Fasteners & Hardware

Fasteners & Hardware

Captive Panel Screws feature self-clinching design.

Jan 29, 2015

Offering alternative to spring-loaded versions, PEM® Type PFHV™ Screws are no-spring steel fasteners integrating captive screw to eliminate potential risk for damage to internal components associated with unsecured hardware. Screws are engineered for use with aluminum or steel sheets as thin as .036 in. and exhibiting hardness of HRB 60 or less on Rockwell B Scale or HB 107 or less on... Read More

Fasteners & Hardware

Stainless Steel Hand Knobs come in inch and metric sizes.

Jan 28, 2015

Made of cast stainless steel, American Standard No. CF-8, with matte, shot-blast finish, DIN 6336-NI Hand Knobs are available blank, with threaded blind bores, or with tapped through bores. Inch size threads range from 1/4-20 to 1/2-13, while with metric threads range from M6 x 1.0 to M12 x 1.75. Special inch or metric bores, threads, and drilled and pinned threaded studs are available upon... Read More

Fasteners & Hardware

Application Spotlight: Welker Expanding Locating Pin

Jan 28, 2015

When presented with an application challenge from a major Midwest agricultural manufacturer, Welker went right to work to create a solution.  The problem: how to accurately and repeatably locate critical parts using gage holes having a +/- 0.25mm tolerance.  The solution: an expanding locating pin.  The Welker expanding pin has fingers that are located below the surface of the pin. When... Read More

Fasteners & Hardware, Material Handling & Storage

Indexable Insert Cartridges enhance face milling operations.

Jan 26, 2015

Offered in 2 geometries, FR751M and FR752M make performance of tangential indexable inserts available for adjustable face milling. Walter BLAXX shoulder mill, which produces precise, near step-free 90° shoulders, is available for tool diameters up to 6.30 in. When F2010 face mill is equipped with FR751M or FR752M cartridge, this technology can be applied up to diameters of 12.40 in.... Read More

Fasteners & Hardware, Machinery & Machining Tools

Micro-Sized Lead Screws can be customized to application.

Jan 26, 2015

Available through Haydon Kerk Express web store, Kerk® Micro Series is suitable for applications that require precise motion control in compact package. Custom screw materials, such as heat-treated 400 series stainless steel, are available, while custom nut materials, including PEEK and PPS, can be used to meet specific requirements. Applications include surgical and medical instruments,... Read More

Display & Presentation Equipment, Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage

Count On Tools Inc. to Introduce New StripFeeder Mini at the IPC APEX EXPO

Jan 21, 2015

GAINESVILLE, GA - Count On Tools Inc. (COT), a leading provider of precision components and SMT spare parts, will exhibit in Booth #3625 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center in California. COT will debut the new StripFeeder Mini that features the same award-winning design of the StripFeeder in a smaller package (134mm x 152mm). The... Read More

Electrical Equipment & Systems, Fasteners & Hardware

Cable Bushing maximizes wire density.

Jan 20, 2015

With SKINTOP CUBE MULTI, up to 23 electrical cables or pneumatic lines can pass directly through enclosure wall. System places rigid, glass-reinforced nylon frame into standard-sized cutout in wall. Polycarbonate insert inside rectangular frame has gel-filled holes, which allow cables to be inserted while creating seal and providing strain relief. Available in 2 versions, CUBE MULTI  covers... Read More

Fasteners & Hardware

PCB Magazine Rack Stop Clip accelerates identification.

Jan 14, 2015

Installed on PCB magazine rack, single- and double-lane ezCLIP lets electronics manufacturers who manually load/unload racks distinguish required spacing between boards and prevent damage on boards with taller components. Design fosters accelerated identification of card guides that should be skipped as they prevent boards from being inserted. This hastens setup times for production runs as... Read More

Fasteners & Hardware

Coil Hard Hat Lanyards come with buckle or clamp.

Jan 12, 2015

By securing hard hat to worker, Squids® 3157 and 3158 prevent hard hat from falling at heights. Coil design minimizes lanyard length, preventing snag and tangle hazards while keeping lanyard away from worker's face. Squids 3158 utilizes easy release clamp that securely attaches to just about anything, while Squids 3157 houses double lock plastic buckle designed to connect to fall... Read More

Fasteners & Hardware

Self-Clinching Nuts facilitate mating-hole alignment.

Jan 08, 2015

PEM® floating self-clinching nuts, which include non-locking Type A4 nuts with free running load-bearing threads as well as self-locking Type LA4 nuts with prevailing torque locking threads, install in stainless sheets as thin as .038 in. and greater with Rockwell B hardness of HRB 88 or less. Design permits up to .015 in. min float in all directions from center, and ability of... Read More

Fasteners & Hardware

Collet Nut works with through-coolant tools.

