Protex Fasteners Ltd    Redditch Herefordsh B98 8PA  United Kingdom
Apr 23, 2012 Available in zinc-plated mild steel or stainless steel, JCS Hi-Grip Worm Drive Hose Clips are suited for domestic, automotive, and industrial applications, or corrosive environments. JCS Hi-Torque Hose Clamps, made of stainless steel, are designed for tough and wire-reinforced hoses. Units feature Lloyds Type Approval for marine, offshore, and industrial use. With stainless steel JCS Multi-Torque banding and connectors, users can produce instant hose clamps to any desired diameter.

All Metric Small Parts (aMsp)    New Hyde Park, NY 11040
Oct 28, 2011 Featuring black oxide finish, MKA5DNMGR555... Series comprises 12 off-the-shelf metric spring steel HRC 46-52 grooveless retaining rings. Products are designed to fit 2-20 mm dia shafts, and allowable axial load ranges from 50-750 N. Intended for grooveless applications, rings can be used for external axial assembly.

Heyco Products    Toms River, NJ 08753
Aug 19, 2011 Manufactured from corrosion-resistant 304 SS, HEYClip(TM) SunRunner(TM) clips aid PV module wire management. Products fit module frames up to .125 in. thick and features double-compression design that accommodates from one 12 gauge USE-2 to two 10 gauge PV-1000 solar wires. Also designed for use with other cables from .20-.30 in. dia, clips have smooth edges that prevent damage to cable insulation as well as locking tabs that securely fasten product to module extensions or other panels.

Akro-Mils, A Myers Industries Co.    Akron, OH 44301
Dec 03, 2010 Bin Retainer Clip prevents AkroBins® and ProHANGER® storage containers of any size from falling off louvered panels and louvered rack systems of work trucks/vans while in transit. Clip is made of engineering-grade plastic and does not require complex installation or permanent adherence to surfaces. It can be removed, replaced, and reused without damage to bins or panels and suits service vans of maintenance workers and others tradespeople who store and transport supplies and materials.

Pentair Technical Products, Calmark    San Diego, CA 92121
Dec 02, 2010 Respectively offered in .225 x .260 and .210 x .275 in. profiles, Calmark® Series 223 and 224 Card-Lok Retainers secure board module assemblies to cold wall in cold plate - heat exchanger applications - without torque wrench. Screw-actuated wedge action locks board module assembly in place with standard hex wrench, and secure hold meets military 2-level maintenance systems requirements. Design applies no insertion or extraction force on board module assemblies, eliminating overtightening.

Keystone Electronics Corp.    Astoria, NY 11105
Aug 24, 2010 Engineered to withstand recharging cycles, in addition to shock and vibration, Catalog No. 54 PC Battery Clip features 3-legged, THM design for low-profile placement into dense PC boards. Thru-hole unit not only holds 3.7 V rechargeable batteries, but will also accommodate A, 2/3A, 17335, 17450, 17500, 17650, 18500, and 18650 size cells. Manufactured from .012 in. thick spring steel with Tin Nickel plate finish, unit holds battery cells firmly and securely in position.

ERICO    Solon, OH 44139-2631
May 06, 2010 With CADDY® GLIDER, installers can attach one or more electrical boxes to Telescopic Screw Gun Bracket. Once attached, installer can adjust box location and width of bracket between studs. Up to 3 boxes can be installed in standard 16 in. spacing. CADDY Glider is suitable for variety of applications, especially prefab where some assembly is done off-site prior to final installation.

CTS Corp.    Elkhart, IN 46514
Jan 05, 2010 Featuring quick ¼ turn locking action, ZIF Prime meets Military Standard 810 vibration/shock test performance. Uniform clamping pressure eliminates hot spots, creating uniform heat transfer, and ZIF characteristics are unaffected by adverse environments. Designed for .031, .050, .084, .093, and .125 in. thick circuit boards, retainers exhibit thermal resistance as low as 0.9°C/W/in. of retainer length. ZIF provides visual indication that rods are in open/closed position.

Micro Plastics, Inc.    Flippin, AR 72634
Oct 08, 2009 Accommodating up to 4 wire handling accessory fasteners which mount into 3/16 in. dia holes on clip, Din Rail Clip snaps onto DIN rail and is easily removable to allow reconfiguration of wiring. It can be used in conjunction with wide variety of wire/ cable clips that can mount in 3/16 dia hole and 1/16 in. panel. Clip is molded of nylon 6/6 which offers electrical insulation and is UL rated 94-V2 for flammability.

Smalley Steel Ring Co.    Lake Zurich, IL 60047
Aug 06, 2009 Hoopster® Retaining Rings offer low radial profile which will not twist or deform under load. Suitable for thin wall tubes and light to heavy loads, units install without special tools. They are available in standard sizes from 3/8-3 in. and offered in carbon and 302 SS.

