American Cap Company, LLC
Wheatland, PA 16161
Nov 15, 2005 Safety Snap-Cap limits access to hazards by securing valve operation with locking cap, minimizing possibility of misuse and vandalism. Unit meets standards of DOT and Compressed Gas Association by attaching securely to high and low pressure cylinders. Offered in safety yellow, Snap-Cap is available for fine and coarse thread configurations. Custom lettering and color options enable companies to tailor look of unit to meet unique requirements.

APM-Hexseal Corp.
Englewood, NJ 07631
Nov 08, 2005 Pre-assembled, self-sealing fasteners, compatible with all surface finishes, provide fastening and sealing integrity in one unit. Available in various materials, integral o-ring is held captive in precision engineered groove under head. Vibration-resistant and reusable machine screws, rivets, bolts, and nuts feature self-sealing, vibration-resistant SEELOC® washers with silicone rubber section molded and bonded to stainless steel formed washer.

SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Oct 28, 2005 Shaftloc(TM) rotating component fastening device secures shaft-mounted parts to unmachined inch and metric shafts from 1/8-½ in. Product consists of 2 slotted sleeves: outer sleeve with hexagonal head; cylindrical OD; and threaded ID, and inner sleeve with threaded OD and cylindrical ID. Thread is not symmetrical and creates continuous inclined surface to amplify forces, resulting in increased torque transmission capability between component and shaft.

PennEngineering
Danboro, PA 18916-1000
Oct 27, 2005 PEM® Self-Clinching Type TD(TM) cable tie-mounts and Type TDO(TM) hooks provide permanent attachment points for mounting wires and cables to electronic chassis or enclosures. Both are RoHS compliant and offered in several sizes for installation in metal sheets ranging from .040-.125 in. thick. Tie-mounts allow users to slide ties through hardware's eye for fast cable mounting, while hooks enable users to attach, remove, and return tie-bundled wires at mounting points.

Wurth Service Supply
Indianapolis, IN 46268
Oct 19, 2005 TineLok(TM) Fastening System prevents loss of clamp load in applications where vibration is present. Bolt design is engineered with longitudinal channels along thread, while nut incorporates 3 tines that engage bolt thread and prevent rotation of nut and loosening caused by vibration, assuring secure joint and maintenance of clamp load. Fastener requires no special tool for installation.

SKF Motion Technologies
Bethlehem, PA 18017
Oct 14, 2005 Corrosion resistant NILOS®-Rings provide barriers for ball and roller bearings to protect against abrasive particles and other debris that could cause machinery downtime. Units are offered in range of sizes for sealing bearing's outer or inner ring and can be specified for circumferential speeds up to 1,000 sfpm at contact diameter. NILOS-rings are also available in galvanized steel and brass and can be customized to meet application requirements.

Micro Plastics, Inc.
Flippin, AR 72634
Oct 13, 2005 Available in No. #4, #6, and #8 screw sizes and lengths from 1/8-1 in., Stackable Snap-In Standoffs are molded in Nylon 6/6 material, and are also available in UL94-V0 Nylon. Units snap into board and maintain spacing when screw is removed. They are self-aligning and self-retaining to provide screw insulation in multi-level applications.

NYLOK Corp.
Macomb, MI 48042 4007
Oct 07, 2005 NYSTAY® Fasteners provide temporary locating patch that holds fasteners in place during transport and on automated production lines. Polymer can be applied to both threaded and unthreaded fasteners, allowing manufacturers to temporarily secure placement of components during interim period prior to final assembly. NYSTAY fasteners can replace previous method of using plastic washers to hold solid rivets.

Wurth Service Supply
Indianapolis, IN 46268
Sep 20, 2005 Able to prevent loss of clamp load in applications where vibration is present, TineLok(TM) has bolt design engineered with longitudinal channels along thread. Nut incorporates 3 tines that engage bolt thread and prevent rotation of nut and loosening caused by vibration. Ensuring secure joint and maintenance of clamp load, fastener provides positive vibration resistance and requires no special tool for installation.

Guden, H. A., Co., Inc.
Ronkonkoma, NY 11779
Sep 12, 2005 Made of 3003 series alloy, AL Series is available in .040, .050, and .060 in. leaf thicknesses with .50 in. knuckles. Hinges are suited for applications being machined or put through secondary processes. Standard 5052 alloy AA Series is offered in similar sizes but used primarily in military spec applications.

