Sherex Fastening Solutions    Tonawanda, NY 14150
Sep 12, 2008 Facilitating attachment of components in off center applications, RIV-FLOAT(TM) can accommodate for tolerance stack up in manufacturing process. Floating nut with .020 in. radial float aligns to drive angle of screw and eliminates cross threading and spin out. Product is suited for post installation in applications where cage nuts, clinch nuts, floating nut plates, or weld nuts are typically used.

Micro Plastics, Inc.    Flippin, AR 72634
Sep 03, 2008 Injection molded in natural Nylon 6/6, Eye Bolts are resistant to aromatic, chlorinated, and ketone solvents as well as gasoline, oils, greases, and animal and vegetable oils. Thread sizes range from 6-32 with varying lengths from 1 ¼ to 5 ½ in.

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
Jul 09, 2008 Providing electrical insulation and resistance against heat and chemicals, Alumina Ceramic Fasteners may be used in hot water and chemical pumps as well as electronic applications such as electrical transformers and computer equipment. Ranging in size from M3-M10, fasteners include slotted flat fillister head machine screws, hexagon headed bolts, and hexagon and Dihedral nuts.

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
Jun 20, 2008 AURUM(TM) cross recessed pan head, socket head cap screws, hexagon nuts, and washers are made of AURUM thermoplastic polyimide resin. Brown in color, material exhibits heat resistance that enables continuous use at 240ºC and clean characteristics that ensure outgas is reduced to microscopic levels. Amounts of metallic impurities, such as alkali metal, are also reduced to microscopic levels. UL 94V-0 flame resistant material is also resistant to chemicals, plasma, radiation, and abrasion.

J. W. Winco, Inc.    New Berlin, WI 53151
May 30, 2008 Offered in blank, tapped, and tapped through hole versions, Wing Nuts have hot stamped, matte shot-blasted finish. They feature slight dimple on ends to permit better grip and provide increased finger contact area. For certain minimum quantities, blank version can be tapped or reamed in inch or metric sizes to meet customer requirements.

Smartbolts    Gaithersburg, MD 20877
Apr 15, 2008 HR (high resolution) SmartBolt has built-in monitoring device that changes from yellow to green and vice-versa to provide at-a-glance visual indication of proper tightening or out of spec performance. Bolt clamp tension changes of 5% or less are discernable by color changing indicator, which has no moving parts and operates entirely by elastic flexure and fluid migration. Bolt is resistant to degradation from severe vibration levels.

Jergens, Inc.    Cleveland, OH 44110
Mar 27, 2008 Spinner-Grip Flange Locking Bolt has conical flange design that locks bolt to part without need for lock washer. It can be uninstalled and reused without reapplication of locking patches or additional hardware and can be used in zince-plated or corrosion-resistant SS applications. Also resistant to vibration, bolt is suited for industries such as material handling, construction, medical, and packaging.

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
Mar 27, 2008 Available in class 8 zinc-plated steel and AISI-304 stainless steel, Hardlock Nuts are reusable without loss of locking ability and require only spanner for installation. Upper nut is threaded down screw until machined recess comes into contact with tapered cone of lower nut. Lower nut is held stationary, either by being seated or with spanner, and locking torque between two nuts is induced. Held stationary by 3 locking forces, nuts offer resistance to vibration.

Image Industries, Inc.    Huntley, IL 60142
Mar 17, 2008 Offering full range of weld stud fasteners and equipment including arc weld studs, capacitive discharge weld studs, and cable management studs, POWERfast(TM) System withstands harsh environments and is suited for isolation bushings, grounding lugs, and other access panel applications. System also includes hinge pins, security bolts, door rods, and paint stripping nuts.

Power Fasteners Inc.    New Rochelle, NY 10802
Mar 03, 2008 Featuring one-piece stainless steel clip design, Power-Stud(TM)+SD2 carbon steel bolt is designed for use as mechanical anchor in concrete and other masonry applications. This fully threaded, wedge anchor meets International Building Code (IBC) requirements for strength design (cracked concrete). Bolt is available in 3/8, ½, 5/8, and ¾ in. diameters and various lengths from 3-8½ in.

Eagle Stainless Container Inc.    Warminster, PA 18974
Jan 30, 2008 Optimizing quality assurance, Advantage Wing Nut and Clamp Assembly incorporates Advantage Wing Nut with Nitronic 60 coating, which resists corrosion and includes anti-galling properties. Tip and seat are precision-machined, providing positive lock, while electro-polished clamp offers corrosion resistance and smoothes screw head. Hex end on nut and available torque wrench allow for exact calibration to meet 35 or 55 lb-in.