HellermannTyton, A Spirent Co.    Milwaukee, WI 53224
Jun 01, 2009 Designed for routing, mounting, and securing wire harnesses to mounting holes, Assorted Fir Tree Bundling Clips feature staggered fir tree design that provides low insertion force and high pull out force. Suited for use with standard panel thicknesses between 0.7-5.75 and 0.7-18.0 mm, respectively, TC6FT6 and TC6FT6LG orient bundle directly over mounting hole. SOC8FT6 orients bundle 90° from mounting hole, and suits standard panel thickness between 0.7-5.75 mm.

Schroff, Inc.    Warwick, RI 02886
May 28, 2009 Designed to prevent damage to board module due to over tightening, Calmark(TM) Series 223 and 224 five-piece Card-Lok retainers suit cold plate-heat exchanger applications. Standard hex wrench can be used to lock board module assembly into cold wall, while wedge action design provides maximum contact between thermal paths on board module assembly and heat-sinking surface for maximum thermal transfer. Retainers are offered in variety of standard lengths, mounting options, and finishes.

Keystone Electronics Corp.    Astoria, NY 11105
Dec 05, 2008 Designed to firmly secure inserted batteries, surface mount AA and A Battery Clips feature flow hole SMT solder tail design, which optimizes joint strength and assures battery retention. Units are made of .012 in. thick, nickel-plated steel and are available in bulk, or on tape and reel with 125 pieces per 15.0 in. reel. A 44 mm wide Polystyrene Carrier Tape, meeting ANSI/EIA-481 standards, is used as reel with parts mounted on 24 mm pitch.

Smalley Steel Ring Co.    Lake Zurich, IL 60047
Oct 02, 2008 Specified for automotive and heavy equipment industries and directly interchangeable with Eaton® rings, XAH, XAS, XDH, and XDS series of Snap Rings come in 300 sizes ranging from .375-10 in. and 13-300 mm. Available in both carbon and 302 stainless steel, they are produced by edgewinding, and specials can be made from .200-90 in.

North Safety Products, Inc.    Cranston, RI 02920
Jun 05, 2007 Made from heavy-duty, nonconductive plastic material, GC2000 Goggle Clips snap onto brim of hard hat and hold goggle headband securely in place. Units are designed primarily for North and Fibre-Metal brand hard hats, but will also work on multitude of competitor hats as well. Clips are supplied in bags of 3, though most hard hat/goggle combinations only require 2 clips.

Heyco Products    Toms River, NJ 08753
May 21, 2007 Characterized by precision-molded, 2-piece mechanism with attached integral locking closure, Flexicon Conduit Mounting Clips provide secure means of mounting Flexicon FPAS or FPI liquid-tight conduit, cables, and tubing into vertical or horizontal indoor/outdoor configurations. Constructed from polyamide 6/6 Nylon, units accommodate .25-2 in. conduit and tubing and are resistant to salt water, weak acids, gasoline, oil, grease, and common solvents.

Keystone Electronics Corp.    Astoria, NY 11105
Feb 21, 2007 Available in yellow (PN 8896), orange (PN 8897), pink (PN 8898), and green (PN 8899), anti-static Integrated Circuit Tray Clip eliminates need to draw lines, write dates/instructions, and paste papers on JEDEC trays. It withstands temperatures up to 300°F, and is suited for use with re-baking processes used on MSDs. Manufactured of PBT and polyether, clip can be used for added identification of single or stacked trays and promotes use/re-use of IC trays.

Stanley-Proto Industrial Tools; A Division of The Stanley Works    Conyers, GA 30013
Jan 29, 2007 One-piece Proto® Retaining Ring with crush gauge provides visible warning if wrench or socket has become worn or is in danger of breaking. Unit consists of straight pin connected at one end to inside of O-shaped ring. Pin's free end is inserted through index holes in socket and wrench anvil, while ring snaps into groove on outside of socket. Available for ¾-1½ in. drive sockets, ring is made from resin material that bends when subjected to pressure, rather than breaking.

International Electronic Research Corp.    Burbank, CA 91502
Jan 19, 2007 Designed for military and commercial applications, custom aluminum iZIF(TM) integrates heat frame and circuit board retainer into one unit. No torque wrench or special tools are required, and features include zero insertion/extraction force; uniform clamping force and thermal distribution over entire length; ¼ turn lock/unlock (quick disconnect); and standard 1/8 SHCS-drive (Allen-key) clamping/locking rod. Thermal performance, per length, is rated equal to or under 1.2°C-in/W.

SDP/SI (Stock Drive Products/Sterling Inst)    New Hyde Park, NY 11042 5416
Oct 11, 2006 Designed for use on ungrooved shafts, bosses, tubes, and studs, S73NW2 Series exerts frictional hold against axial displacement from either direction. Units offer resistance to relative rotation between ring and retained parts, and are reusable while not marring shaft surface during assembly or disassembly. Made of PH 15-7 Mo stainless steel, rings are designed for shaft diameters from 3/32-¾ in. diameter and offer clearance ranges from .26-1.32 in.