Rino Industries Ltd.
Chesterfield S41 9RN  United Kingdom
Dec 12, 2007 Designed for use mainly under high-duty, oil-lubricated conditions, DP4 series offers static and dynamic friction coefficient that lends to optimized wear resistance. Design also resists cavitation and flow erosion damage of polymer bearing surface by lubricant. While able to be used in sliding, oscillating, reciprocating, and rotating applications, products also work with non-lubricating fluids and in light-duty, unlubricated applications.

Ondrives Ltd.
Chesterfield, Derbyshire S41 9RN  United Kingdom
Oct 02, 2007 Load carrying capacity of Super Smart(TM) Ball Bushing(TM) results from combination of 4 hardened bearing-quality steel components. Steel outer ring lets bearing maintain its diametrical fit-up, even when installed in housing slightly out-of-round, and finished double track bearing plate features universal self-alignment. Along with precision-ground balls, products feature 60 Case LinearRace(TM) shaft (inner race), with under 4 mm roundness, 0.05 mm straightness, and 60-65 HRC hardness.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jul 02, 2007 Made of fire-rated plastic, AMP Connector Clamps secure and install nonmetallic sheathed cable to steel boxes or panels. Units accommodate 1 or 2 wires, are rated for 60 lb pull-out, and are available for ½ or ¾ in. knockout holes. Designed for plugging unused knockouts in boxes or panels, AMP Plugs fasten securely to any round open hole from ½-2 in. Offered in round or square, AMP Stud Bushings provide relief for wire pulling and prevent chaffing of wire insulation.

SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Oct 12, 2006 Providing protection for loads ranging from 4-350 lb, A10R 4- Finger-Flex Series exhibits various natural frequencies depending on size and durometer hardness of isolator, which ranges from 30-60. Sizes include 13/16, 1 11/64, 1 3/8, 1 29/32 and 3 in. diameters with ¼, 3/8, 3/8, 9/16, and 5/8 in. bores, respectively. Units provide noise suppression in typewriters, printers, copiers, and other precision office or lab equipment.

Axcell (Heyco Products, Inc.)
Toms River, NJ 08755
Jun 14, 2006 Featuring one-finger locking mechanism, Single-Panel-Thickness RDD Lockit(TM) fills electrical cord openings and provides strain relief against wire twisting and pulling for thin-walled furniture-mounted task-lighting units and other electrical products. Bushings, molded of high-impact polyamide nylon, conform to ASTM standard D-4066-PA111, have flammability classification of 94V-2, and withstand temperatures to 105°C.

International Distribution Alliance, Inc
Rockford, IL 61109
Apr 21, 2006 SMK Series inch and metric linear ball bushings have self-alignment feature that allows up to 0.5° variation. Interchangeable with standard dimensional ball bushings, options include pillow blocks, end supports, rail supports, and RC 60/440 SS shafting. Ball bushings are also available with corrosion resistant, washdown, FDA-approved coating for applications in food, beverage, pharmaceutical, and semiconductor industries.

THK America, Inc.
Schaumburg, IL 60173 5340
Apr 06, 2006 Interchangeable with conventional linear bushings, Power Linear Bush is engineered with cages made of synthetic resin that continually lubricates rolling elements. It exhibits smooth, quiet motion due to construction of ball retainer and outer sleeve. Convex shape of ball plate provides pivot point at center, allowing self-adjustment capability up to 0.5° that eliminates possibility of edge pressure caused by inaccurate machining, mounting errors, or shaft deflection.

Heyco Products
Toms River, NJ 08753
Mar 30, 2006 Designed for flat wires and cables ranging from 0.12 x 0.32 in. to 0.24 x 0.42 in., RDD Lockits(TM) fit into Double D holes, protecting current-carrying wires from twisting and other stresses that can cause electrical failure. Units and cord sub-assembly snap into place without any tools other than electrical pliers. Five-step locking mechanism allows range of panel thicknesses up to .157 in. and exceeds strain relief requirements of UL 35 lb pull test.

Zero-Max, Inc.
Minneapolis, MN 55441 5537
Jan 30, 2006 Providing frequent mounting/dismounting capabilities with one radial screw, ETP Express Bushings position and lock all types of gears, pulleys, sprockets, and other components in power transmission system. Units provide accurate mounting without axial movement of bushing along shaft and help provide runout control to minimize vibration and noise. Offered in full range of metric sizes, bushings offer concentricity to .001 in. TIR and are suited for tight areas.

SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Dec 07, 2005 Split square hole sleeve Series A 7C19 is suited for producing tooling such as milling cutters or boring bars without broaching equipment, while split square hole bushing Series A 7C18 fits any mating size collet or 3-jawed chuck. Sleeves are cold-rolled steel C1117 and range in length from ¾-5 in. Bushings are 4140 steel and hardened to Re 40-45. Broached square holes, which range from .128-1.260 in., accommodate 12 tool bit sizes from 1/8-1¼ in.

