Maxim Integrated Products
Sunnyvale, CA 94086
Nov 06, 2009 Consuming 20 µA of IQ to conserve battery life, 200 mA MAX16910 includes reset output with adjustable delay so no external reset IC is needed. Unit operates from 3.5-30 V to withstand cold-crank and double-battery conditions; it can also operate during load-dump conditions up to 45 V. Available in thermally enhanced 8-pin TDFN and SO packages, MAX16910 has 3 pin-selectable output-voltage configurations: 3.3 or 5 V fixed output, or externally adjustable output-voltage from 1.5-11 V.

Maxim Integrated Products
Sunnyvale, CA 94086
Nov 06, 2009 Supplied in 4 x 4 mm package, MAX17409 offers active voltage positioning that lowers output voltage in response to load current and subsequently reduces output capacitance requirements and power dissipation. Load current is sensed at MAX17409's output, minimizing noise sensitivity, and can be sensed using current-sense resistor or DC resistance of inductor. Along with 200-600 kHz adjustable switching frequency, features include overvoltage, undervoltage, and thermal-fault protection.

Maxim Integrated Products
Sunnyvale, CA 94086
Nov 06, 2009 Supplied in 2.5 x 3 mm UCSP(TM), MAX9879 combines stereo Class D speaker amp, DirectDrive® stereo headphone amp, and analog bypass switch. Class D amplifier technologies provide Class AB audio performance with Class D efficiency. Able to deliver 715 mW output power from 3.7 V supply into 8 ohm load with 88% max efficiency, product also features input mixing, volume control, click-and-pop suppression, and flexible, user-defined input architecture with preamplifier gain settings.

STMicroelectronics
GENEVA   Switzerland
Nov 06, 2009 Intended for car body applications, L99PM62XP helps reduce stand-by current consumption to preserve energy stored in car battery. Dedicated regulator with optimized dynamic behavior enables periodic system activation to monitor configurable wake-up sources. Fail-safe functionality, including supervision of MCU, supply voltages, and temperatures, promotes sustainability and reliability of automotive electronic control units.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Nov 06, 2009 Carrying 4-63 V ratings and offered in A/B/C/D/E/V case sizes, TANTAMOUNT® Hi-Rel COTS T83, low-ESR TR3, and standard industrial grade 293D series solid tantalum chip capacitors allow designers to incorporate solid SMT tantalum capacitors into +28 V power supply designs while fully complying with derating requirements. Products provide options for decoupling in 63 V applications and power supplies at +28 V as well as dc-to-dc conversion at 35 V.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Nov 06, 2009 Operating in temperatures from -55 to +125°C, PLT series precision thin film resistors are made of corrosion-resistant, stable film and offer performance characteristics of 500 ppm at +70°C for 10,000 hr. They are available in 0603, 0805, and 1206 case sizes, with resistance range from 250 W to 100 kW. Noise rating is less than -30 dB, voltage coefficients are 0.1 ppm/V, and power ratings are from 150-400 mW at +70°C. Units are available with lead-free or lead terminations.

Vishay Intertechnology, Inc.
Malvern, PA 19355 2143
Nov 06, 2009 Constructed to minimize effects of stress factors and humidity, VHP100 hermetically sealed Bulk Metal® Foil resistor provides tolerances to ±0.005% and load-life stability of ±0.005% typ for 2,000 hr at +70°C and 0.3 W. Standard resistance range of 100 x to 150 kx, and other values are available upon request. Difference between Max and Min resistance values will not deviate by more than 60 ppm over -55 to +125°C range. Thermal stabilization time is under 1 sec, and rise time is 1.0 ns.

Linear Technology Corp.
Milpitas, CA 95035-7417
Nov 06, 2009 Housed in thermally enhanced 3 x 3 mm QFN-16 package, LTC3775 synchronous step-down DC/DC switching regulator controller features 4.5-38 V input range and 30 ns minimum on-time. Onboard MOSFET gate drivers allow use of high-power external MOSFETs to produce output currents up to 20 A with output voltages ranging from 0.6 to 80% of input voltage. Constant-frequency, leading edge modulation, voltage mode line feed forward architecture provides selectable or PLL frequency from 250 kHz to 1 MHz.

High Energy Corp.
Parkesburg, PA 19365
Nov 06, 2009 Measuring 1 7/8 x 1½ x 1½ in. and weighing 0.9 lb, CHGOIL5XXX series mounts with two ¼ or 6 mm bolts on 1½ in. mounting footprint. Capacitors in CHLOIL5XXX series, measuring 2¾ x 1 3/16 x 1¼ in. and weighing 0.7 lb, mount with 2¼ or 6 mm bolts on 5/8 in. footprint. Both conduction-cooled, metallized polypropylene capacitors are available in 0.05-2.4 µf and operate continuously at 1,000 Vrms and 400 kHz, generating 250 kVAr. At lower voltages, they operate at frequencies up to 1 MHz.

SIE Computing Solutions, Inc.
Brockton, MA 02301
Nov 06, 2009 Configurable for variety of liquids, including polyalphaolefin and ethylene glycol/water mixture, 720 Series suits high thermal load systems, based on VPX technology. Cooling side panels are configurable for either front or rear coupler access. Line-replaceable unit features avionic approved field changeable/replaceable components and low MTTR. Product can be installed onto tray with precision blind-mate drip-less connection, in combination with mating liquid avionics tray.

