Plant Furnishings & Accessories, Electrical Equipment & Systems, Fasteners & Hardware

Clear Surface Mount Cover fits single-gang switches.

January 15, 2016

Featuring clear conduit spacer, Universal Stopper® STI-13200NC offers protection against physical damage, dust, and grime as well as severe environments. Indoor/outdoor polycarbonate unit is sized to fit most single-gang switches and has high-strength continuous hinge. Designed to comply with ADA, cover is less than 4 in. in depth. Other mounting options include flush mount cover or waterproof Type 4X enclosed back box. Read More

Fasteners & Hardware

Bearing Stand-Offs feature one-piece design.

October 22, 2015

Engineered for System Plast™ flanged mounted bearings and Sealmaster® composite-flanged PN Gold bearings, Single-Piece Stand-Offs integrate bolt-spacer ferrule and stand-off in one assembly for sanitation compliance in food/beverage operations. Design eliminates loose parts during installation, optimizes bearing alignment, and creates 5/8 in. gap behind bearing flange for cleaning/inspection. Made of 300 Series passivated stainless steel, stand-offs suit OEM or retrofit applications. Read More

Fasteners & Hardware

Brass SMT Fasteners enhance PCB electrical, mechanical attachment.

June 1, 2015

PEM® ReelFast® brass surface mount fasteners include tin-plated Type SMTSOB™ brass nuts and spacers/standoffs suited for PCB applications requiring optimal electrical and mechanical attachment points. Permanently and concurrently installed with other SMT components on PCBs of any hardness and as thin as .060 in. prior to automated reflow solder process, these corrosion-resistant and conductive products can be used to space or stack boards, mount boards, or attach components. Read More

Fasteners & Hardware

Adhesive-Backed Nylon Supports lock-fit chassis to PCB.

March 31, 2015

Engineered to lock-fit chassis-to-board without use of tools, Nylon Stacking Spacers/Supports have adhesive backing for securing to chassis while other end snaps into PCB with strong, retentive grip. Units are available in sturdy mount or slim line design to accommodate variety of requirements. Supplied in heights from .187–.825 in., supports are constructed of one-piece, flame-resistant molded Nylon, UL rated 94V-0. Read More

Fasteners & Hardware

Round Spacers come in over 250 sizes.

May 22, 2014

Made of molded nylon, Special Standard Round Spacers are available in diameters of 1/8–1½ in. and lengths from 1/8–2¾ in. Products are electrically insulating and resistant to vibration, abrasion, and corrosion. In addition to electronic and electrical applications, spacers can be used as bushings, bearings, rollers, gliders, and bumpers. Read More

Fasteners & Hardware

Self-Clinching Standoffs suit thin stainless steel assemblies.

April 16, 2014

Manufactured from heat-treated 400 Series stainless steel, PEM® Type TSO4™ standoffs are used for stacking or spacing components to or from ultra-thin stainless steel panels as thin as .025 in. and with max hardness of HRB 88 on Rockwell B scale or HB 183 on Brinell scale. Hardened stainless fasteners install permanently; one mating screw is required for final component attachment. Various styles, including thru-threaded or blind threaded versions, and lengths are available. Read More

Fasteners & Hardware

Warm Edge Spacer Bar optimizes acoustic performance.

June 3, 2013

Available in widths from 0.25–1.002 in., TGI®-Spacer is suited for commercial and residential insulating glass products, such as windows, entrance systems, and curtain wall. Product combines high-performance polymers and thin stainless steel, optimizing thermal performance and condensation resistance, as well as acoustic performance for quiet interiors. With TGI-Spacer and 2 lites of 0.25 in. glass, STC rating of 35 and OITC rating of 27 can be achieved. Read More

Mounting & Attaching Products, Fasteners & Hardware

Heat Sink Mounting System ensures optimum heat dissipation.

April 4, 2013

Comprising Type HSCB™ captivating screw and Type HSL™ spring mated to Type HSR™ broaching receptacle nut or standoff, PEM® Heat Sink Mounting System securely attaches heat sinks to circuit boards while providing firm and constant contact to chip component. System integrates audible click feature to prevent over tightening during installation, accommodates slight expansion and contraction of joint components without damaging circuitry, and allows for removal of heat sink if necessary. Read More

Fasteners & Hardware

LED Integrated Standoffs enhance signage and displays.

March 4, 2013

Available in polished and matte chrome, aluminum LED Standoffs for Signage and Displays consume .4 W per unit and output 40 lm. Concept utilizes acrylic or Plexiglas sign holders to which standoffs have been affixed as medium to diffuse backlit illumination to mounted graphics, posters, and promotional messages. Six cool white (6,000K–6,500K) LEDs are integrated in between body of standoff and its screw-on, flat cap. CRI of 70 with beam spread of 120° promotes accurate color representation. Read More

Fasteners & Hardware

Pipeline Rubber Spacer improves topside thermal insulation.

August 31, 2012

By creating 1-2 cm air gap between topside pipelines and thermal insulation, Flexspacer stops direct contact between insulation material and pipe to prevent any damage to corrosion protection on pipe and help ensure thermal performance. Rubber-based product, qualified for use up to +302°F continuous service for 30+ years, can be installed without using hot work or special tools and can be connected and split to desired length using scissors. Read More

Electrical Equipment & Systems, Fasteners & Hardware

Spacer Cable Systems enhance limited-space substations.