Richco, Inc.
Chicago, IL 60680
Aug 24, 2005 Designed to meet requirements for products that can be easily removed as well as requirements of European WEEE Initiative, WSLTRA saddle is mounted with arrowhead design that is removed from above board. Locking top is releasable for repair, replacement, or addition of wire or cable. Made of RoHS Compliant Nylon 6/6 material, wire saddle is also available in flame-retardant UL94 V0 material.

ERICO, Inc.
Solon, OH 44139-2631
Aug 22, 2005 CADDY® SFCLT Clamps attach fixtures securely to ceiling frame member, and prevent T-bar from twisting and disconnecting at T-Bar intersections in seismic event. Reusable clamps also prevent fixture from separating from T-Bar framework and can withstand force of standard fire hose. Clamps consist of connectors for 2 x 4 ft and 2 x 2 ft light fixtures, as well as end-to-end and side-by-side connections of light fixtures, and for reinforcement of T-Bar main runner joints.

Elma Electronic Inc.
Fremont, CA 94538
Aug 12, 2005 Featuring 7 mm wide, zinc-plated steel construction, Telescopic Cabinet Rails enable 84HP wide sub-racks to be mounted in 19 in. cabinets. Roller-assisted rails meet MIL standards, and are rated to 90 kg dynamic loading per pair, with up to 566 mm extension. For safety, rails may be locked at full extension. Adjustable mounting brackets suit cabinet depths from 582–1,001 mm. Fixing kits and closed fixing holes ensure secure mounting in high-density applications.

Flexible Steel Lacing Co.
Downers Grove, IL 60515-4200
Aug 11, 2005 Flexco® R9S Scalloped Edgeâ„¢ Fasteners feature 8-rivet attachment for high-tension belts with mechanical fastener ratings up to 2,000 PIW. Stamped from 0.135 in. 300 series stainless steel, units accommodate belt thicknesses from 15/32–1 in. running on conveyors with minimum end-pulley diameter of 42 in. Fasteners grip belt end between top and bottom plates, are 1½ in. wide and joined at one end by 2 hinge loops sized to accept 5/8 or 3/4 in. dia hinge pins.

Southco
Concordville, PA 19331 0116
Aug 08, 2005 Push-to-Close Slide-Bolt Latch provides secure latching with convenience of being able to slam latch closed, even if lock is engaged. Available in choice of steel or stainless steel, unit offers max working load of 125 lb. Steel, paddle-style actuator handle provides solid grip for gloved hands in construction, off-highway, and industrial applications. Riveted slide bracket permits installation of internal release handle inside enclosure.

Southco
Concordville, PA 19331 0116
Jul 25, 2005 Featuring flush-mount design, Southco Point latch is available in curved and angular styles with chrome- and brass-plated finishes. Base latch mechanism is push-to-close design with retractable pull knob. By touching its surface, solid metal knob pops up to provide contoured grip for opening latch. Door can thereafter be slammed shut without harming latch. Consistent positioning is facilitated by one-piece polycarbonate body that aligns square to panel.

Fortress Interlocks Ltd
Erlanger, KY 41018
Jul 21, 2005 Safety key module enables operator to retain machine activation key while entering potentially hazardous area, ensuring only authorized personnel can access guarded area. Constructed using stainless steel and zinc alloys, AmGard combines trapped key and gate switch technology to control access to equipment protected by safety guarding with sliding or hinged doors. It includes solenoid-controlled locks and is ingress protected to IP67.

J. W. Winco, Inc.
New Berlin, WI 53151
Jul 12, 2005 Featuring inch or metric mounting threads, shoulder-type Revolving Ball Knob can be mounted on handwheels, crank handles, and other turning or steering mechanisms. Knob is produced from black phenolic plastic with steel threaded spindle and black oxide finish. It helps prevent damage to operator's hands when frequent rotation of steering or turning mechanism is required.

Virtio Corporation
Campbell, CA 95008
Jul 07, 2005 Designed for i.MX31 and i.MX31L multimedia application processors, VPMX31 provides users with functional-level model that can boot operating system and run application code to develop system software before hardware is available. Virtual I/O technology allows developers to connect external hardware to platform through host PC and evaluate software in full system configuration. Platform has image processing feature and can also simulate peripherals.

Southco
Concordville, PA 19331 0116
Jul 05, 2005 Vise-Action® Series N4 Compression Latches offer positive sealing for applications where shock or vibration can loosen conventional latches and where gaskets are used for environmental sealing or noise reduction. Turn of T-handle rotates latch's cam into position and pulls it snug with consistent compression. Adjustable cam options provide grip range from 0.51–4.0 in. Three out of 4 models feature flush-mount recessed steel cups to store T-handle.