements.

Cole-Parmer Instrument Co.    Vernon Hills, IL 60061
Jan 02, 2009 Featuring cast-aluminum housing, MASTERFLEX® B/T® process tubing pumps enable bulk transfer of viscous and shear-sensitive fluids. Pump head door opens fully to facilitate tubing inspection/change-out, and optimal occlusion is automatic when door is closed and latched. Secure retention mechanism, which grips tubing for trouble-free loading, also prevents tubing creep/roll. With PerfectPosition(TM) pump tubing in B/T 87 and B/T 91, pumps handle flow rates from 0.67-37 Lpm.