Advanced Machine & Engineering Co.    Rockford, IL 61103
Jan 24, 2008 Suited for applications where space is limited, Spieth Type MSF Locknuts utilize clamping screws with socket head similar to TORX system screw to optimize handling, mounting, and service life of tools used for tightening. Units feature Spieth locking principle, which provides vise-like locking of locknut.

Rino Industries Ltd.    Chesterfield S41 9RN  United Kingdom
Dec 18, 2007 Requiring one operation instead of two, Barb Nuts are cold-formed hexagon nuts with external shakeproof washers, while Carp Nuts have same design but are combined with conical spring washer. Nuts are made from low carbon steel SAE 1010 with Rockwell Hardness of C-30 max, and washers are SAE1050-1065 with hardness of HRC40-46 max. Free to rotate on nuts, washers are available in either yellow or white chromate finish.

Acument(TM) Global Technologies North America    Sterling Heights, MI 48314
Dec 12, 2007 Optimizing powertrain torque transmission, Z-Form Zero Clearance Bolt and Sleeve Assembly prevents lateral shift and slippage in high-shear applications. Shoulder expands deformable steel sleeve during installation, blocking out all clearance between bolt shoulder and through-hole in clamped components. Available in M6-M12 sizes, fastening system is suitable for automotive and truck ring gears, floating axle hubs, brake and suspension components, flex plates, and flywheels.

Marketing Masters, Inc.    Issaquah, WA 98027
Nov 27, 2007 Employing floating metal nut housed in composite clip, Torlon® Composite Clip Nuts withstand torque loads in excess of 100 lb-in. and are used to secure flooring, fairings, and interior trim. Nuts will not scratch structure's primer or plating during installation and/or removal and are not susceptible to corrosion. Able to be injection molded, Torlon® polymer material provides strength competitive with metal, passes FAA flammability tests, and is unaffected by aviation fluids.

PennEngineering® (Penn Engineering)    Danboro, PA 18916
Nov 01, 2007 PEM® spinning clinch bolts for thin metal panels install securely using controlled clinching action to captivate screw while allowing it to spin freely in sheet, which enables quicker attachment of mating hardware by eliminating need for loose fasteners. Bolts include Type SCB(TM) fasteners featuring unthreaded neck for axial float and Type SCBJ(TM) hardware with jacking feature. They come in various lengths and thread sizes from 4-40 through 6-32 and M3 through M4.

Bosch Power Tools & Accessories    Mt. Prospect, IL 60056
Nov 01, 2007 Adapter nut lets users cut with any Bosch hole saw and with most major brand hole saws. It features hex shank for installation and removal with quick change mandrels. Heavy-duty hex drive design ensures that hole saws lock quickly and securely into place. Users can attach adapters to their cups, drill hole, and pull back on mandrel to change cup sizes in seconds, and can also eject plug upon angled re-insertion of pilot bit.

J. W. Winco, Inc.    New Berlin, WI 53151
Sep 06, 2007 Made of black nylon plastic with smooth, glossy finish, Hollow Knurled Nuts and Knobs have tapped through inserts of zinc-plated steel molded in. On clamping applications, partially protruding insert prevents chipping of plastic.

Edward W. Daniel Co.    Cleveland, OH 44105
May 11, 2007 Manufactured to DIN 580 and DIN 582 specifications, Eyes Bolts (sizes from 6-42 mm) and Eye Nuts (sizes from 8-30 mm) come proof load tested and certified. They operate over -20 to +200ºC range without lifting capacity impairment and are passivated for optimal corrosion resistance. CE-compliant, electropolished products suit applications such as chemical equipment, food handling, pressure vessels, enclosures, sanitary equipment, and nuclear components.

Jergens, Inc.    Cleveland, OH 44110
Apr 26, 2007 Available in 18/8 SS, Spinner-Grip(TM) Flange Lock Nuts are suited for use in industries such as chemical, fluid process, medical, food service, automotive, and industrial. Free-spinning design eliminates need to tighten by wrenching nut down bolt, and nuts lock base to part, providing tensile strength to hold entire fastener assembly. Units usually do not require use of flat washers, and withstand wide variations in temperature.