Fasteners & Hardware

Fasteners & Hardware

PCB Magazine Rack Stop Clip accelerates identification.

January 14, 2015

Installed on PCB magazine rack, single- and double-lane ezCLIP lets electronics manufacturers who manually load/unload racks distinguish required spacing between boards and prevent damage on boards with taller components. Design fosters accelerated identification of card guides that should be skipped as they prevent boards from being inserted. This hastens setup times for production runs as... Read More

Fasteners & Hardware

Coil Hard Hat Lanyards come with buckle or clamp.

January 12, 2015

By securing hard hat to worker, Squids® 3157 and 3158 prevent hard hat from falling at heights. Coil design minimizes lanyard length, preventing snag and tangle hazards while keeping lanyard away from worker's face. Squids 3158 utilizes easy release clamp that securely attaches to just about anything, while Squids 3157 houses double lock plastic buckle designed to connect to fall... Read More

Fasteners & Hardware

Self-Clinching Nuts facilitate mating-hole alignment.

January 8, 2015

PEM® floating self-clinching nuts, which include non-locking Type A4 nuts with free running load-bearing threads as well as self-locking Type LA4 nuts with prevailing torque locking threads, install in stainless sheets as thin as .038 in. and greater with Rockwell B hardness of HRB 88 or less. Design permits up to .015 in. min float in all directions from center, and ability of... Read More

Fasteners & Hardware

Collet Nut works with through-coolant tools.

December 26, 2014

Designed for larger ER 50 tools, Hi-Q/ERC 50 can replace standard ER 50 non-coolant nuts in applications where coolant through is possible. Nut will use DS/ER 50 coolant disks for tools larger than 25.5 mm, and can also utilize special adapter, allowing use of ER 40 coolant and flush type disks for smaller diameters. Adapter reduces number of disks required specifically for ER 50 applications. Read More

Fasteners & Hardware

Micro Lead Screws allow miniaturization of products.

December 23, 2014

Available in 2 mm diameter screw sizes with leads ranging from 0.3–2 mm per revolution, Kerk® Micro Series Lead Screw Assemblies come in variety of nut configurations made of self-lubricating acetal and Kerkite® High Performance Composite Polymers, including nylon, PPS, and PEEK materials. Assemblies are manufactured of 303 stainless steel and require no maintenance. High accuracy threads... Read More

Fasteners & Hardware, Plant Furnishings & Accessories

Electronic Rotary Latch can accommodate door sensing.

December 19, 2014

Combining rotary latch mechanism with DC motor actuation, R4-EM 8 Series comes with or without extended housing option to accommodate door sensing and to provide added protection of locking cam. Additionally, latch is available with integrated connector and mechanical override bracket, and features concealed 2-hole installation. Unit enables simplified electronic locking and monitoring for... Read More

Fasteners & Hardware, Mounting & Attaching Products

Steel and Stainless Steel Hinges mount from inside door.

December 19, 2014

Available in metric sizes, GN 129.2 Steel and Stainless Steel Hinges are used for doors that are flush with frame on outside. Once assembled, they cannot be unhinged. Being mounted from inside, hinges are especially suitable for doors and trap doors that must not be detachable from outside as anti-tamper device. Hinges are available in steel, with zinc-plated, blue passivated finish; American... Read More

Architectural and Civil Engineering Products, Fasteners & Hardware

USG® Recommends Grabber® Fasteners for Use with Its Structo-Crete(TM) Concrete Panels

December 15, 2014

Highland, UT—Three concrete panel screws manufactured by Grabber® Construction Products, Inc. ("Grabber"), a 100% employee-owned international distributor of professional-grade fasteners and construction products, have been named by USG® as the fasteners of choice for use with USG's Structo-Crete™ concrete panels. USG tested for fastening Structo-Crete™ structural concrete panel... Read More

Fasteners & Hardware

Miniature Clamping Nut offers features that prevent slippage.

December 11, 2014

Available in ER 16 and ER 20 sizes for Swiss automatic machine tool applications, standard and coolant versions of Hi-Q®/ERMX Mini-Nut feature anti-slip locking design that prevents locking wrench from slippage during assembly/disassembly. Milled slots on nut OD that mate with corresponding features of wrench promote operator safety while also helping to prevent damage to other tools. Surface... Read More

Cleaning Products & Equipment, Fasteners & Hardware, Transportation Industry Products

InterClean Equipment of Ypsilanti, Michigan has Recently Commissioned the Newly Developed Rainbow Ultima Wash System

December 10, 2014

YPSILANTI, Mich.,  -- InterClean Equipment of Ypsilanti, Michigan has recently commissioned the newly developed Rainbow Ultima Wash System for Heidelberg Distributing Company in Cincinnati, OH.  The Rainbow Ultima, first produced in the 1970's and now launched in North-America, is a "Roll Over" / "Gantry" type portal machine which has the most advanced control system and produces... Read More

Fasteners & Hardware

Revolving Knobs substitute for revolving handles.

