B & K Precision Corp.
Yorba Linda, CA 92887
Sep 02, 2009 Able to produce nearly any possible waveform, single-channel Model 4076 and dual-channel Model 4079 provide frequency range from 1 µHz to 50 MHz for sine and square waveforms and up to 62.5 MHz in arbitrary mode. With 14-bit amplitude resolution and up to 4 million points of length, waveforms can be output in continuous, triggered, gated, or burst modes. Both arbitrary waveform/function generators include front panel keypad, graphical digital display, and GPIB or RS232 interface capability.

GAO Instruments Inc.,
Toronto   Canada
Sep 01, 2009 Able to be embedded into target systems to carry out development, A0710001 arbitrary waveform generator module generates standard waveforms such as sine waves, square waves, saw-toothed waves, and pulse waves and frequency and amplitude modulation. DDS CORE controller drives arbitrary waveform generation with output repeat frequency range from 0.02 Hz to 5 MHz with 0.02 Hz adjustment steps. It can be used in various situations where complex signal/excitation sources are required.

Guzik Technical Enterprises
Mountain View, CA 95134
Aug 24, 2009 Built without display and taking up 3U height in test rack, WDM 5000 Series allows system integrators requiring high-speed DAQ to achieve high-fidelity, deep memory waveform acquisition. Data transfer can reach sustained rates of 120 Mbps, and up to 4 Gpoints of waveform memory promotes accuracy of measurement and statistical analysis. Also, custom measurement algorithms may also be built directly into FPGA-based digital processing engine.

National Instruments Corp.
Austin, TX 78759-3504
Jul 08, 2009 Suited for automated test applications, 32-channel PXI Express (PXIe)-based digital instruments NI PXIe-6544/45 are selectable-voltage digital waveform generator/analyzers respectively supporting clock rates to 100 and 200 MHz. Latter also provides typical streaming rates of 660 MBps. With 3U form factor, 8-slot PXIe chassis (NI PXIe-1082) offers 7 PXIe peripheral slots, up to 1 GBps per-slot bandwidth, and 4 GBps total system bandwidth.

National Instruments Corp.
Austin, TX 78759-3504
Jun 25, 2009 GPS Simulation Toolkit v1.5 for LabVIEW offers engineers graphical API for validating and testing GPS receivers. Engineers can simulate C/A codes for up to 12 satellites in L1 band. Toolkit also features waveform creation tools to specify both receiver location and velocity, and ability to create waveforms with up to 24 hours of non-repeating GPS satellite signals. Capabilities for generating custom motion trajectories are also included for capturing signals on specific route.

GAO Instruments Inc.,
Toronto   Canada
May 18, 2009 Able to be embedded into target systems to carry out development, G-PEM4311 module is used in various situations where complex signal/excitation sources are required. Stable solution integrates frequency resolution function; and generates routine waveforms such as sine waves, square waves, saw-toothed waves, and pulse waves as well as frequency and amplitude modulation. DDS CORE controller drives AWG with output repeat frequency range of 0.02-5 MHz, with 0.02 Hz adjustment.

B & K Precision Corp.
Yorba Linda, CA 92887
Mar 10, 2009 Single-channel Model 4075 and dual-channel 4078 arbitrary waveform/function generators utilize Direct Digital Synthesis architecture to generate sine and square waveforms up to 25 MHz. Both produce waveforms with 14-bit amplitude resolution, 100 MSa/s sample rate, and up to 400,000 points length, which can be output in continuous, triggered, gated, or burst modes. Products include internal or external AM, FM, and FSK modulation and can be remotely controlled via RS-232 interface.

Saelig Co., Inc.
Pittsford, NY 14534
Jan 23, 2009 Including 2-channel, 10-bit, 20 MS/sec, 2 MHz oscilloscope; 2-channel spectrum-analyzer; and 3 MHz 8-bit arbitrary-waveform/standard-function generator with 8 digital I/O lines, CircuitGear CGR-101(TM) also functions as network analyzer, noise generator and PWM output source. Oscilloscope, generator, and digital I/O are operated from custom open-source Tcl/Tk software, and device is also LabView(TM)-compatible, and it can also be controlled by serial-port-driving software.

Strategic Test Corporation
Woburn, MA 01801-1915
Dec 12, 2008 Delivering 20 MS/s, Model UF2e-6011 AWG PCI Express Card features 2 channels, each with its own 14-bit DAC and choice of 3 reconstruction filters with bandwidths of 5 MHz, 1 MHz, or 100 kHz. Unit provides SNR of better than 61.5 dB, THD of less than 70.4 dB, and SFDR greater than 85.5 dB. Streaming from multiple hard disks in RAID configuration is possible at up to 60 MS/s. Applications include I&Q signal generation, RADAR system development, and communications testing.

Berkeley Nucleonics Corp.
San Rafael, CA 94901
Dec 03, 2008 Able to generate 50 MHz sine waves and 10 MHz arbitrary waveforms, Model 645 also offers conventional capabilities of pulse, ramp, triangle, noise, and DC waveforms; AM, FM, PM (PSK), FSK, and PWM modulation; and linear and logarithmic sweeps and burst. Unit addresses applications such as benchtop research and development, radar simulation, circuit testing, custom waveform generation, and throughput and response measurements.

