Fasteners & Hardware

Controls & Controllers, Fasteners & Hardware, Safety & Security Equipment

Trapped Key Interlocks ensure energy isolation in LOTO.

Jul 14, 2015

To optimize lockout tagout procedures, KIRK® Trapped Key Interlocks ensure energy isolation procedures cannot be circumvented. Key is removed from trapped key interlock and is with person leading lockout tagout procedure. Equipment cannot be re-energized until uniquely coded KIRK® key has been re-entered into sequence after all workers are clear from completed task and out of harm’s way.... Read More

Fasteners & Hardware, Mechanical Power Transmission

Planetary Screw Assemblies offer travel speeds up to 1.5 m/s.

Jul 14, 2015

Available with screw diameters up to 75 mm and leads up to 20 mm, Planetary Screw Assemblies achieve dynamic load capacities of 544 kN and static load capacities of 1,496 kN. Planets rotate with defined contact profile in nut around screw in parallel to axis, ensuring smooth operation and minimized noise emission. Assemblies are suited for use in medium-sized and heavy-duty machinery such as... Read More

Fasteners & Hardware, Safety & Security Equipment

Single-Press Classroom Deadbolt avoids door barricade dangers.

Jul 14, 2015

While exceeding safe school government standards (FEMA-428/BIPS-07) and complying with all building and fire safety codes, QID™ (Quick Intruder Deadbolt) classroom lock provides safe-haven solution while maintaining outside access for first responders and other authorized personnel. Deadbolt locking mechanism is activated by pushing red button, and visual indicator lets teacher know that door... Read More

Electrical Equipment & Systems, Fasteners & Hardware

Rectangular Connectors feature high amperage inserts.

Jul 14, 2015

Designed for revos BASIC housings in sizes 16 and 24, rugged revos POWER hybrid contact inserts are available with power and control terminals in various combinations. Contact configurations let design engineers select 6, 8, or 12 power contacts for max currents of 40 or 80 A and 2, 4, 12, or 36 control contacts for max current of 10 A. Along with captive screws and up to 500 mating cycle... Read More

Fasteners & Hardware

Rubber Washer prevents shaft collars from getting stuck.

Jul 14, 2015

Designed for use with U-Clip quick release shaft collars, Elasto-Ring Washer installs by hand and assures easy removal of U-Clip collar. When U-Clip is in place, Elasto-Ring is against spool flange — between flange and U-Clip. If back pressure starts to build, it is largely absorbed by Elasto-Ring which flexes against collar. Available in 10 sizes for shaft diameters from 8–35 mm, washer... Read More

Fasteners & Hardware

Sealed Lever Latch meets door ingress protection ratings.

Jul 10, 2015

Meeting NEMA 4 and IP65 standards for water and dust protection, sealed C2 Lever Latch can be used indoors and outdoors, provides consistent compression and vibration resistance, and compensates for misalignment. Design meets ingress protection requirements without having to adjust or change existing panel or door designs, making product suited for new installations and retrofits exposed to... Read More

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage

Fixturing and Material Handling Technologies to be the Focus at WESTEC 2015

Jul 10, 2015

Fixtureworks® (Fraser, MI), a leading supplier of fixturing accessories, machine tool elements and material handling components, will bring a broad spectrum of its products to booth no. 808 at WESTEC 2015, which takes place in Los Angeles, September 15-17, 2015. The products displayed will highlight the wide variety of fixturing, clamping and material handling components that allow... Read More

Construction Equipment and Supplies, Fasteners & Hardware, Services

EVS Metal Awarded Contract for New NY Bridge Project

Jul 09, 2015

RIVERDALE, NJ — EVS Metal, Inc, a leader in full-service sheet metal fabrication, machining and integration, is pleased to announce it has been awarded a manufacturing contract for the New NY Bridge project.  This multi-billion dollar design-build contract for the New York State Thruway Authority being designed and built by Tappan Zee Constructors, LLC consists of two separate 3.1 mile long... Read More

Fasteners & Hardware, Machinery & Machining Tools

Indexable Boring Tool permits small-hole rough boring.

Jul 07, 2015

With boring range of 16–21 mm diameter, MW Boring Tool is suited for semi-finish boring operations of workpieces with die cast holes. Product is built with 20 mm diameter straight shank and performs best when paired with milling chuck at fixed bore depths up to 4 x D. Spiral groove carved into body facilitates clean chip removal with help of coolant holes near end of groove.... Read More

Fasteners & Hardware

Universal Tailgate Lock installs in minutes.

Jul 06, 2015

Designed to fit all truck platforms, GateDefender™ PL9900 is made similar to padlock that fits around tailgate hinge and locks tailgate to truck. Once locked into place, tailgate can open and close but cannot be removed without included key. GateDefender also includes adapter ring to accommodate smaller trucks. Read More

Fasteners & Hardware

Single-Hole Strap supports parallel runs of multiple cables.

