Anchor Fasteners

Fasteners & Hardware

Cintec America Provides Anchoring Systems for NYC MTA Subway Station Retrofit Project

November 25, 2016

Anchoring System for Overhead GFRC Panels for Subway Station Retrofit

New York City Transit managers had learned in 1999 that a portion of the ceiling at 181st Street was at risk of collapse. However, it did not begin a comprehensive assessment of the ceiling’s condition until June 2009. On August 16, 2009, at 10:18 p.m., a large section of the arched brick ceiling at the 181st...Read More

Fasteners & Hardware

Cintec Technology Aids in Restoration of Award-Winning 12th Century Castle

November 25, 2016

Restored Astley Castle recipient of prestigious Riba Stirling Prize for Architecture

CINTEC International, a world leader in the field of structural masonry retrofit strengthening, repair, and preservation, announces that its patented anchors were used in the restoration of Astley Castle in Warwickshire. Following its renovations, Astley Castle was awarded the prestigious Riba Stirling...Read More

Fasteners & Hardware, Safety & Security Equipment

Road Ranger Mobile Anchor features fall arrest system.

November 19, 2016

Engineered with steel and aluminum combination, Road Ranger Mobile Anchor offers superior strength to weight ratio and covers 18 to 22 feet height. Providing battery driven set-up, compact design and single plane erection, unit permits 30 degree work angle in all directions with 310 pounds weight capacity. Featuring 900 pounds of maximum arresting force, anchor is suitable for use in tight spaces, railroad cars, aircraft, and industrial equipment.

Read More

Fasteners & Hardware

Historic Chimney in Baku Will Be at the Heart of a New Shopping Complex Thanks to the Innovation of Newport Firm Cintec

August 26, 2015

Cintec International is ensuring that a historic industrial chimney will be at the heart of The Twin Towers Port of Baku scheme. A demolition-threatened historic chimney in the Azerbaijan capital of Baku will now be the centre point of a multi-million pound new shopping complex thanks to the innovation of a Newport-based structural engineering firm. Cintec International has been...Read More

Fasteners & Hardware, Services

CINTEC America Provides Anchoring Systems for NYC MTA Subway Station Retrofit Project

May 5, 2015

Anchoring System for Overhead GFRC Panels for Subway Station Retrofit CINTEC America, a world leader in the field of structural masonry retrofit strengthening, repair, and preservation, announces that after extensive site testing and evaluation it will supply a new anchoring system for the overhead glass fiber reinforced concrete (GFRC) panels for the NYC MTA subway station retrofit project...Read More

Fasteners & Hardware

CINTEC Technology Aids in Restoration of Award-Winning 12th Century Castle

March 25, 2015

Restored Astley Castle recipient of prestigious Riba Stirling Prize for Architecture CINTEC International, a world leader in the field of structural masonry retrofit strengthening, repair, and preservation, announces that its patented anchors were used in the restoration of Astley Castle in Warwickshire. Following its renovations, Astley Castle was awarded the prestigious Riba Stirling Prize...Read More

Fasteners & Hardware

Dissipative Anchor protects buildings from seismic activity.

March 5, 2015

Designed for use with Cintec wall anchor system, dissipative wall anchor allows controlled and repairable drift for walls to manage amount of seismic energy fed into structure and thereby minimize damage to building. Product consists of stainless steel plates to which 4 bolts apply pressure, creating friction to adjustable degree. Built-in stops restrict sliding motion, and connectors link to Cintec standard anchor rods. Product may be used in areas of high seismic activity. Read More

Architectural and Civil Engineering Products, Fasteners & Hardware

CINTEC Announces Anchoring System to Be Used for Structural Stabilization of Historic Church

February 10, 2014

CINTEC America Inc. of Baltimore, Maryland, a world leader in the field of structural masonry retrofit strengthening, repair, and preservation, announces that its anchoring solution for masonry structures has been selected to repair the two towers of the historic First Lutheran Church of the Reformation of New Britain, Connecticut. The award-winning patented CINTEC Anchor System process...Read More

Fasteners & Hardware, Mounting & Attaching Products

Hardware Pack aids installation of shutter tiebacks.

May 6, 2013

Shutter Dog Value Pack combines scroll shutter dogs with lag screws and everything else needed for installation on pair of shutters. Shutter dogs are heavy cast iron for classic, three-dimensional look and are finished with multi-step WeatherWright™ coating system. Included masonry anchors allow mounting in nearly any building material. Shutter dog holder, using rare-earth magnets to secure dogs tightly to shutter, minimizes potential rattling in windy conditions. Read More

Fasteners & Hardware, Health, Medical and Dental Supplies & Equipment, Materials & Material Processing

MedShape's Novel Orthopedic Implants are Made of Solvay's Zeniva PEEK

March 28, 2013

Suture Anchor and Soft Tissue Fastener Feature Unique Shape Memory Technology ALPHARETTA, Ga. – MedShape Inc., a leading supplier of orthopedic implants featuring patented shape memory technology, has designed and manufactured the Morphix Suture Anchor for tendon and ligament repair and the ExoShape Soft Tissue Fastener for knee joint ACL reconstruction using Zeniva polyetheretherketone...Read More

