Automation Systems Interconnect Inc.
Mechanicsburg, PA 17055
Aug 25, 2009 Commonly used for Ethernet connections, RAP10-1-45CS and RAP6-45CS Through Panel Remote Access Interface Connectors provide means for passing RJ45 connector equipped with cable to inside of panel or piece of equipment without shutting down or opening door of equipment. Units come with hinged dust cover and can be equipped with protection components such as fuses and circuit breakers. With dust cover closed and latched, interfaces have IP67 rating, providing water-tight seal.

Samtec, Inc.
New Albany, IN 47151 1147
Aug 24, 2009 Right Angle SEARAY(TM) Open Pin Field Sockets (SEAF-RA Series) have .050 x .050 in. grid array for maximum grounding and routing flexibility and are optimized to reduce skew and impedance mismatch. They feature Edge Rate(TM) contacts, which are designed for optimal signal integrity, reduced broadside coupling and crosstalk, and high cycles. Sockets are available in 4-row (up to 200 contacts) and 6-row (up to 300 contacts) configurations.

Molex Inc.
Lisle, IL 60532-1682
Aug 20, 2009 Built in accordance with PROFINET specification, RJ-45 Ethernet plugs and jacks are industrial data interconnect products that deliver Category 5 (100 Mbps Fast Ethernet) performance. Featuring standard grid of .551 in., IP20 data plug enables connection to 22 AWG cables for support of Insulation Displacement Technology. Each IP67/IP20-rated connector has durability rating of 750 mating cycles, with hybrid jacks rated at 500 mating cycles, and working voltage of 48 V.

Radiall
Chandler, AZ 85226
Aug 19, 2009 Featuring snap-on Quick Lock technology, high density RF coaxial Waterproof QMA (WQMA) connectors offer electrical performance and environmental characteristics, eliminating need for watertight enclosures or cable entries. They feature 100 matings minimum, straight and right angle options, wide temperature range of -40 to +105°C, and 200 W power rating at 1 GHz, 75°C. RoHS compliant connectors mate with any QLF® certified standard QMA jack, providing IP68 rated ingress protection.

Binder-USA, LP
Camarillo, CA 93012
Aug 14, 2009 Available with dia of 14 mm, M9 metal connectors feature internal iris spring for conection between cable shield and connector body. This allows installation of braided or metal foil shield with 360° protection from electromagnetic interference. Both male and female connectors are offered with 2, 3, 4, 5, 7 and 8 gold-plated contacts, and cable outlet accepts cable dia from 4-5.5 mm. Connectors have IP67 rated connection, preventing ingress of liquids and debris.

RADIALL Inc
Chandler, AZ 85226
Aug 07, 2009 Available in 3 lengths, SMP-Spring Adapters are female-to-female, spring-loaded units designed for module-to-module and board-to-board high frequency interconnections. Adapters feature .046 in. axial travel, ±.010 in. radial misalignment tolerance, operating frequency of DC-18 GHz, and 1.2 Max VSWR guaranteed at 12 GHz. Units are suited for military applications using active antennas that have large number of coaxial interconnections per module or up to 60 SMP ports on single board.

L-Com, Inc.
North Andover, MA 01845
Aug 06, 2009 Suited for space-constrained applications, TDG1026KC-R5E offers true 90° connectivity. This unique coupler, designed to address tight-fit applications commonly seen with wall plates and some panel designs, fits standard .765 x .585 in. keystone openings and can be used for voice, video, and data applications. Design is compliant with Category 5E standards.

Samtec, Inc.
New Albany, IN 47151 1147
Aug 06, 2009 Featuring Razor Beam(TM) contact system, LSS Series .635 mm hermaphroditic connector delivers high-speed performance of 10 GHz (single-ended) and 9 GHz (DP). Ultra fine pitch (.635 mm) and slim, low-profile design help conserve PCB real estate. Connectors are available with 5, 10, 20, 30, 40, or 50 pins per row and 6, 7, 8, 9, 10, and 12 mm stack heights. With unmating force of 25 lb, fully shrouded product produces audible click when properly mated.

Seacon Phoenix
Westerly, RI 02891
Aug 04, 2009 Offering chemical resistance, PATC-1000 Series is configurable with single or multiple high-density contacts. Units feature long-term creep and fatigue resistance as well as low flammability and smoke emission characteristics. Helium leak tested to less than 10^-8, hermetically sealed connectors are suited for down hole tools, oil and gas well completion systems, and aerospace and military applications.

Yamaichi Electronics U.S.A. Inc.
San Jose, CA 95134
Aug 04, 2009 Characterized by transfer rates up to 5 Gbps, HF507S Series is available with 21, 31, 41, and 51 pin counts, in 180 or 90°, and in shielded or unshielded versions. Three corresponding cable systems are equipped with adapter which is fitted to HF507S via locking mechanism on side. HF507P Series enables discrete wire connection. YFB and YFT Series offer transfer rates to 10 Gbps and 3 Gbps, respectively, with differential impedance up to 100 W.