Murata Electronics North America, Inc.
Smyrna, GA 30080
Nov 06, 2009 Series LQH3NP_J0 series wirewound chip inductors has low profile (1.2 mm max), and is available in 1.0-47 µH denominations. The series features low DC resistance, down to 0.040 Ohm, and rated current up to 1.62 A is supported. All parts are magnetically shielded to avoid electromagnetic interference with surrounding circuitry. Maximum footprint is 3.2 x 3.2 mm.

Lumex Inc.
Palatine, IL 60067
Nov 05, 2009 Measuring 10 x 10 mm, 3 W TitanBrite(TM) LED contains three 1 W dies in red, green, and blue. Square shape is useful for applications that require optimal resolution for up-close viewing and for integration of dynamic, smaller images. RGB light allows for adjustable color tuning and can create shades of white, as well as every other color in visible spectrum. Applications include electronic signage, safety/security lighting, general illumination, and graphic backlighting.

Texas Instruments, Inc. (TI)
Dallas, TX 75243-4136
Nov 05, 2009 DM368IPNC-MT5 IP camera reference design can process H.264 main profile 1080p video at 30 fps. Complete camera is based on DaVinci(TM) video processor and utilizes 3 W. Performance boost allows camera to support 720p at 60 fps for multiple video formats, including H.264 and MPEG-4, as well as MJPEG at 5 MP at 15 fps. Linux application software package, included, offer ISP Tuning Tool v1.0, hardware-accelerated AES encryption module, and support for PSIA standard.

RF Micro Devices, Inc.
Greensboro, NC 27409-9421
Nov 05, 2009 Consisting of input AGC amplifier, mixer, and video/AGC amplifier, CMOS-based Model RFFC0085 is designed for use as out-of-band receive circuit tuner in cable industry and SATCOM-DBS set-top boxes, DOCSIS® set-top gateways, OpenCable Application Platform CableCards, Tru2Way(TM) products, and CableCard-equipped HDTVs. Housed in 3 x 3 mm QFN-16 package, device operates from +3.3 Vdc with low signal distortion.

Z-Communications, Inc.
San Diego, CA 92126
Nov 05, 2009 Operating at 1,915-1,925 MHz with tuning voltage of 0-5 Vdc, Model CRO1920C-LF features typical phase noise of -119 dBc/Hz at 10 KHz offset and tuning sensitivity of 6 MHz/V. Unit delivers 3 dBm output power at 8 Vdc supply while drawing 18 mA over temperature range of -10 to 75°C. Housed in 0.5 x 0.5 x 0.22 in. MINI-16-SM package, RoHS-compliant VCO offers -15 dBc typical harmonic suppression and is suited for satellite communication and fixed wireless applications.

ROHM Semiconductor USA LLC
San Diego, CA 92121
Nov 04, 2009 Housed in 12 x 12 mm package, Model BU9457KV is compatible with MP3 format while Model BU9458KV is compatible with MP3, WMA, and AAC formats. Units integrate communication error recovery circuit in USB interface block and provide ESD resistance of 6 kV at USB terminal/15 kV air/8 kV contact discharge, eliminating need for terminal protection ICs. Making it possible to play back music from USB memory and SD memory cards, chips are suited for car, home, and portable audio applications.

VTI Instruments Corporation
Irvine, CA 92614
Nov 04, 2009 Complementing EX1000 data acquisition instruments, EX10SC Modular Signal Conditioning platform provides industrial-grade 1,500 Vrms isolation and 240 Vac input protection across broad range of transducers and input types. System enables integration of thermocouple, RTD, thermistor, strain gauge, pressure, voltage, and frequency inputs into EX1000A, EX1016A, and EX1032A data stream. Input channels can be configured individually by matching signal characteristics with signal conditioning module.

Linear Technology Corp.
Milpitas, CA 95035-7417
Nov 04, 2009 Featuring programmable average input current limit, Model LTC3606B delivers up to 800 mA of continuous output current with efficiencies up to 96%. Using constant frequency and current mode architecture, unit operates from input voltage of 2.5-5.5 V, making it suited for single-cell Li-Ion and USB applications. Device can generate output voltages from 0.6-5 V and uses switching frequency of 2.25 MHz. Housed in 3 x 3 mm DFN-8 package, synchronous buck regulator operates from -40 to 125°C.

RF Micro Devices, Inc.
Greensboro, NC 27409-9421
Nov 04, 2009 Models D10040200PL1 and D10040230PL1 are GaN based hybrid power doubler amplifiers designed to provide final amplifier stage for CATV trunk amplifiers, line extenders, and optical nodes. Units operate from 45-1,000 MHz and feature current consumption of 24 V, 380 mA. They offer high output and optimal linearity/return loss performance with low noise. Modules utilize GaAs pHEMT and GaN HEMT die.

SchmartBoard
Fremont, CA 94538
Nov 04, 2009 Through hole prototyping board features offset traced rows of holes on ¾ of board, and ¼ of board has untraced holes. Unit has 2 columns of power and ground strips, and every 10th row is silk-screened to aid with part placement. Device can be connected to ground with mounting holes. PCB is also scored to break in half.