SRI/PMD Inc.
Melbourne, FL 32934
Nov 11, 2008 Combining digital wideband waveform modulator with RF upconverter and link test capabilities, SE-4255 RF Exciter and Test Signal Simulator produces transmission-ready signals in Baseband, Upper L-, Lower L-, and both transmit and receive S-Band frequency ranges. It features Auto-BERT, automated test application for construction and display of waterfall performance curves. Product suits mobile tracking and data systems, as well as flight systems integration, simulation, and testing.

Keithley Instruments, Inc.
Cleveland, OH 44139 1891
Oct 27, 2008 With 50 MHz max sine wave frequency, Model 3390 can perform function, pulse, arbitrary waveform, pattern, and noise generation as well as AM/FM/PM/FSK/PWM modulation. Features include 25 MHz pulse frequency with 10 ns min width; 256,000-point, 14-bit resolution function generator; and precision pulses and square waves with rise/fall times under 10 ns. Product also comes with LXI Class C-compliant Ethernet, TMC-compliant USB, and standard GPIB interfaces.

Rohde & Schwarz GmbH & Co
  Germany
Oct 23, 2008 R&S AFQ100B is signal source with 528 MHz bandwidth used for developing and producing ultra-wideband (UWB) components. With R&S AFQ-K264 software option, instrument's interface facilitates generation of all test signals required for WiMedia UWB band. Baseband signal generator can deliver signals with modulated pulses or wide, nonlinear chirps for modern radar systems. R&S AFQ100B can also generate various digital communications standards, such as WCDMA, HSPA+, WiMAX, WLAN, and LTE.

Agilent Technologies, Inc
Santa Clara, CA 95051
Sep 11, 2008 Model 33210A is 10 MHz Function/Arbitrary Waveform Generator that provides stable, accurate, and low-distortion signals with up to 10 built-in waveforms needed for bench and system applications. It includes USB 2.0, 10/100 Base-T Ethernet (LAN) and GPIB interfaces as standard features, enabling quick connectivity to PC or network. High frequency unit can also be remotely operated from any browser by connecting to its built-in web page.

Tektronix, Inc.
Beaverton, OR 97077
Aug 21, 2008 With 9.6 GHz effective RF output, 10 bit resolution, and sample rates up to 24 GS/s, AWG7000B Series can produce high-speed serial waveforms with real life imperfections including noise, jitter, pre/de-emphasis, and multi-level signaling up to 8 Gb/s. Units also have ability to generate up to 6 signals simultaneously. Generators are suited for engineers developing SATA Gen 3, PCI Express 2.0, PCI Express 3.0, HDMI 1.3, and DisplayPort devices.

ACCES I/O Products, Inc.
San Diego, CA 92121 1506
Aug 11, 2008 Including 4 models, USB-DIO-16H port-powered USB 2.0 device features 16 high-speed buffered digital inputs or outputs at continuous, sustained streaming speeds up to 16 MB/sec for unlimited waveform length. Capable of 80 MB/sec bursts with handshaking signals for synchronizing communications and additional 18 bits of general purpose digital I/O, it offers hot swapping functionality for quick connect/disconnect whenever users need additional I/O on their USB port.

GAO Tek Inc.
Toronto M1B2K4  Canada
Aug 11, 2008 Enabling high frequency accuracy and waveform resolution, GAO3005 USB Arbitrary Waveform Generator allows users to arbitrarily edit waveforms using mouse or generate range of regular waveforms including sine, square, triangle, saw-tooth, TTL, white noise, Gaussian noise, trapezoid, exponent, and AM and FM signals. Offered with SDK and API, it can directly read waveform data files produced by Tektronix oscilloscope or by Tektronix waveform editing software and redisplay waveform.

Agilent Technologies, Inc.
Palo Alto, CA 94303
Jul 21, 2008 Model B1500A accepts up to 5 self-contained waveform generator/fast measurement units (WGFMUs) capable of performing high-speed measurements required to characterize ultrafast Negative Bias Temperature Instability and other applications such as pulsed IV, Random Telegraph Signal, and non-volatile resistive memory. Dual-channel Agilent B1530A WGFMU combines arbitrary linear waveform generation with synchronized fast current or voltage (IV) measurement as fast as 5 ns.

Highland Technology, Inc.
San Francisco, CA 94103
Jul 08, 2008 Model T346 has 4 output channels capable of generating standard and arbitrary waveforms from micro Hz to 32 MHz and 4 additional internal channels usable as modulation and summing sources. Channels can be pulse/PWM and Gaussian noise sources, and can also be summed with or modulate one another in any combination. Modulations include AM, FM, PM, and PWM. Model T344 is 4-channel ARB without modulations.

Keithley Instruments, Inc.
Cleveland, OH 44139 1891
Jun 30, 2008 Featuring signal library for SISO and MIMO wireless standards, SignalMeister(TM) v2.0 uses click-and-drag, objects-based approach to facilitate creation of basic and complex waveforms. It enables creation of entire range of signals in accordance with WiMAX/WLAN wireless connectivity standards and 3GPP/3GPP2 cellular standards. With this PC-based RF development tool, users can create waveforms from multiple signal standards with optional additive impairments and channel modeling.