Jul 01, 2015

Allowing multiple runs of cable to be strapped parallel to each other using one fastener, Mighty-Hold® Duplex Universal Steel One Hole Strap ensures contractors always have proper strap for application at hand. Spring-loaded finger enables zinc-plated, steel strap to securely fasten range of AC/MC/MCIA cables. Supporting two runs of AC/MC/FMC, cULus-Listed product accommodates 14/2 to... Read More

Fasteners & Hardware, Mechanical Components and Assemblies

Carbon-Graphite Piston Rings seal high-pressure gases.

Jul 01, 2015

Carbon-graphite piston rings, used in conjunction with carbon-graphite guide rings or carrier rings that hold piston centered on cylinder bore, are self-lubricating and seal high-pressure gas in applications requiring compressed gases that do not contain oil or grease. Guide rings can be either solid rings or segmented rings with butt joints. At least two rings with off-set segment joints are... Read More

Fasteners & Hardware

Alliance Rubber's Oversized Band Product Now Available at Tractor Supply Company

Jul 01, 2015

Supersize Bands will be sold on shelves at the rural retail store operator for a trial period HOT SPRINGS, Ark. — Blue Supersize Bands are now available in limited quantities at most Tractor Supply Company locations. The bands will be in stores for the next six months. Sales results from the trial period will help determine if the bands are added to the permanent product list. "We believe these... Read More

Fasteners & Hardware, Safety & Security Equipment

Key Control Innovations from Morse Watchmans Advance Security Levels and Risk Mitigation

Jun 23, 2015

IFSEC Exhibit Highlights Industry Leading Product Portfolio London, England  - Morse Watchmans’ market-leading portfolio of key control and management solutions, featured this week at IFSEC at their booth (E1800), is helping organizations of every type improve operational security by providing innovative technology for comprehensive safeguarding and management of keys. With experience as a... Read More

Fasteners & Hardware

Patented PEM® R'ANGLE® Fasteners for Thin Metal Assemblies and Printed Circuit Boards Create Strong Right-Angle Attachment Points and Application Benefits

Jun 19, 2015

Create Strong Right-Angle Attachment Points and Application Benefits Patented PEM® R'ANGLE® fasteners for thin metal assemblies and printed circuit boards create strong right-angle attachment points to enable tighter design control, reduced hardware counts, and associated production economies.  This family of fasteners consists of self-clinching types for permanent installation into... Read More

Controls & Controllers, Fasteners & Hardware, Materials & Material Processing, Mechanical Components and Assemblies, Mechanical Power Transmission, Mounting & Attaching Products, Services

MISUMI Extends Same Day Ship Time to 6PM EST

Jun 19, 2015

Free Same Day Shipping Upgrade for in-stock components if ordered online by 6:00 p.m. EST. Orders placed with a Customer Service representative are available for Same Day Shipping when placed by 5:00pm EST. MISUMI USA, Inc., a subsidiary of MISUMI Corporation, part of MISUMI Group, Inc. (Tokyo: 9962), has announced its improved same day shipping service for all in-stock product lines. Effective... Read More

Fasteners & Hardware

Phillips Flat Head Screws attach plywood to light-gauge steel.

Jun 17, 2015

Available in 3 sizes, all of which feature #2 Phillips flat head, Plylite® Miracle Fasteners™ feature unique point design that enables plywood to be attached to 25–20 gauge steel studs. There are no threads immediately behind point, preventing ride-up as plywood is attached. As fastener is driven, shank slides through plywood and metal stud until upper threads engage in stud. Coated in... Read More

Fasteners & Hardware

Pin Clamps feature integrated pneumatic cylinder.

Jun 16, 2015

Weighing 3.4 lb, PCZ Pin Clamps provide positive part location and clamping, up to 6 mm part thickness. Gapless dual fingers clamp on both sides of hole or part, unlike single hook designs. Locating pins are available in bullet nose or low profile styles, with diameters from 8.00–16.00 mm. With retract option, low profile pin disappears into unit, below backup, for easy part release. Clamps are... Read More

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage

Small Screw Questions for Automatic Feeding and Driving by Design Tool, Inc.

Jun 16, 2015

1. How do you define "small" screws? For screw feeding systems, I would define "small" screws as screw sizes smaller than #4 for American National Standard or ANSI screws.  For metric screws, sizes smaller than 3mm would also be considered "small" screws. 2. What types of assembly applications typically use small screws (e.g., portable electronics; eyeglasses; hearing aids; etc.)? Examples of... Read More

Fasteners & Hardware, Machinery & Machining Tools, Material Handling & Storage, Mounting & Attaching Products, Portable Tools, Services

REGO-FIX® to Highlight New Precision Tooling Products at WESTEC

Jun 03, 2015

INDIANAPOLIS, Ind., – At WESTEC 2015 to be held Sept. 15- 17 at the Los Angeles Convention Center, REGO-FIX Tool Corporation will showcase three of its newest precision tooling products. On display in Schenk Intertech’s booth 1035 will be the powRgrip® 9500, a smaller sized, automatic clamping unit; secuRgrip®, an anti-pullout tool holding system; and intRlox®, a small, but mighty... Read More