Parker Hannifin Corp.    Oxford, MI 48371
Apr 30, 2009 Axial piston pumps of 45cc/rev P1/PD Series are optimized for medium-pressure open-circuit mobile (P1) and industrial (PD) applications. Available with optional torque limiter or as full power through-drive version, series is rated for continuous operation at pressures to 280 bar. Operating efficiency lowers electricity demands, while noise output level can reduce or eliminate need for insulation and help comply with OSHA hearing conservation standards.

Parker/Texloc Div. of Parflex    Fort Worth, TX 76106
Apr 30, 2009 Stainless Steel Braided Convoluted Hose Assemblies are manufactured in sizes from ¼-4 in. ID depending on style and operate in temperatures up to 500ºF. SCW hose is standard wall PTFE convoluted assembly, where as SCWV is heavy wall PTFE, open pitch style for kink resistance and reduced permeation. Heavier wall convoluted tubing can handle vacuum applications at elevated temperatures.

KNF Neuberger, Inc.    Trenton, NJ 08691-1810
Apr 30, 2009 Designed to transfer, evacuate, or compress air or gases for analytical, medical, and all portable instruments, KNF NMS020 micropump can deliver high-performance flow rates up to 1.8 Lpm, vacuum up to 15 in. Hg, and pressure up to 7.5 psig. It features diaphragm for ensuring pumped medium remains pure and contaminant-free and corrosion-resistant wetted parts to withstand harsh conditions. Customizable pump is powered by brush or brushless DC motors.

Casella USA    Amherst, NH 03031
Apr 29, 2009 TUFF(TM) Air Sampling Pumps feature sealed case with rubber overmolding that protects internal electronics from moisture, extreme temperatures, solvents, and impact. Operating from 1.7 or 2.7 Ah battery pack, units offer flow range from 5 mLpm to 4.5 Lpm. Double-acting diaphragm pump mechanism enables real-time flow control and stability across range of sampling media. User interface displays flow, sampled volume, and run duration as well as battery fuel gauge and alarm.

Richco, Inc.    Morton Grove, IL 60053
Apr 29, 2009 Designed to securely close off unneeded panel holes, PGM series hole plugs are available in 34 different sizes to accommodate wide variety of hole diameters and panel thicknesses. Product is RoHS compliant.

Proportion-Air, Inc.    McCordsville, IN 46055
Apr 28, 2009 Suited for use with flow meters, QL3 Pressure Control Valve utilizes current driven variable orifice proportional solenoid valves combined with analog PID circuit on high flow volume booster to optimize air movement. PID circuit integrates error out to maximize resolution, and volume booster is designed so there are no stamped gaskets or molded diaphragms or seal parts; all of parts related to normal maintenance are standard o-rings.

CAT PUMPS    Minneapolis, MN 55449
Apr 28, 2009 For extended durability at 7,000 psi, Model 6801 features duplex stainless steel discharge manifold as well as 316 SS block-style head with optional flushed inlet manifold, providing cooling with high temperature liquids or added lubrication when pumping low lubricity liquids. EPDM, FPM, or PTFE seals are optional for liquid compatibility. Applications include hydrostatic testing, highway and runway cleaning, chemical injection, concrete demolition, and surface prep.

CAT PUMPS    Minneapolis, MN 55449
Apr 28, 2009 Suited for both portable and stationary installation, Model 1810 features 304 SS block-style manifold, high-strength plunger rods, oversized bearings, and chrome-moly crankshaft. Custom Delrin seals and UHMV V-packings offer endurance under high pressure, while 304 SS seat mates with ceramic ball to provide true sphericity. Positive displacement pump is suited for hydrostatic testing, chemical injection, surface prep, and high-pressure tooling.

CAT PUMPS    Minneapolis, MN 55449
Apr 28, 2009 Available as models 6775 (Brass), 6771 (Stainless Steel), 6777 (NAB) to cover various industrial liquid applications, 60 Frame pump series has guided valve design that lends to strength and durability under high-flow operation. Size and weight of each unit facilitate installation, while optional seals and o-rings lend to compatibility and extended life. Matching 316 SS pressure regulator is available for system pressure setting and over-pressure protection.

Lincoln Electric Co. Inc., The    Cleveland, OH 44117
Apr 27, 2009 Modular Extraction Hood features semitransparent welding strips to prevent cross drafts and control airflow direction. Double-panel roof configuration acts as in-line baffle, deflection plate, and spark arrestor to protect ductwork. Incorporating dust hopper collector and MERV 16 rated filters, Statiflex® Filter Bank can contain 1 of 8 filter units, with filtration station ranging in sizes from 2-32 banks. Both systems remove welding fume and grinding particulate during welding applications.

