FCI    Etters, PA 17319
Feb 04, 2010 Featuring .050 in. pitch, Minitek 127(TM) modular interconnection system includes through-mount and surface-mount, as well as straight and right-angle versions, with pin counts up to 100 positions and 3 types of plating. Miniature system is capable of wide variation of board-to-board and cable-to-board interconnections.

ITT Interconnect Solutions    Santa Ana, CA 92705
May 18, 2009 Fully compatible with IEC 61076-4-104 backplane connectors, Tempus CBC 20 connectors are suited for use in telecommunication, industrial, medical, and instrumentation applications. Cable receptacles are available in 4 row versions with 4 x 6 and 4 x 12 contacts and 5 row versions with 5 x 6 and 5 x 12 contacts. Offering quick termination without need for wire stripping, receptacles accommodate AWG 24-30 wire sizes with insulation displacement contact (IDC).

Spectrum Control, Inc.    Fairview, PA 16415
Apr 14, 2009 Supplied in industry-standard package of flame-retardant polyester thermoplastic, RoHS-compliant filtered modular jack connector is available in inductor, capacitor, or ESD versions and assists with FCC Part 15 A/B as well as CISPR 22 compliance. Shielded or unshielded models are available, both featuring duplex plated contacts with solder tails and redundant shielding tabs. Products are fully intermateable and interchangeable with standard unfiltered RJ45 modular jack connectors.

Hirose Electric USA, Inc.    Cupertino, CA 95014
Feb 18, 2009 Featuring 3-piece modular design, IT3(TM) Series mezzanine connectors consist of 2 low profile receptacles mounted to each parallel PC board with BGA solder balls mounted in staggered array of 1.5 x 1.75 mm pitch. Reducing possibility of mechanical damage to BGA joints, floating interposer module connects 2 mounted receptacles. High density board-to-board connectors are rated at 50 W single ended impedance and 100 W differential impedance.

TE Connectivity Ltd.    Berwyn, PA 19312
Feb 13, 2009 Available in aluminum or corrosion resisting steel, Raychem MTCT modular rectangular connectors accept standard ARINC 801 LuxCis(TM) optical termini in compact, lightweight design. Four-position MTCT connectors feature quarter-turn bayonet quick disconnect or jackscrew mating hardware, keying, and fluorosilicone interfacial seal. Enhanced mating interface ensures optical alignment of termini, and only commonly available tools are required for installation.

Stewart Connector    Glen Rock, PA 17327
Sep 02, 2008 Optimized for extended life in voice and data applications, RJ11 and RJ45 connectors are available with EPP-918A protective compound that shields gold-plated contacts from corrosive elements and wear due to line cord insertion/reinsertion. Compound provides pore blocking and lubricating properties in addition to moisture, humidity, dirt, and chemical resistance. Offered in shielded/unshielded version with 1-12 ports, vertical and right-angle connectors operate from -40 to +85°C.

FCI Electronics    Etters, PA 17319 9769
Oct 17, 2006 With maximum current rating of 2 A per contact, Minitek(TM) 2.00 mm pitch modular connector systems include PCB receptacles, slim-line and shrouded headers, crimp-to-wire housings and terminals, unshrouded headers, and IDC receptacles. They are available in surface-mount and through-hole double-row versions in either straight or right angle orientation from 4-50 positions.

ERNI Electronics, Inc.    Midlothian, VA 23112
Jan 27, 2006 Right-angle, Type C ERmet THR Connectors offer 55 signal contacts on 25 mm modules and are suited for fully automatic, surface mount placement of plug-in cards. Units are available with or without metal shield, but are not equipped with pre-alignment pins. High-temperature resistant thermoplastic insulating body allows manufacturers to use connectors in all SMT soldering processes. Units are configured for RoHS-compliant production and offer capacity of 1.5 A at 20°C.

Harting KGaA      Germany
Jan 12, 2006 Suitable for use in all Han-Modular® hinged frames, Han® EEE module accommodates 20 Han E® contacts with crimp termination. Module is intended for signal and power transmission and is rated for 500 V at 16 A. Han-Modular system enables users to assemble connectors to their own design requirements and configurations.

Lapp USA    Florham Park, NJ 07932
Apr 08, 2005 Rectangular EPIC® Modular Series allows various modules of differing voltage and current ratings to be assembled in single insert frame. Rated up to 82 A and 1,000 V, UL/CSA approved modules are available in coax, fiber-optic, and silver- and gold-plated crimp contact; high-current screw terminated; and quick wiring cage clamp configurations. Modular frames fit into EPIC® Industrial Connector housings rated IP65 and NEMA 4, 4X, and 12.

1Ohm Corporation    Toronto, ON M9P 3B0  Canada
Jan 22, 2004 Bolt-type panel/plate mountable feedthru and junction block connectors have modular design and do not require mating connectors. Stud-type junction block connectors incorporate steel plated studs on non-feed-thru models; feed-thru connectors have copper alloy. Products are available in 1/4-20, 3/8-16, 1/2-13 in. sizes with respective termination ratings of 100 A, 1,500 V; 250 A, 1,500 V; and 400 A, 1,500 V.