Fasteners & Hardware

Fasteners & Hardware, Mounting & Attaching Products

Torque Insert features position-control technology.

March 31, 2015

Featuring 5 mm wide housing and overall single-fin profile, Model TI-C5M is suited for consumer electronics applications. Unit offers symmetric torque ranges from 1.3–2.66 lb-in. and is engineered for press-fit mounting into metal or plastic materials. Delivering full 360° range of rotation with minimal freeplay, insert can perform for fully qualified service life of 30,000 cycles. Unit is... Read More

Fasteners & Hardware, Mounting & Attaching Products

Strain Relief is designed for Amphenol AT-SR01 Series Connectors.

March 31, 2015

Providing bend relief, Multi-Flex strain relief for Amphenol AT-SR01 Series connectors features injection-molded, low-durometer material over existing shrink tube lip. This provides aesthetic compliment to cables and harnesses while promoting cable assembly life by limiting bend radius. Construction characteristics promote longevity for field, off-road, and under-hood applications. Read More

Fasteners & Hardware

Adhesive-Backed Nylon Supports lock-fit chassis to PCB.

March 31, 2015

Engineered to lock-fit chassis-to-board without use of tools, Nylon Stacking Spacers/Supports have adhesive backing for securing to chassis while other end snaps into PCB with strong, retentive grip. Units are available in sturdy mount or slim line design to accommodate variety of requirements. Supplied in heights from .187–.825 in., supports are constructed of one-piece, flame-resistant... Read More

Architectural and Civil Engineering Products, Fasteners & Hardware

Z-Wave Garage Door Controller helps keep buildings secure.

March 27, 2015

Available for residences or businesses, Z-GD00Z-4 installs to current automatic garage door opener and connects to Z-Wave Controller or network to enable wireless control – including current garage door position. System knows if door is open or closed, which negates accidental openings, and can work in conjunction with other Z-wave lights, locks, and thermostats. Wireless control over... Read More

Fasteners & Hardware

CINTEC Technology Aids in Restoration of Award-Winning 12th Century Castle

March 25, 2015

Restored Astley Castle recipient of prestigious Riba Stirling Prize for Architecture CINTEC International, a world leader in the field of structural masonry retrofit strengthening, repair, and preservation, announces that its patented anchors were used in the restoration of Astley Castle in Warwickshire. Following its renovations, Astley Castle was awarded the prestigious Riba Stirling Prize for... Read More

Fasteners & Hardware, Health, Medical, & Dental Supplies and Equipment

Induction Seals offer low peel force for convenience.

March 20, 2015

With tamper-evident design, EdgePull™ Induction Seals provide food, beverage, pharmaceutical, nutraceutical, health/beauty aids, and personal care products with protection and easy-opening functionality. Seals peel cleanly so no adhesive residue/strings contaminate contents after opening. Typically used with closures ranging from 28–63 mm, seals have pull tab designed to resist delamination... Read More

Fasteners & Hardware

Retracting Locating Pin features 2 kg slide hammer piston.

March 19, 2015

Operating without maintenance, Bull Pin has 2 kg slide hammer piston with rap action that delivers concentrated pulling power in frame line applications. High-load PTFE composite bearing provides lube-free working load capacity, while dual urethane scraper keeps weld spatter out. Always fully engaged, chrome plated shaft offers long precision life. Anti-rotate pin mount allows mounting of 2-way... Read More

Fasteners & Hardware

Securitech Makes Schools Safer with Unique One-Press Classroom Deadbolt

March 17, 2015

New QID Deadbolt Lock is the Fastest Safe Haven Solution Maspeth, NY — Securitech, the industry leader for innovative, purpose-driven locking devices, is making classroom security faster, easier and stronger with its QID (Quick Intruder Deadbolt) classroom lock, on display at the Annual National School Boards Association (NSBA) Conference and Trade Show on March 21-23 in Nashville, TN.... Read More

Electrical Equipment & Systems, Fasteners & Hardware

Custom Multi-Conductor Cable Harness for Industrial Gas Turbine

March 16, 2015

Gas turbine cable_300x145A manufacturer of gas turbines used for industrial applications required a wire harness for monitoring equipment measuring the vacuum in and out temperatures. RF Industries Multi-Conductor product group was selected as a vendor because of experience with ruggedized assemblies used in high vibration and high temperature environments. Close proximity between RF Industries... Read More

Fasteners & Hardware

Sherex Fastening Solutions' Akron Manufacturing Facility is awarded ISO 9001:2008 and AS9100 Quality Management Systems Certification

March 13, 2015

Tonawanda, NY – Sherex Fastening Solutions, a global leader of engineered fasteners, tooling and automation, announces today that its newest manufacturing facility located in Akron, OH has been certified to both the ISO9001:2008 and AS9100 Quality Management Systems. These certifications cover the design, manufacturing, and distribution of fasteners specifically engineered to meet the demands... Read More

Fasteners & Hardware, Mounting & Attaching Products

Nylon Cord Grips reduce cable strain over wide temperature range.