Yamaichi Electronics U.S.A. Inc.
San Jose, CA 95134
Aug 04, 2009 Based on 1.27 mm pitch, MatchCon MBP/MBS Series offers wide range of 90° and 180° board connectors in SMT versions and with TH pins. Positioning springs enable male and female contacts to interlock strongly, so that typical fretting of tin-plated contacts can be eliminated through high contact force. Available with pin counts from 6-26, connectors use IDC technology to secure cable.

Phoenix Contact
Harrisburg, PA 17111 0100
Aug 03, 2009 Featuring panel cut-out size of 11 mm, high-density M12 connectors are available as molded cordsets and extension cables, as well as panel feed-through or PCB mounted receptacles. They are available in plug or socket versions and feature SPEEDCON technology, securing with half turn. IP67 compliant connectors suit applications where space must be conserved, such as medical equipment, robotics, printing machines, and industrial cameras.

Samtec, Inc.
New Albany, IN 47151 1147
Jul 29, 2009 Edge Rate(TM) Right Angle Series ERM8-RA/ERF8-RA and Edge Mount Series ERM8-EM/ERF8-EM terminals and sockets offer up to 150 I/Os in single-ended or differential pair configurations, with choice of 10 to 75 positions/row. Suitable for rugged and harsh environments, strips are also offered with optional metal latching system.

King Innovation
O'Fallon, MO 63366
Jul 23, 2009 Suitable for use in UL 1838 low-voltage landscape lighting applications, DryConn® UL 486D Listed Connectors offer optimal performance for low-voltage, waterproof splice protection and direct bury. Models include DryConn Black/White, Black/Gray, Black/Blue, King 4, King 5, King 6, King 9, and DBSR® Medium with strain relief. Wire range for entire line covers No. 22 through No. 6 AWG.

Sullins Electronics Corp.
San Marcos, CA 92079-0189
Jul 15, 2009 Featuring 0.100 in. contact centerline, SFH IDC Series Socket and SIP IDC Series DIP Plugs have current rating of 1 A/contact and are offered in 3/6 through 32/64 dual positions. Devices mass terminate single-layer, 0.050 in. 28 AWG flat ribbon cable in one step. Sockets are available with strain relief and polarizing keys to ensure proper mating alignment. Operating from -40 to +105°C, units feature dielectric voltage of 500 Vac and max contact resistance of 30 mW.

Fujitsu Components America, Inc.
Sunnyvale, CA 94089
Jul 15, 2009 RoHS-compliant, vertical surface-mount DDR2 DIMM socket connector, FCN-078J series uses precision stamping and molding technology to achieve 0.1 mm coplanarity before and after reflow. Available with footprint of 22.7 x 140 mm, 240-position unit has operating temperature range between -55 to +85°C, voltage rating of AC 25 V and maximum current rating of 0.5 A/contact. Suitable applications include blade servers, switches, routers, telecom racks, and test and measurement equipment.

Samtec, Inc.
New Albany, IN 47151 1147
Jul 08, 2009 Designed for perpendicular and co-planar applications, .8 mm pitch Right Angle (EFM8-RA/ERF8-RA) and Edge Mount (ERM8-EM/ERF8-EM) terminals and sockets offer up to 150 IO in single-ended or differential pair configurations with choice of 10-75 positions per row based on orientation. They feature Edge Rate(TM) contacts, which minimize broadside coupling and decrease crosstalk between adjacent contacts. Suited for harsh environments, strips feature optional rugged metal latching system.

AutomationDirect.com
Cumming, GA 30040-9905
Jul 03, 2009 ZIPport(TM) panel interface connectors mount on outside of electrical control panel boxes and act as pass-through connections, allowing operator to interface with PLCs and other programmable devices without opening control box. Units include standard reset 3 A circuit breaker and are available with single/duplex/GFCI power outlets as well as no-power option. Designed for frame sizes 6-48, communications connectors available include D-sub, RJ45, RJ12, USB, Ethernet, and Data Highway.

Hartmann Electronic
Springfield, OH 45505
Jul 02, 2009 Offering 19 VXS slots and 2 switch slots, VMEbus Switched Serial backplane connects every switch to every VXS connector. Slots include 1 VME64x slot and 18 payload slots which can be connected, with slots J1/J2 being VME64x slots and J0 either VXS or payload slot. Transmission rate is 2.5 GB/sec for every slot simultaneously. Both VITA 41.1, for Infiniband, or VITA 41.2, for rapid I/O, are possible.

Bomar Interconnect Products
Ledgewood, NJ 07852
Jul 02, 2009 With 75 W interfaces rated to 8 GHz and engineered to only mate with 8 GHz parts, BMR series female type connectors are designed to mount to underside of PCB to support optimal grounding and inductance. They feature open-top design and contact pin placement to enable low overall capacitance, and ensure integrity of split satellite signals when employed in RF circuits. Parts are manufactured of precision-machined brass with gold-plated contacts to support low return loss.