Irwin Industrial Tool    Huntersville, NC 28078
May 14, 2013 Impact Performance Series™ fastener drive bits, available in Phillips®, square recess, Torx®, and tamper-resistant Torx® bits, are manufactured with cold-forged steel. Designed to drive fastener from side, nutsetters have lobular design that optimizes clearance on corners of fastener. Insert bit holders feature c-ring design with external clip that fits into retaining ring notch of insert bit, while socket adapters are available with ball-lock retention design and have forged body.

PennEngineering® (Penn Engineering)    Danboro, PA 18916
May 13, 2013 PEMSERT® self-clinching flush nuts are designed for attachment applications where thin metal sheets can benefit from introduction of strong load-bearing threads without protrusions being created on either side. Upon permanent installation in aluminum or steel sheets as thin as .060 in., top and bottom of sheet remain flush. Metal displaced by hexagonal head flows evenly and smoothly around back-tapered shank of fastener to securely lock nut permanently into place.

Thomas & Betts Corp.    Memphis, TN 38125
Feb 14, 2013 Plated in rugged Galv-Krom® finish for corrosion resistance, Kindorf® Universal Cone Nuts have distinctive blue cone that fosters identification and come in ¼-20, 5/16-18, 3/8-16, and ½-13 thread sizes. Design ensures nuts, equally compatible with 1 ½ in. Kindorf® and 1 5/8 in. Superstrut® strut depths, slide into optimal location in each channel. Installation is accomplished without springs, reducing time and eliminating chance of jamming in strut slots.

HARD LOCK INDUSTRY CO., LTD.    Elk Grove Village, IL 60007
Feb 05, 2013 Available in UNC threads with sizes from ¼–1 in. in 1/16 in. increments, HARDLOCK Nuts have all-metal construction and can be used repeatedly while maintaining loosening prevention effect. Structure prevents loosening by combining centered concave top nut and off-centered (eccentric) convex lower nut to form wedge when tightened. This applies force perpendicular to bolt, and when top and bottom nuts are tightened, self-locking force of wedge prevents loosening.

A-Lex International Marketing    Elk Grove Village, IL 60007
Jan 31, 2013 Available in UNC threads with sizes from ¼–1 in. in 1/16 in. increments, self-locking HARDLOCK Nuts prevent loosening by combining centered concave top nut and off-centered convex lower nut to form wedge when tightened. This applies force perpendicular to bolt, and when top and bottom nuts are tightened, self-locking force of wedge prevents loosening, even when subjected to repeated vibrations and shock. Featuring all-metal construction, nuts can be used repeatedly.

J. W. Winco, Inc.    New Berlin, WI 53151
Jan 03, 2013 Designed for use with aluminum extrusions, GN 506.2 T-Nuts can be inserted at any point along slot and slid into position. Spring washer prevents unwanted movement of nut in slot, which is desirable on bed with T-slots in vertical position and enables different slot heights to be bridged. RoHS-compliant T-nuts are made of C45K, zinc plated blue passivated steel and spring washers are stainless steel.

J. W. Winco, Inc.    New Berlin, WI 53151
Jun 19, 2012 Available in metric sizes, series GN 506 T-Nuts with Guide Step can be turned into position. These products can be inserted at any point along slot, and spring-loaded ball prevents unwanted movement of nut. Able to be used to fit hinges to T-slot extrusion rails, RoHS-compliant T-nuts are made from zinc-plated, blue-passivated C 45K steel. Available threads range from M3-M8, accommodating slot widths of 5 or 8 mm.

Sherex Fastening Solutions    Tonawanda, NY 14150
May 16, 2012 Facilitating accurate attachment of components in off center applications, RIV-FLOAT®-SHORT rivet nuts allow manufacturers to account for tolerance stack up and resolve alignment issues during product assembly. Knurls increase spin out resistance in soft materials, and design allows installation from front side of work piece. Fastening technology is designed for post installation in applications where cage nuts, clinch nuts, floating nut plates, or weld nuts are typically used.

Igus, Inc.    East Providence, RI 02914 0349
May 09, 2011 When equipped with Quick-Release nut, DryLin® lead screw table can be adjusted by pushing button, which releases linear slide from thread. Carriage can then be manually pushed into place and locked in position. Nut uses fast-action release, which makes it possible for half of thread transmitting force to move out of threaded area. Once any adjustments have been made, partial thread locks back into its other half when pushbutton is released.