March 10, 2015

Available in light grey or black nylon with PG or Metric threads, Spiralblock® Cord Grips reduce cable strain at point of entry into enclosure or panel. Flexible extended length of up to 5 in. keeps cables from bending, and construction is designed for use in environments with ambient temperatures from -20 to +90°C. Read More

Fasteners & Hardware

Spherical Washers fit bolt thread sizes M6 to M20.

March 10, 2015

Available in metric sizes, GN 6319.1 Steel and Stainless Steel Spherical Washers, Seat and Dished Combined Type, provide undetachable combination of male and female washers similar to DIN 6319. Steel washers are case hardened all round, with depth from .2–4 mm and hardness of (550 + 100) HV 10. Stainless steel versions, used for clamping in corrosion-free environments, are European standard... Read More

Fasteners & Hardware, Fluid & Gas Flow Equipment, Mechanical Power Transmission, Transportation Industry Products

Close to the Customer: ContiTech Presents Sustainable Railway Engineering Solutions at Eurasia Rail

March 10, 2015

ContiTech is a competent contact on site / Worldwide dealer network provides outstanding service / Innovative product line for all types of rail vehicles Whether local or high-speed, rail travel is on the fast track in Turkey. Under the motto "Engineering Next Level," ContiTech has its sights on the expanding needs of this growth market. And it's not just about components and systems -... Read More

Computer Hardware & Peripherals, Fasteners & Hardware, Fluid & Gas Flow Equipment, Mounting & Attaching Products

Truss Ceiling Adapter offers 180 lb load capacity.

March 5, 2015

Designed to attach ceiling mounts to variety of trussing or pipe, Model TCA-1 is capable of adapting up to max diameter of 3 in. or max cross section dimensions of 3 x 3 in. Adapter has black powder coat finish and includes cable pass throughs for cable management. Measuring 5.5 x 5.5 x 7.6 in., adapter is suited for public view monitors or PTZ cameras in retail, commercial, or industrial... Read More

Fasteners & Hardware

Dissipative Anchor protects buildings from seismic activity.

March 5, 2015

Designed for use with Cintec wall anchor system, dissipative wall anchor allows controlled and repairable drift for walls to manage amount of seismic energy fed into structure and thereby minimize damage to building. Product consists of stainless steel plates to which 4 bolts apply pressure, creating friction to adjustable degree. Built-in stops restrict sliding motion, and connectors... Read More

Fasteners & Hardware

High Strength Washers provide 360-degree impervious seal.

February 26, 2015

Available in 4-40, 5/8, ¾, 7/8, and 1 in. sizes, BarTite High Strength Sealing Washers seal out moisture, vapors, liquids, chemicals, pressurized air, and other contaminants. Units employ stable, non-aging plastisol sealant that is resistant to wide range of liquids. Impervious 360° seal is achieved by applying torque, which sends plastisol sealant flowing out in every direction and down... Read More

Adhesives & Sealants, Fasteners & Hardware

Machinists Inc. Steps in to Provide Needed Fix for City of Seattle

February 25, 2015

Machinists Inc. had an opportunity to work on a special project in West Seattle with Seattle Public Utilities (SPU), where the aging, 1930s era water system, was giving the city of Seattle some problems. A pressure valve there has been leaking water into a reservoir for a number of years. Because of erosion, it had created a non-sealing surface, so it wouldn't seal tight. It meant the city of... Read More

Fasteners & Hardware, Mechanical Components and Assemblies

100 Year-Old Ballard Locks gets Upgrade to Keep Operating

February 23, 2015

For 100 years the Hiram M. Chittenden Lock's trunnions, gears and gates maintained the levels of Lake Washington's and Lake Union's waters. Obviously, these parts performed well for more than 100 years of nearly constant use, but as you might imagine, the Ballard Locks, as they're locally known, were due for an upgrade. For this project, Redside Construction partnered with... Read More

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage

REGO-FIX® Spotlights Advanced Toolholding Mix and More at Northwest Machine Tool Expo 2015

February 20, 2015

INDIANAPOLIS, Ind. – At the Northwest Machine Tool Expo 2015 in AI Marketing’s booth 615, REGO-FIX® will highlight several precision tooling products. The company will show a new innovation for effective tool locking and a one-of-a-kind retrofit coolant-through system for live tooling. Also on display will be a toolholding system that enables quick and uncomplicated tool changing, and a... Read More

Fasteners & Hardware, Material Handling & Storage

Hang Large Banners or Multiple Signs with a Single Ceiling Clip

February 19, 2015

Hang large banners or multiple signs with a single ceiling clip, using FFR's new Sure-Twist® Banner Bar. The Sure-Twist® Banner Bar features three holes to hang one banner or several signs at one time.  One easy-lift motion hangs banners evenly, simplifying sign installation. The Bar secures to standard 1" ceiling grid with FFR's patented twist and lock design, and is compatible... Read More