July 2, 2012

Intended for substation applications, Spacer Cable Systems consist of messenger cable that supports structure, polyethylene spacers to hold cable across spans, and covered conductor cable. Spacer cable reduces right-of-way requirements at substation exits, promotes efficient use of limited space in substations, and increases reliability on critical feeder circuits at substation exits. After being installed and attached to messenger, spacers support, separate, and clamp phase conductors. Read More

Fasteners & Hardware

Steel Fasteners can be used as nuts or standoffs in SMTapplications.

May 4, 2012

Featuring hex-shaped barrel, ReelFast® microPEM(TM) Type SMTSO(TM) Fasteners install permanently on PCBs in same manner and at same time as other surface mount components prior to automated reflow solder process. Fasteners come in thread sizes as small as No. 0-80 with lengths as short as 0.62 in., and all can be installed in boards as thin as .020 in. Packaged on 13 in. recyclable reels, fasteners can serve as nuts or standoffs to space or stack PCBs, mount boards, or attach components. Read More

Fasteners & Hardware

Spacers/Standoffs have rugged, insulating design.

March 23, 2012

Made of studs and inserts molded in nylon body, Transipillars provide durable, insulated spacer system for board-to-board stacking or board-to-chassis mounting. Studs and inserts, made of galvanized steel and brass, are available in stud/stud, stud/insert, or insert/insert configurations with cylindrical or hexagonal body form. Pillar come in 13-64 mm lengths and can also be customized. Voltage withstand rating exceeds 11K Vdc, and insulation resistance exceeds 10,000 Mohm @ 500 Vdc. Read More

Material Handling & Storage, Fasteners & Hardware

Clamp/Spacer ensures track parallelism.

October 27, 2011

Track Clamp provides defined track spacing to assure track parallelism. Set screws lock track in place, eliminating need for mounting holes, and design acts as stand-off to prevent build up as well as facilitate cleaning in contaminated or wash-down environments. Read More

Fasteners & Hardware

Small, Secure Fasteners accelerate compact electronics assembly.

August 11, 2011

Intended for spacing applications, PEM® Type MSO4(TM) self-clinching standoffs are manufactured from 400 Series stainless steel with threads as small as No. 00 and come in lengths as short as .080 in. PEM® Type MPP(TM) self-clinching micro pins, used for locating/positioning applications, are manufactured from age-hardened A286 stainless steel and designed with diameters as small as .040 in. and lengths as short as .080 in. All products are RoHS compliant. Read More

Fasteners & Hardware

Nylon Spacers and Washers are constructed to grip screw shanks.

May 6, 2011

Featuring IDs that are configured to grip screw shank, nylon spacers and washers slide with minimal effort onto screws while ensuring secured retention via screw threads. Spacers accommodate No. 4, 6, 8, and 10 size screws in body lengths from .125-1 in. in increments of .125 in., while washers accommodate No. 2, 4, 6, 8, and 10, .250 and .375 in. screws with thickness of .032 or .062 in. Read More

Fasteners & Hardware

LED Mounting Spacers assure perpendicular LED positioning.

March 25, 2011

With overall height ranging from 0.120-0.925 in., self-retaining, T-1 LED Mounting Spacers feature internal retention teeth, which secure spacers onto LED leads prior to assembly on PCBs. Design also eliminates possibility of LED lead shorting by separating and retaining component leads while inserting into PCB. Incorporated into molded Nylon 6/6 structure, spacers' 020 in. legs serve dual purpose of heat dissipation and post-solder cleaning. Read More

Fasteners & Hardware

Self-Clinching Standoff Fasteners suit spacing applications.

July 2, 2010

Manufactured from 400 Series stainless steel, PEM Type MSO4(TM) Micro Standoffs are engineered with threads as small as M1.0/#00 and in lengths down to 2 mm/.080 in. Units can be installed into sheet metal as thin as 0.4 mm/.016 in. with max hardness up to HRB 88 on Rockwell B scale. Suited for spacing or stacking applications in compact electronic assemblies, RoHS-compliant standoffs clinch permanently into place by pressing them into properly sized mounting hole using punch and anvil. Read More

Material Handling & Storage, Fasteners & Hardware

PCB Push Spacer features sturdy construction.

July 1, 2010

Made from natural color Nylon 6/6, PCB push spacer model PSD supports heavily loaded PCBs and allows for easy access to underside of PCB. Available in UL94 V2 and UL94 V0, RoHS compliant spacer is offered in 5 standoff heights to meet needs of variety of applications. Read More

Material Handling & Storage, Fasteners & Hardware

Automotive Blade Fuse Holders have PCB-mount design.

June 15, 2010

Fuse holders incorporate 2 receptacle terminals made from brass with tin over nickel plated finish that are pre-assembled to a UL rated 94V-0 glass filled nylon base. Receptacle contacts hold the fuse securely, assuring positive connections and low contact resistance. Mini, Standard, and Maxi versions suit 30, 40, and 60 A applications, respectively, and are compatible with various Littlefuse and Bussman blade fuses. A 2-in-1 thru-hole mount version for Standard and Mini fuses is also available. Read More