ESCO    Brooksville, FL 34604
Oct 07, 2010 Intended for hub piloted wheels, Skirt Nut model No. 40125 acts as replacement for common 22 x 1.5 mm wheel attaching nuts. It centers rim/tire onto wheel and prevents dangerous clocking. Extended threading allows nut to penetrate into Hub-Piloted Disk Wheel extra 3/16 in. into stud hole, preventing any movement which results from extra space between stud and hub base. Coated in graphite-based sealant, nut meets/exceeds Standard SAE J1965 and will not rust onto wheel/rim.

Alliance Plastics    Erie, PA 16510
May 10, 2010 Made of Nylon 6.6, Nuts, Screws, and Bolts are resistant to oils, rust, corrosion, abrasion, and chemicals. Nylon also provides vibration resistance, as well as electrical insulation due to its dielectric constant. Screws and bolts are offered in several head types including binder, round, flat head, fillister, hex, socket, countersunk, and pan head. All threads are imperial with slotted and Phillips availability.

Hard Lock Industry Co., Ltd.    Inverness, IL 60067
Apr 22, 2010 Utilizing wedge principle that creates self-locking force, Hard Lock Nuts withstand loosening from vibration in critical mechanical applications. Initial axial force (tightening strength) is maintained, preventing screws from coming loose and bolts from breaking. Products pass American Vibration and Impact Test NAS 3350/NAS 3354 and will retain more than half of tightening torque when loosened by 45°. In that state, vibration also exhibited no loosening effect.

Advanced Machine & Engineering Co.    Rockford, IL 61103
Oct 23, 2009 Providing positive locking without washers and keys, Spieth Locknuts ensure thrust bearing retention on compressors, shafts, spindles, and other industrial/commercial applications. Two axially arranged radial grooves, one from outside and one from inside, result in diaphragm-like cross-section to give locknut predetermined axial elasticity. Full circumference contact ensures locknut does not back off, even when subjected to extreme shock loads.

Duff-Norton    Charlotte, NC 28241 7010
Oct 16, 2009 Screw and nut systems are comprised of tight tolerance acme and ball screw and nut assemblies with minimal backlash ratings. Materials of bronze, plastic, and steel are selectively chosen for wear resistance, and all ball screws are Manganese Phosphate-coated. Available screw diameters range from ½-9 in.

J. W. Winco, Inc.    New Berlin, WI 53151
Aug 19, 2009 Made of forged, zinc-plated steel with tensile strength of 1,000 N/mm², Series GN 6333 hex nuts are suited for applications where nut needs to be moved quickly to clamping position, and to be removed quickly after loosening. With no locking of thread, RoHS compliant nuts provide easy mounting/dismantling, even in tight spaces.

Precision Alliance, The    Fort Mill, SC 29708
Mar 04, 2009 Machine Screws, Nuts, and Washers are made from non-magnetic titanium material (TW270 type I and TW340C type II) and are available in sizes from M2-M12 in socket head, pan head, and flat head styles. Non-magnetic characteristics (0 Magnetic Flux Density) and chemical resistance provide solution for semiconductor protection equipment and devices, aircraft, spacecraft, medical instruments, and robotic assemblies.

Sherex Fastening Solutions    Tonawanda, NY 14150
Dec 08, 2008 With design that promotes thread strength, Dejond TUBTARA® 304 Stainless Steel M10 fully cold formed rivet nuts come in 4 different types. Available sizes include SPO (Flat Head, Round Shank, Open End), SPX (Flat Head, Round Shank, Closed End), SFO (Countersunk Head, Round Shank, Open End), and SKO (Low Profile Head, Round Shank, Open End).

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
Oct 23, 2008 Available in mild steel and high carbon, as well as 304 and 316 SS, Staytite Nuts are assembled with stainless steel spring insert, ensuring their abilities do not suffer from corrosion. As nut is installed on screw thread, insert engages with base of screw thread and flexes upward. During use, Staytite nuts resist vibration and loosening because inserts flex downwards and are pulled into close contact with screw threads by upwards anti-clockwise rotation of nut body.

Sherex Fastening Solutions    Tonawanda, NY 14150
Sep 12, 2008 Facilitating attachment of components in off center applications, RIV-FLOAT(TM) can accommodate for tolerance stack up in manufacturing process. Floating nut with .020 in. radial float aligns to drive angle of screw and eliminates cross threading and spin out. Product is suited for post installation in applications where cage nuts, clinch nuts, floating nut plates, or weld nuts are typically used.

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
Jul 09, 2008 Providing electrical insulation and resistance against heat and chemicals, Alumina Ceramic Fasteners may be used in hot water and chemical pumps as well as electronic applications such as electrical transformers and computer equipment. Ranging in size from M3-M10, fasteners include slotted flat fillister head machine screws, hexagon headed bolts, and hexagon and Dihedral nuts.