Architectural and Civil Engineering Products, Fasteners & Hardware, Safety & Security Equipment, Services

Diversified Fall Protection to Demonstrate Rooftop Safety Systems at International Roofing Expo 2013

January 31, 2013

CLEVELAND, OH- Diversified Fall Protection will exhibit in booth 1789 at the International Roofing Expo, held in San Antonio, Texas from February 5-7. DFP applications engineers will demonstrate a variety of OSHA compliant horizontal lifeline anchorage systems for rubber membrane, concrete, and standing seam metal roofs that limit penetration and leak potential without compromising the...Read More

Construction Equipment & Supplies, Fasteners & Hardware, HVAC

Duro-Last Adds Three New Products to Its Accessories Line

November 20, 2012

SAGINAW, MICHIGAN - Duro-Last Roofing, Inc. is pleased to announce the availability of three new accessories to our product line: oval membrane plates, Tubos and non- penetrating anchors which are offered in two different sizes. All three products provide more options for authorized Duro-Last contractors to install a complete roofing system. The oval membrane plates are used to mechanically...Read More

Architectural and Civil Engineering Products, Fasteners & Hardware, Mechanical Components & Assemblies

Attachment System supports solar panel racking installations.

November 12, 2012

Providing ballast-free, non-penetrating roof membrane attachment of solar module racking systems, U-Anchor 2000™ consists of weatherized steel plate with 3/8 x ¾ in. tall stainless steel stud, which has been heat fused to 16 x 16 in. thermoplastic target. Unit installs without fasteners and can perform in conditions that exceed hurricane winds. With ultimate load capacity of 1,000 lb, U-Anchor 2000 can be welded to any thermoplastic surface, from flat to vertical, with hot air welder. Read More

Fasteners & Hardware, Non-Industrial Products

ParknPool Offers Ways to Ensure Bleachers Are Safe from Thieves

March 28, 2012

With bleacher thefts on the rise, internet based retailer ParknPool is doing everything they can to ensure clients can secure bleachers to the ground, making it harder for thieves to make off with them, while also offering replacement bleachers when entire units are stolen. Non-Elevated Bleachers Lexington, VA - Within a period of two days in early February, brazen thieves stole bleachers...Read More

Construction Equipment & Supplies, Fasteners & Hardware

Cintec North America Offers Masonry Repair and Reinforcement Anchor System

October 13, 2011

CINTEC North America, a world leader in the field of structural masonry retrofit strengthening, repair, and preservation, offers the CINTEC Reinforcing Anchor System, a micro cement anchoring and reinforcing technique. The system is used for repair and renovation of existing buildings. The award-winning Anchor System process begins with an inspection of the structure by a qualified CINTEC...Read More

Architectural and Civil Engineering Products, Fasteners & Hardware, Services

Cintec North America Offers Masonry Repair and Reinforcement Anchor System

June 21, 2011

CINTEC North America, a world leader in the field of structural masonry retrofit strengthening, repair, and preservation, offers the CINTEC Reinforcing Anchor System, a micro cement anchoring and reinforcing technique. The system is used for repair and renovation of existing buildings. The award-winning Anchor System process begins with an inspection of the structure by a qualified CINTEC...Read More

Construction Equipment & Supplies, Fasteners & Hardware

Cintec Protects People and Property Against Deadly Earthquakes

March 23, 2011

Cintec North America, a world leader in the field of structural masonry retrofit strengthening, repair, and preservation, offers solutions to protect people and property against earthquakes. Seistec, a CINTEC Reinforcing Anchor System, is used for seismic repair or for retrofitting seismic upgrading of structures made of brick, stone, terracotta, adobe, or even timber. Seistec internally...Read More

Fasteners & Hardware, Services

CINTEC Secures Contract to Preserve Government Building in Canada

February 28, 2011

Contract demonstrates the versatility of CINTEC's anchoring system CINTEC Worldwide, a world leader in the field of structural masonry retrofit strengthening, repair, and preservation, is pleased to announce winning a three-year contract to strengthen the faade of the Confederation Building, which overlooks St. John's in Newfoundland, Canada. This follows a contract to help preserve the world's...Read More

Fasteners & Hardware, Safety & Security Equipment

Roof Anchor Post offers permanent or temporary safety solution.

September 20, 2010

Adaptable to standing seam, membrane, metal sheathing, concrete, and wood roof designs, Miller Fusion Roof Anchor Post protects worker by maintaining secure connection to structure in event of fall. Single-point anchor does not require roof penetration to sub-surface rafters or trusses. To withstand changing outdoor environment, unit has stainless steel internal components. Steel post and base are zinc-plated and powder coated for 2 layers of protection. Read More

Fasteners & Hardware, Safety & Security Equipment

Hy-Safe Technology Offers Fail-Safe and Foolproof Vacuum Anchor by Capital Safety

August 30, 2010

Portable lightweight system decreases downtime and effort, and increases productivity without compromising safety. With a Vacuum Anchor System at your workers' side, they can anchor to virtually any smooth, non-porous surface. By eliminating the need to drill or weld, the Vacuum Anchor System can decrease downtime and effort, and increase productivity. The Vacuum Anchor System gives workers all...Read More