December 9, 2014

Able to be used in place of revolving handles, long shoulder type GN 319.5 Revolving Ball Knobs with 303 stainless steel tapped shoulder (matte shot-blasted finish) come in inch and metric sizes. Tapped shoulder allows revolving ball knob to be mounted from underside via screw or bolt, which can then be mounted to sheet metal of various thicknesses, flat bar, or castings to create cranking or... Read More

Fasteners & Hardware

Self-Clinching Nuts and Studs work with hard sheet materials.

December 8, 2014

PEM® self-clinching nuts and studs, which include SH™ hard panel nuts and HFLH™ hard panel studs, are designed for permanent installation into hard sheet materials and suit automotive component attachment applications. Manufactured from hardened alloy steel, products enable close-to-edge mounting without risking panel buckling, eliminate need for embossing operations, and can be... Read More

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage

REGO-FIX® to Highlight Toolholding Advancements at HOUSTEX 2015

December 3, 2014

INDIANAPOLIS, Ind. – At HOUSTEX 2015, REGO-FIX will join its distributor partner, Robert H. Severance Group, Inc., who is occupying several booths throughout the show, to showcase its newest innovations in toolholding. On display will be a new version of the secuRgrip® anti-pullout toolholding system that can be used in any ER collet system and the Hi-Q®/ERMX Mini-Nut for Swiss... Read More

Fasteners & Hardware, Welding Equipment & Supplies

MIG Welding Consumables Platform keeps contact tips cooler.

December 2, 2014

Extending consumable parts life, Velocity™ platform features contact tips with shielding gas ports that keep tip 30% cooler. Gas porting in contact tip, coupled with all-copper conductive path with fewer connections, promotes electrical and thermal conductivity, while running temperature of contact tip reduces ability for spatter to stick. Thread-less, drop-in contact tips can be... Read More

Fasteners & Hardware

Self-Clinching Fasteners offer removability feature.

November 26, 2014

While microPEM® TackScrew™ fasteners integrate self-clinching technology for permanent sheet-to-sheet attachment in compact electronics applications, included thread-like feature allows removal when necessary and one-time reinstalled if desired. These hardened stainless steel fasteners, which can also replace micro screws, hold top sheets as thin as .008 in. and base panels that... Read More

Fasteners & Hardware, Mounting & Attaching Products

Ball Shaped Door Catches come in metric sizes.

November 25, 2014

Designed for shutter doors and sliding doors, RoHS-compliant EN 450 Ball Shaped Door Catches consist of catch body that is fixed to frame and ball that is fixed to door. Catch body is technopolymer plastic, Polyacetal POM, matte black, and ball is glass fiber reinforced plastic, matte black. Under specific tests, catch showed constant performances for more than 20,000 cycles. Also... Read More

Fasteners & Hardware

Threadless Cable Gland assembles without tools.

November 24, 2014

Designed to relieve stress and strain on cables, HELUTOP Easy uses patented spring/snap system, allowing for installation in hard-to-reach areas and spaces with no access for lockouts. To assemble, user pushes cable gland in and turns clockwise by hand. Made of plastic and available in sizes Ø16 and Ø20, unit fits as tightly as traditional glands held in place with threaded hole or... Read More

Fasteners & Hardware, Machinery & Machining Tools

Seco Brings Comprehensive Cutting Tool Innovations to TECMA 2015

November 21, 2014

TROY, Mich. — At TECMA 2015, Seco Tools, LLC will showcase numerous cutting tool innovations that bring enhanced productivity and value to a variety of metalworking operations. Visitors to Seco stand 848 at the Expo Bancomer Santa Fé in Mexico City, March 3-6 will discover several new milling cutters, as well as the latest turning and threading solutions.  Square Shoulder Milling At the... Read More

Fasteners & Hardware, Safety & Security Equipment, Sensors Monitors & Transducers

Kwikset Announces Smartcode Lock Compatibility with Logitech's Harmony Living Home Lineup

November 18, 2014

LAKE FOREST, CA – Kwikset, the leader in residential security, announces that its line of SmartCode™ locks will be a part of Logitech's new Harmony Living Home lineup of entertainment and home automation devices. Logitech's Harmony® Living Home brings together a wide array of compatible brands, such as Kwikset™, Honeywell®, Lutron®, Sylvania® and many others, to create... Read More

Fasteners & Hardware

Innovation, Collaboration Drive Success of Thermoplastic Thrust Washer Component from Freudenberg-NOK, Solvay

November 14, 2014

Society of Plastics Engineers honors powertrain project developed for General Motors PLYMOUTH, Mich. – An unwavering focus on new technology, industrial partnerships and customer service has resulted in development of a unique component from Freudenberg-NOK Sealing Technologies (Freudenberg-NOK) and Solvay Specialty Polymers that helps enable production of General Motors' Hydra-Matic... Read More