Metallurgical High Vacuum Corp.    Fennville, MI 49408
Apr 27, 2009 Designed to resolve seal issues on Roots(TM) 6 in. blowers, Shaft Seal Kits replace original lip-type seals with mechanical shaft seals, which last longer and stand up to rugged operating conditions. In addition, seals can be replaced without draining oil or removing housing end plate. Large sight glass gives visibility to oil levels and eliminates dipstick on Roots blowers.

Lockwood Products, Inc.    Lake Oswego, OR 97035
Apr 24, 2009 LOC-LINE® Adjustable Hose System is available with hose option for moderate-pressure applications. Its ¼ in. Extended Elbow, when combined with Extended Elements and Element Clamps, allows design of complete coolant hoses that will work for pressures up to 110 psi. This elbow, which curves 90° over 1.5 in., requires 2 Element Clamps to accommodate use with higher pressures. Combined with Side Flow Nozzles or T Fittings, it can create complete rigid circle around cutter.

Flexaust    Warsaw, IN 46580
Apr 24, 2009 Flexaust Sump Pump Hose Discharge Kit includes 1 ¼ or 1 ½ in. I.D. by 24 ft flexible polyethylene drain tubing, universal male thread hose insert with barbed adapter for seal, and hose clamp. Ready for installation, kit is designed to fit all sump pumps.

Bray International, Inc.    Houston, TX 77041
Apr 24, 2009 With ability to prevent valve failures due to erosion, corrosion and vibration, 22-96 in. resilient, seated butterfly valves meet process requirements with chloride content from low to very high parts per million in applications such as seawater, mining, sanitary service and FGD. Splined disc-to-stem connection features matched, precision machined male splines in stem and female in disc, and is available in valve sizes ranging from 22-48 in.

Silvent, Inc.    Highland, IN 46322
Apr 22, 2009 Available with independent adjustment of airflow and temperature at cutting site, Silvent F1 air nozzle allows operator to set air consumption in relation to cold fraction required. It has refrigeration capacity from 0-94 Btu/hr, air consumption from 0-17.7 scfm and temperature reduction up to -99°F. EU Machine Directive and OSHA safety standard compliant unit is available as single unit on Flexblow hose in 3 lengths from 16-24 in., or as 4 nozzle Flexblow unit in 3 lengths from 17-25 in.

Emerson Process Management    Austin, TX 78754
Apr 20, 2009 With pressure-assisting action of valve seal ring, Fisher® POSI-SEAL® A81 ensures complete shutoff against maximum rated pressure drop, regardless of flow direction. Interchangeable sealing technology allows valve body to accept both soft and metal seals, while opening and closing path of eccentric valve disk minimizes contact with seal ring to reduce seal wear. Used with FieldQ® rack-and-pinion actuator, valve can be installed in either horizontal or vertical orientation.

Biohit Inc.    Neptune, NJ 07753
Apr 17, 2009 Designed for molecular biology, microbiology cell culture, and radioactive use, Biohit Filter Tips come in variety of sizes to cover volume range from 0.1-1,200 µl. Made of virgin polypropylene, units are CE/IVD certified and manufactured according to ISO 9001, ISO 14001 & ISO 13485 standards. Filter Tip design prevents liquid sample from touching filter, enabling safer pipetting in reverse and multi-dispensing modes.

MeadWestvaco Corp.    Luke, MD 21540
Apr 17, 2009 Offering opportunity for differentiation, resin-injected Calmar Melodie® Clickit IP is available with wide array of decorative finishes and aesthetic coatings, including iridescence, sparkle, soft touch, metalized lacquering, and custom printing of any pattern or image through sublimation. Available for bottle neck diameters of 13, 15, 17, 18, and 20 mm, pump is suited for markets where fragrances are sold in larger formats or for bulkier men's fragrance packs.

Moyno Inc. Unit Of Robbins & Myers, Inc.    Springfield, OH 45501 0960
Apr 16, 2009 Featuring two-piece drive shaft, Moyno® 1000 compact close-coupled positive displacement pump eliminates need for complete pump disassembly when servicing mechanical seal. It is suited for shear sensitive chemical feeds, adhesives, lime, slurries, and viscous crude oil transfer applications. Unit features low shear pumping action, smooth, non-pulsating flow, and pressure capabilities to 350 psi. Standard flange and open throat hopper models are also available.

Schroeder Industries LLC    Leetsdale, PA 15056-1025
Apr 16, 2009 Available in 7 and 10 MZW spin-on style models, Excellement ZW Particulate Water Removal Media feature water holding capacities suited for mobile filtration systems and bulk transfer systems. Layers of cartridge element include epoxy-coated steel wire fabric, 2 layers of Z media, water removal media, and spun bounded scrim.