SDP/SI (Stock Drive Products/Sterling Inst)
New Hyde Park, NY 11042 5416
Dec 06, 2005 Splines, offered as carbon steel C-12L14 Series A 1C25 or stainless 416 annealed A 1Y25 Series, permit sliding between mating members in axial direction. Shafts contain 16 external spline teeth, and stock lengths of splined shafts range from 1-6 ft. Splined bushings contain 16 internal teeth and are offered as carbon steel A 1C26 Series or stainless 416 annealed A1Y26 Series. Bushing ODs range from .625 in. to 1.500 in., and bushing lengths range from .40-1.5 in.

Richco, Inc.
Chicago, IL 60680
Aug 24, 2005 SC Snub Bushing series protects cable bundles from rough panel edges and provides light strain relief. With flexible inside diameter, users can slide cable into grommet and press part into mounting hole. Interior diameter material closes firmly against cable. Parts accommodate 1/32, 1/16, 3/32, and 1/8 in. panel thicknesses. Available in 3 sizes of cable holding diameters from 1/8–¼ in., parts come in black, RoHS-compliant, nylon 6/6 material.

John Deere Harvester Works / Cylinder Division
Moline, IL 61265
Jun 21, 2005 Intended for dozer undercarriages, SC-2 coating combines wear-resistant and corrosion-resistant properties. Extended-Life Undercarriage, featuring coated bushings uses GOPALITEâ„¢ process, which produces water-based slurry from heavy alloy-metal powder and several organic additives. Slurry formula suspends alloy powder and is used to apply coating to part surface, producing coating that is uniform in thickness and consistency.

EPCO
Fremont, OH 43420
May 06, 2005 Made of 660 bronze, Split Movable Platen Bushings enable replacement of machine’s platen bushings without requiring removal of tie bonds. This helps prevent machine problems cause by worn platen bushings, such as sagging, lubrication problems, clamp ram packing leaking, and platens out of parallelism. Included weld rings come drilled, tapped, and assembled.

Heyco Products
Toms River, NJ 08753
Apr 07, 2005 Lay-In Lockitâ„¢ Bushings are suited for electrical housings, cabinets, and motor or pump chassis with split housing or slot-style power entry points. Units convert raw-edged electrical enclosure holes to smooth-edged, debris-proof insulated holes. They accommodate round or flat, individual or bundled cable with diameters up to .600 in., and self-lock onto cables without tools. Made from Type 6/6 nylon, bushings withstand temperatures to 125°C.

Micro Plastics, Inc.
Flippin, AR 72634
Mar 01, 2005 Standard Insulating Bushings meet UL and Canadian Standards Association temperature and pull-out tests. Units are available to fit ¼â€“2 in. hole sizes with various inside diameter openings. Multiple locks positively snap in panels ranging from 1/32–1/8 in. in thickness.

J. W. Winco, Inc.
New Berlin, WI 53151
Nov 09, 2004 Suitable for holding, positioning, and clamping of workpieces, Side Thrust Pins feature knurled aluminum body that requires hole tolerance of H8. Available in light, standard, or heavy-duty end pressures, pins are zinc-plated hardened steel or Delrin plastic. Versions with NBR/perbunan rubber seal are gold-passivated and those without seal are silver-passivated. Made of steel with black oxide finish, Eccentric Bushings facilitate adjustment of side thrust pins.

Zero-Max, Inc.
Minneapolis, MN 55441 5537
Jul 21, 2004 Posi-Lok® bushings enable solid connection between shaft and mounted devices, providing keyless option for locking into position gears, pulleys, sprockets, and other components in mechanical system. Protected against corrosion, products feature socket-head cap screws that, when tightened, allow inner and outer hub to move along mutual contact surfaces. Bushings handle torque from 52–5,576 lb-in. and are available in bore sizes from ¼â€“1 in. and 6–35 mm.

Ringfeder Corporation
Westwood, NJ 07675
Mar 25, 2004 RING-lok™ keyless taper bushing system eliminates backlash by combining features of keyless locking device and steel taper bushing system into single unit. It is not influenced by reversing loads and will not vibrate loose. Suited for cast iron and steel hubs, product is used on V-belt and timing pulleys, couplings, and sprockets. Bushing sizes include 1108, 1210, 1610, 2012, 2517, and 3020 with inch sizes available on request for shaft diameters from .886–2.76 in.

Heyco Products
Toms River, NJ 08753
Mar 24, 2004 Round Double D Lockit™ series includes Models RDD101A, RDD401, and RDD501 to cover cables ranging from 0.125–0.600 in. in dia and accommodate various UL cable-type designations. With double flat sides, products fit into standard round or double-D holes to provide strain relief against twisting, pulling, cord pulsing, or gravity. Bushings have proprietary 5-step locking mechanism that accommodates chassis thicknesses to .125 in. and are available in 8 UL designation categories.