Bliley Technologies, Inc
Erie, PA 16508-0428
Nov 16, 2009 Measuring 1 x 1 x .46 in., NV45AD1725 offers 100 MHz frequency, sensitivity rated at 5 x 10^-10per g/axis, thermal stability of ±50 ppb, and low power consumption. It is designed to offer ultra low phase noise for microwave-frequency systems used in heavy vibration environments. Suitable for microwave communication, radar, and navigation and equipment systems, miniature device is available in leaded and RoHS compliant versions.

Connor-Winfield Corp., The
Aurora, IL 60505
Nov 09, 2009 Series OH200 OCXOs/OCVCXOs require 3 W over 0-70°C temperature range and 4.5 W over -40 to +85°C range, and provide temperature stabilities from 6-20 ppb absolute over both ranges. Products support frequencies of 5.0-40.0 MHz and have warm up times of 5 min to 0.10 ppm of final frequency. Available in LVCMOS and HCMOS outputs, they offer low phase noise/Allen Variance specifications. Units are housed in 1.1 x 1.4 x 0.5 in., hermetically sealed package.

Maxim Integrated Products
Sunnyvale, CA 94086
Nov 03, 2009 Model DS4625 LVPECL crystal oscillator produces dual-output-frequency combinations ranging from 100-625 MHz. It ensures jitter performance of less than 1.0 psec RMS at 12 kHz to 20 MHz for high current, high frequency, and differential output applications. Packaged in 5 x 3.2 mm LCC, it is based on LC-PLL IC that uses fundamental AT-cut crystals, so operation isn't affected by frequency deviation. Product operates in temperatures from -40 to +70°C.

AVX Corp.
Myrtle Beach, SC 29578
Oct 20, 2009 Respectively supplied in packages up to 3.2 x 2.5 x 1.0 mm and 2.5 x 2.0 x 0.8 mm, KT3225 and KT2520 series offer frequency stability of ±0.5 ppm over -40 to +85°C range and frequency stability of ±3.0 ppm from -40 to +105°C. Applications for these temperature compensated crystal oscillators (TCXOs) include automotive GPS systems, GPS modules, marine navigation equipment, and high-end industrial electronics.

Fox Electronics
Fort Myers, FL 33905 5022
Oct 15, 2009 With footprint of only 3.2 x 2.5 mm and height of 1.2 mm, FOX923-GP Series comes with stability of up to ±0.5 ppm across operating temperature range of -30 to 85°C. RoHS-compliant ceramic SMD devices offer frequency range from 16-27 MHz, and have input current of 1.5 mA in frequencies from 16-23 MHz and 1.7 mA from 24-27 MHz. Available as TCXOs or VCTCXOs, products come in supply voltages from 1.8-3.3 V. Stability over supply voltage change is ±0.3 ppm and ±0.2 ppm over load change.

Vectron International
Hudson, NH 03051
Oct 15, 2009 Housed in 5 x 7 mm enclosure, Models 1118E, 1118R, and 1118B include Swept Quartz crystals, which eliminate potential for significant frequency shifts. Units are governed by OS-68338 document, which ensures they perform to highest expectations for space-qualified, hybrid clocks. Designed for standard 5.0 Vdc operation, oscillators also exceed stringent MIL-STD-202 shock and vibration levels normally imposed for tactical and space flight environments.

Connor-Winfield Corp., The
Aurora, IL 60505
Oct 12, 2009 Capable of holding sub 1 ppm stabilities over -30° to 85°C temperature range, D53G Series sub-miniature precision TCXOs suit Stratum 3, GPS receivers, instrumentation, Femtocell, FTTH, and FTTC applications. Available in 5 x 3.2 mm surface mount package, units feature 3.3 Vdc operational voltage, frequency stability at ±0.50 ppm, and less than 1 pS RMS jitter. TCXOs are RoHS compliant, and come in tape and reel packaging.

Epcos, Inc.
Iselin, NJ 08830
Sep 11, 2009 With a footprint of 3 x 3 mm², SAW resonators are mounted on quartz substrate in hermetically sealed package. AEC-Q200 qualified units have operating temperature range between -45 and +125°C. Model R990 (433.92 MHz) and R991 (315 MHz) are suitable for high-precision wireless transmitters in automotive electronic applications such as remote keyless entry and tire pressure monitoring systems as well as other applications in ISM bands.

Bliley Technologies, Inc
Erie, PA 16508-0428
Sep 01, 2009 Available in through-hole and surface mount configurations, DIP NVG79 OCXO series features low start-up power requirements, low steady state power, and rapid warm-up time. RoHS compliant OCXO measures only 0.355 in. high and offers wide frequency range of 20 kHz to 54 MHz. Device is configured for mobile communication and mobile data transmission systems in telecom, utility, industrial, and military sectors.

Connor-Winfield Corp., The
Aurora, IL 60505
Aug 28, 2009 Housed in 5 x 7 mm surface mount package, LM Series provides LVDS differential outputs with enable/disable function, while PM Series provides LVPECL differential outputs. Frequency range of 25-670 MHz covers applications in SONET, GE, FC, G.709, OTU1, OTU2, 10GE copper and fiber, 10GEFC, SAS, HDVUSA, HDVEUR, and DDR clock rates. Operating from -40 to 85°C, RoHS-compliant oscillators feature frequency stabilities as low as 20 ppm and low jitter of 0.6 psec RMS typical.