Dec 26, 2014

Designed for larger ER 50 tools, Hi-Q/ERC 50 can replace standard ER 50 non-coolant nuts in applications where coolant through is possible. Nut will use DS/ER 50 coolant disks for tools larger than 25.5 mm, and can also utilize special adapter, allowing use of ER 40 coolant and flush type disks for smaller diameters. Adapter reduces number of disks required specifically for ER 50 applications. Read More

Fasteners & Hardware

Micro Lead Screws allow miniaturization of products.

Dec 23, 2014

Available in 2 mm diameter screw sizes with leads ranging from 0.3–2 mm per revolution, Kerk® Micro Series Lead Screw Assemblies come in variety of nut configurations made of self-lubricating acetal and Kerkite® High Performance Composite Polymers, including nylon, PPS, and PEEK materials. Assemblies are manufactured of 303 stainless steel and require no maintenance. High accuracy threads... Read More

Fasteners & Hardware, Plant Furnishings & Accessories

Electronic Rotary Latch can accommodate door sensing.

Dec 19, 2014

Combining rotary latch mechanism with DC motor actuation, R4-EM 8 Series comes with or without extended housing option to accommodate door sensing and to provide added protection of locking cam. Additionally, latch is available with integrated connector and mechanical override bracket, and features concealed 2-hole installation. Unit enables simplified electronic locking and monitoring for... Read More

Fasteners & Hardware, Mounting & Attaching Products

Steel and Stainless Steel Hinges mount from inside door.

Dec 19, 2014

Available in metric sizes, GN 129.2 Steel and Stainless Steel Hinges are used for doors that are flush with frame on outside. Once assembled, they cannot be unhinged. Being mounted from inside, hinges are especially suitable for doors and trap doors that must not be detachable from outside as anti-tamper device. Hinges are available in steel, with zinc-plated, blue passivated finish; American... Read More

Architectural and Civil Engineering Products, Fasteners & Hardware

USG® Recommends Grabber® Fasteners for Use with Its Structo-Crete(TM) Concrete Panels

Dec 15, 2014

Highland, UT—Three concrete panel screws manufactured by Grabber® Construction Products, Inc. ("Grabber"), a 100% employee-owned international distributor of professional-grade fasteners and construction products, have been named by USG® as the fasteners of choice for use with USG's Structo-Crete™ concrete panels. USG tested for fastening Structo-Crete™ structural concrete panel... Read More

Fasteners & Hardware

Miniature Clamping Nut offers features that prevent slippage.

Dec 11, 2014

Available in ER 16 and ER 20 sizes for Swiss automatic machine tool applications, standard and coolant versions of Hi-Q®/ERMX Mini-Nut feature anti-slip locking design that prevents locking wrench from slippage during assembly/disassembly. Milled slots on nut OD that mate with corresponding features of wrench promote operator safety while also helping to prevent damage to other tools. Surface... Read More

Cleaning Products & Equipment, Fasteners & Hardware, Transportation Industry Products

InterClean Equipment of Ypsilanti, Michigan has Recently Commissioned the Newly Developed Rainbow Ultima Wash System

Dec 10, 2014

YPSILANTI, Mich.,  -- InterClean Equipment of Ypsilanti, Michigan has recently commissioned the newly developed Rainbow Ultima Wash System for Heidelberg Distributing Company in Cincinnati, OH.  The Rainbow Ultima, first produced in the 1970's and now launched in North-America, is a "Roll Over" / "Gantry" type portal machine which has the most advanced control system and produces... Read More

Fasteners & Hardware

Revolving Knobs substitute for revolving handles.

Dec 09, 2014

Able to be used in place of revolving handles, long shoulder type GN 319.5 Revolving Ball Knobs with 303 stainless steel tapped shoulder (matte shot-blasted finish) come in inch and metric sizes. Tapped shoulder allows revolving ball knob to be mounted from underside via screw or bolt, which can then be mounted to sheet metal of various thicknesses, flat bar, or castings to create cranking or... Read More

Fasteners & Hardware

Self-Clinching Nuts and Studs work with hard sheet materials.

Dec 08, 2014

PEM® self-clinching nuts and studs, which include SH™ hard panel nuts and HFLH™ hard panel studs, are designed for permanent installation into hard sheet materials and suit automotive component attachment applications. Manufactured from hardened alloy steel, products enable close-to-edge mounting without risking panel buckling, eliminate need for embossing operations, and can be... Read More

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage

REGO-FIX® to Highlight Toolholding Advancements at HOUSTEX 2015

Dec 03, 2014

INDIANAPOLIS, Ind. – At HOUSTEX 2015, REGO-FIX will join its distributor partner, Robert H. Severance Group, Inc., who is occupying several booths throughout the show, to showcase its newest innovations in toolholding. On display will be a new version of the secuRgrip® anti-pullout toolholding system that can be used in any ER collet system and the Hi-Q®/ERMX Mini-Nut for Swiss... Read More