General Cable    Highland Heights, KY 41076
May 07, 2013 Intended for food and beverage industry, portable rubber cords with GenClean™ cleanable jacket technology permit organic remnants to be removed in wash cycle, substantially reducing environmental conditions conductive to microbial growth. For water wash-down, water temperatures up to 212°F are acceptable, and maximum temperature for operation is 140°F. Jacket is abrasion-, cut-, heat-, flame-, sunlight-, and chemical-resistant.

CABLExpress    Syracuse, NY 13221
Dec 05, 2012 Featuring 2 mm diameter, Skinny-Trunk® Fiber Optic Patch Cord ensures that critical airflow paths in data center are not blocked and allows for substantial data center infrastructure cabling reduction without altering existing technology. Connector body is also shortened, further optimizing flexibility and manageability. In addition, cord features maximum insertion loss of 0.15 dB per LC.

General Cable    Highland Heights, KY 41076
Nov 07, 2012 Part of 17 FREE™ offering, Carol® Brand Carolprene® Types SOOW and SJOOW are rubber portable cords with temperature rating of 105°C. TRU-Mark® Sequential Footage Marking system helps with cable management efficiency for both distribution and end-user base. With removal of halogens, cables do not contain any chlorine, fluorine, bromine, or iodine, minimizing overall toxicity and resulting in environmentally friendly Green product.
 

TAKK Industries Inc.    Cincinnati, OH 45247-2238
Jul 28, 2011 Constructed of Thunderon® microfibers with thousands of conductive points causing ionization and grounding of static charges, Anti-Static FlexCord removes static electricity from moving webs, conveyors, and parts. Non-sparking product can be precisely positioned, mounted in confined spaces, and used in hazardous locations. Available in 32.5 ft rolls, FlexCord stretches to approximately double its length allowing it to be pulled taut and protecting material from flow snags.

Icc    La Mirada, CA 90638
Feb 04, 2011 Constructed of PVC, HiPerLink Mobile Patch Box features 6 open ports that can be pre-configured with CAT 6A, CAT 6, CAT 5e data, voice, fiber optic, audio, or video modules. Designed to be installed in open environments where connectivity is not readily available, unit is suited for warehouses, tradeshow floors, conference rooms, computer training labs, or POS terminals. Box can be screw mounted to floor or wall, suspended over ceiling, or mounted on metallic surface using 2 optional magnets.

Ergodyne Corp.    St. Paul, MN 55108
Jun 18, 2010 Third party tested and certified to safety factor of 2, Squids® 3100 Black Tool Lanyard can tether both light and heavy tools, minimizing risk of serious injury and loss. Tubular nylon product features adjustable barrel lock, aluminum carabineer, and lock stitching to accommodate and secure most any tool. Lanyard is suitable for any job that requires working with tools at heights.

Corning Cable Systems    Hickory, NC 28603-0489
Apr 13, 2010 Because 100GBASE-SR10 Ethernet multimode fiber electronics utilize 24-fiber connector, dual 12-fiber MTP to 24-fiber MTP 100G Migration Patch Cord eliminates need for re-cabling in 100G-ready 12-fiber systems. ANSI/TIA-568-C.3-compliant unit features flexible round cable and Corning® ClearCurve® multimode fiber. Cord meets polarity requirements of IEEE 802.3ba, 40/100G Ethernet Standard, and connectors are FOCIS 5-compliant, ensuring compatibility with MT-based transceivers.

Switchcraft, Inc.    Chicago, IL 60630
Dec 29, 2009 Broadcast Series is comprised of 3-conductor ¼ in. Longframe audio patchcords suited for analog applications as well as digital AES/EBU audio and SMPTE time code patching. Made with low-capacitance 110 ohm cable, products come in 1-10 ft lengths, have flexible jacket available in 7 colors, and feature overmolded rubber flex handle-boot that reduces cable strain when pulled/tugged. Also, overmold covers metallic shell and minimizes crosstalk. Mil Spec Series, M642, is also available.

Autac, Inc.    North Branford, CT 06471
Feb 13, 2008 Featuring waterproof jackets, RoHS-compliant Thermoplastic Rubber (TPR) cords exhibit resistance to oils, chemicals, abrasion, and UV exposure. UL-Listed and CSA-Certified products are offered in 12, 24, 36, and 48 in. stock parts, which can extend on 1:5 ratio if needed. Variations for unique applications can also be designed and made to order.

C & M Corporation    Wauregan, CT 06387 0348
May 09, 2007 Featuring Duralon(TM) jacketing material, ruggedized coil cords are oil, chemical, abrasion, and UV resistant. They are suited for use in range of harsh environments, indlucing factories, outdoors, auto maintenance departments, and machine shops.