Fox Electronics
Fort Myers, FL 33905 5022
Aug 27, 2009 Housed in 5.0 x 3.2 mm package, 2.5 V XpressO FVXO-PC52 LVPECL Oscillators employ third order Delta Sigma Modulator to minimize noise levels. Units offer frequency resolution to 6 decimal places, absolute pull range of +50 ppm, and operating temperature of -20 to +70°C or -40 to +85°C. Constructed with gold over nickel termination finish, oscillators are fully RoHS-compliant and have tri-state enable/disable feature.

Crystek Crystals Corp.
Fort Myers, FL 33913
Aug 25, 2009 Designed using SAW (surface acoustic wave) crystal technology, 1.090 GHz CCSO-014-1090 provides low noise, low jitter performance with true-sinewave output of +12 dBm min. It features +12 V input voltage, -138 dBc/Hz phase noise at 10 kHz offset, second harmonic of -40 dBc maximum, and has no sub-harmonic. Suited for Identification Friend or Foe applications, oscillator is available in 14 PIN DIP hermetically sealed package.

Ecliptek Corporation
Costa Mesa, CA 92626
Aug 14, 2009 Offered in 3.2 x 5.0 and 5.0 x 7.0 mm packages, 32.768 kHz ceramic surface mount crystal clock oscillators EB13K5 and EB13K7 (3.3 Vdc) and (2.5 Vdc) EB15K5 and EB15K7 are available in variety of configurations including frequency stabilities as low as ±20 ppm maximum and wide operating temperature ranges of -40 to +85°C. Oscillators are suited for industrial controls, office equipment, consumer electronics, portable instrumentation, and other general purpose RTC applications.

Raltron Electronics Corp.
Miami, FL 33172
Aug 11, 2009 Incorporating low frequency crystal with low jitter synthesis, CSMF series clock oscillators and VSMF series VCOs are based on advanced Digital PLL Platform that can be pre-programmed for up to 2 different output frequencies within 10-1,200 MHz range. Operating voltage for both units is from 2.5-3.3 V at 35-45 mA within their frequency range, with rms phase jitter at 0.8 ps typical within operating temperature range of -40 to +85ºC. Units are offered in 5 X 7 mm ceramic package.

Ecliptek Corporation
Costa Mesa, CA 92626
Jul 28, 2009 Supplied in 2.0 x 2.5 x 0.9 mm SMD package, EH56/EH57/EH59 are available in 1.8, 2.5, or 3.3 Vdc configurations and address key clocking applications. Characteristics include frequency stabilities as low as ±20 ppm max, operating temperature range as wide as -45 to +85°C, and frequencies from 3.300 up to 100.000 MHz. Applications are varied, and options include tri-state (high impedance) and duty cycle of 50% ±5%.

Greenray Industries Inc.
Mechanicsburg, PA 17055
Jul 15, 2009 Measuring only 5 x 3.2 x 2 mm, T53 Series provides up to 50,000 g acceleration and g-sensitivity as low as 7 x 10-10, and offers Clipped Sinewave or CMOS outputs. It is designed as reference oscillator for critical timing applications that demand small footprint. Applications include smart munitions, GPS, mobile radio, SONET, WiMAX, WLAN, Stratum 3, and Femtocell markets.

Ecliptek Corporation
Costa Mesa, CA 92626
Jun 16, 2009 Available in variety of configurations, EH46 (3.3 Vdc), EH47 (2.5 Vdc), and EH49 (1.8 Vdc) series CMOS oscillators include frequency stabilities as low as ±20 ppm maximum and operating temperature ranging from -45 to +85°C. They offer frequencies ranging from 2.500-200.000 MHz. Units suit networking, test equipment, wireless LAN, gigabit Ethernet, computer peripherals, industrial controls, and other general purpose clock applications.

Connor-Winfield Corp., The
Aurora, IL 60505
Jun 10, 2009 Available in sub-miniature 5 x 3.2 mm SMT Package, RoHS Compliant M Series TCXOs/VCTCXOs are designed for use in Stratum 3 applications, GPS receivers, instrumentation, femtocell, and FTTH and FTTC. They offer 3.3 and 5.0 V operation, and have temperature ranges of 0 to 70°C and -40 to 85°C. Frequency stabilities are ±0.28 ppm with Stratum 3 Holdover and ±0.50 or 1.00 ppm. Outputs are available as LVCMOS or clipped sine wave.

Greenray Industries Inc.
Mechanicsburg, PA 17055
Jun 03, 2009 Housed in 4-pin dual-inline package, ZYH1002/1003 Series OCXOs require 195 mW at +25°C with slope of -3.4 MW/°C, making them suited for applications that require low power consumption and/or battery power. Standard frequencies are 10-20 MHz, but any frequency from 10-50 MHz is available. ZYH1002 output is CMOS compatible with 50/50 ±5% duty cycle, while ZYH1003 provides clipped sinewave output of 1 Vp-p into 10 kW load. Standard input supply voltage is +5 Vdc.

Fox Electronics
Fort Myers, FL 33905 5022
May 13, 2009 Model FVXO-LC52 XpressO LVDS VCXO is 2.5 V oscillator with configurable frequency range of 0.75 MHz through 1.0 GHz. VCXOs incorporate ASICs that use 3rd order Delta Sigma Modulator to reduce noise levels. Operating in temperatures from -20 to +70°C or -40 to +85°C, oscillators offer frequency resolution to 6 decimal places and absolute pull range of +50 ppm. RoHS-compliant, package has tri-state enable/disable feature and is constructed with gold over nickel termination finish.