Southwire Co.    Carrollton, GA 30119
Jan 09, 2007 Suited for extreme operating environments, Viper(TM) Rubber Cords resist extreme heat, oil, chemicals, abrasion, and other hazards found in abusive settings. QuantumTPE(TM) Cords feature operating temperatures from -60 to 105°C and do not leave scuff marks on floors. Available with 300 and 600 V ratings, both families have sunlight resistant jackets rated for outdoor use and conductors rated for wet locations. Conductor sizes range from 2-18 AWG in most constructions.

3M    St. Paul, MN 55144
Jan 08, 2007 Available in 5, 10, and 20 ft lengths, Series 2300 features double-insulated jacket that helps cords withstand repeated flexing. Cords are part of personnel ground monitoring system designed to control personal ESD when used in conjunction with ESD workstation monitors. Models 2360, 2370, and 2371 feature straight plug design. Models with right angle plug include 2360R, 2370R, and 2371R with 3.0 mm dia plug tip, as well as 2391, 2392, and 2393 with 3.4 mm dia plug tip.

Whitney Blake Co.    Bellows Falls, VT 05101 0579
Nov 16, 2006 Available with various wire gauges and conductor counts, hi-flex coil cords are designed for applications requiring maximum extension life, sag-resistant coil memory and optimal flex performance. Quality of conductor materials, strand counts, primary jacket compounds, and shielding provide failure-free service in rugged environments. UL-listed and CSA-certified hi-flex cable, coil cords, and cable assemblies can be custom-designed to meet specific requirements.

AliMed, Inc.    Dedham, MA 02026
Aug 25, 2006 Designed to keep excess cord lengths neatly contained, Cable Capture helps eliminate potential tripping hazards and allows cords to be identified and removed or added if necessary. Full-sized unit can hold up to 8 ft of standard AC cord, while Cable Capture Jr. holds up to 6 ft of small-diameter cord. Units can be connected together to completely control, organize, and hide multiple cords and cables.

Electro Standards Laboratories    Cranston, RI 02921 3403
May 26, 2006 Available in variety of colors, CAT 6 Patch Cords are suited for distances up to 100 m. They consist of unshielded twisted pair cables with 4 pair, 24 AWG stranded conductors. Cables are terminated with RJ45 connectors in accordance with TIA/EIA 568B standards, and certified to 550 MHz. Offered in standard and custom lengths, patch cords are suited for 10Base-T, 100Base-T, 1000Base-T, Ethernet, and Gigabit Ethernet applications.

Siemon Co., The    Watertown, CT 06795
Apr 17, 2006 Consisting of BladePatch(TM) and MC® cords, 10 Gb/s capable 10G 6A(TM) UTP line of RJ45 patch cords feature 0.29 in. dia dual-jacket design with layered outer jacket configuration that provides protection from crosstalk noise or interference generated by nearby cables. They can be inserted and removed without need to depress external latch, and push-pull internal latching mechanism locks plug into position. Cords meet FCC68.500 and IEC 60603-7 specifications.

Whitney Blake Co.    Bellows Falls, VT 05101 0579
Jan 11, 2006 With extension length of 10-20 ft, medium-duty SJOW Coiled Stock Cords feature durable Neoprene jacket and are available in 12-18 AWG sizes. They are RoHS and WEEE compliant as well as UL-listed and CSA-certified. Able to withstand harsh conditions, cords are suited for heavy equipment, hoists, power controls, and power transmission.

Whitney Blake Co.    Bellows Falls, VT 05101 0579
Sep 20, 2005 Suited for wire and cable applications, Stock Cords are offered in light-, medium-, and heavy-duty styles. Ranging from 12-18 AWG, they feature Neoprene jacket, extension length of 10-20 ft, and retracted length of 2-4 ft. Light- and medium-duty cords are rated for max of 300 V, while heavy-duty units are rated up to 600 V. Applications include industrial and medical equipment, as well as instrumentation and testing devices.

Whitney Blake Co.    Bellows Falls, VT 05101 0579
Jun 02, 2005 Featuring double Neoprene jacket, Coiled Cords withstand harsh manufacturing environments. They offer extension length of 10–20 ft and are available in 12–18 AWG configurations. Light- and medium-duty cords reach max of 300 V, while heavy-duty cords handle up to 600 V. All are UL-listed and CSA-certified. Applications include automotive equipment, computers, bar code readers, material handling equipment, production line tools, and instrumentation and testing devices.

Whitney Blake Co.    Bellows Falls, VT 05101 0579
Dec 03, 2004 Pre-assembled Handset and Headset Assembly Cords feature polyurethane jacket and may be customized with appropriate contacts and connectors. Length and flexibility of cords gives user range of motion needed in demanding environments. Specific applications include radio telephone handsets, vehicle intercom systems, and mobile radio systems.