Telegartner, Inc.
Franklin Park, IL 60131
Feb 13, 2007 Offering alternative to SMA connectors, QLS Series enables connection without need for tooling. Locking mechanism ensures high butt contact force on outer conductor, which is normally only achieved with threaded coupling mechanism. Rated for greater than 200 mating cycles, connectors feature insertion force of 30 N and interface contact force greater than 200 N. With working voltage less than 500 V/50 Hz, units operate up to 6 GHz, or 18 GHz if attached to semi-rigid cable.

ITT Industries, Cannon
Santa Ana, CA 92705-5612
Nov 03, 2006 Developed for coax, fiber, and HV applications, VEAM CIR Series connectors can function as electrical, optical, or pneumatic connectors. Coaxial CIR connectors accept most popular RG cables, while fiber styles come with single- or multiple-fiber termini. Other connector configurations include high voltage, twin- or tri-axial with size 4 or 8 contacts, and RFI/EMI in which grounding fingers on plug connectors provide 360º plug-to-receptacle shield integrity.

Harting KGaA
  Germany
Aug 01, 2006 Utilizing up to 8 D-Sub crimp contacts, Han® High-Density-Quintax Connector can be used for many applications with shielded cables, including redundant MVB bus system. With one Han-E® crimp contact in coaxial position, Han® E-Coax Connector features impedance of 50 Ohms and is suited for use with large diameter coaxial cables.

Tyco Electronics Corp.
Harrisburg, PA 17105-3608
Jun 27, 2006 Free of lead and cadmium, RAYCHEM SolderSleeve devices provide means to splice and terminate wire and cable. Products, comprised of engineered solder preforms, flux, and cross-linked heat shrinkable sleeve, provide completely soldered, strain-relieved, and encapsulated termination. One-step process facilitates installation. Devices are suited for use in coaxial, wire to wire termination and splicing, ground termination, and wire to cable shield applications.

Murata Electronics North America, Inc.
Smyrna, GA 30080
May 11, 2006 Manufactured in 2.0 x 2.0 mm package with 0.6 mm height and 1.2 mm max mating height, miniature HSC series board connector and cable assembly allows engineers flexibility throughout design process and alleviates concerns with point to point microwave connections. RoHS-compliant unit has dc to 6 GHz operating frequency and comes in various cable configurations and lengths. Test probes are available to interface with cable or connector to confirm signal integrity.

Samtec, Inc.
New Albany, IN 47151 1147
Jan 27, 2006 Ganged RF cable plugs are available for terminating 2, 4, 6, or 8 wires simultaneously with choice of standard 26 AWG coax cable or high performance 26 AWG coax cable with 1.4 dielectric constant. Standard assemblies can be specified with wire lengths from 6 in. to 1 m. Ganged RF board-to-board jacks and plugs are available for terminating 2, 4, 6, or 8 connectors simultaneously. Standard board spacing is 4.5 mm. Captive screw receptacles are available on jacks.

Harting KGaA
  Germany
Nov 23, 2005 With signal transmission up to 4 GHz, Mini Coax Single Row System features 3 contacts, 8 mm centerline distance, and 80 dB isolation. Right-angled modules are also available as pre-assembled, and both versions can be pressed in flat rock dies. Mini Coax connectors are suitable for equipment within cellular telecom infrastructure allowing for minimal slot distance of 15 mm.

Amphenol Corp., Amphenol Aerospace
Sidney, NY 13838
Jul 06, 2005 Suited for MRI applications, multi-pin Amphe-Lite Series features corrosion-resistant composite housings with IP67 rating when mated. Non-magnetic contacts are available for power, signal, and coax applications ranging from single Twinax contact up to 128 size 22D contacts for crimping 22–28 AWG. Standard crimp contacts can be terminated to discrete wires, and PC tail contacts are available for termination to PCBs or flex circuitry.

Aviel Electronics
Las Vegas, NV 89118
Apr 22, 2005 Providing functional equivalents for obsolete RF coaxial connectors and adapters, replacements come in brass, stainless steel, and aluminum body materials with brass, beryllium copper, of phosphor bronze contacts. Styles include SMA, SMB, SMC, MCX, and other miniature series interfaces as well as larger interfaces such as BNC, TNC, N, C, SC, HN, LT, and LC. Bodies are produced in straight, right-angle, bulkhead, flange mount, blind-mate, and tri-axial configurations.

Sabritec
Irvine, CA 92614
Mar 01, 2005 Rear body of Torque Isolation Coaxial Connector is extended to alleviate stress against cable to connector solder joint. Slotted extension straddles semi-rigid cable, confining it to its initial direction while increasing mutual solder surfaces between cable and connector body.

Aliner Industries, Inc.
Taipei 242  Taiwan
Jan 24, 2005 Suited for wireless, handheld, mobile devices such as RFID readers, smart phones, and GPS/PDAs, MCII RF connectors work as internal data connectors and/or external antenna connectors. Products measure 3.10 x 3.70 x 2.10 mm from board. Available in PCB/edge mount, 50 ohm connector complies with RoHS requirements and features snap-on coupling interface. It delivers VSWR less than 1.35 up to 6 GHz with insertion loss of -0.28 dB.

Aliner Industries, Inc.
Taipei 242  Taiwan
Dec 29, 2004 MC Card Connectors are available in 3 types of RF antenna switches, and straight/right angle plugs and jacks for all cable sizes. Units feature minimal board height of 3.60 mm for edge mount version and 7.60 mm for PCB mount version. All 50 ohm connectors are in compliance with RoHS requirements, delivering VSWR less than 1.35, insertion loss of -0.28 dB, and durability of greater than 3,000 mating cycles.

Aliner Industries, Inc.
Taipei 242  Taiwan
Dec 22, 2004 Series DFC MMCX 25-00X, 25-10X, and 25-30X include 360° rotational positive locking mechanism and non-slotted outer conductor designed for up to 6 GHz. Both plug and jack are available in edge mount, straight PCB mount, and SMT including straight and right angle configurations. Suited for automotive, M2M Telemetry, 3G, and GPS applications, 50 ohm connectors are in compliance with RoHS requirements, delivering VSWR less than 1.25 and insertion loss of -0.25 dB.

Aliner Industries, Inc.
Taipei 242  Taiwan
Dec 22, 2004 Suited for applications up to 6 GHz, in-line SSMCX Connectors feature minimal height of 2.50 mm and length of 7.85 mm. Shock resistant, cable-to-cable units deliver VSWR of 1.30 max at 1–3 GHz and 1.5 max at 3–6 GHz. Insertion loss is -0.26 dB. Compliant with RoHS requirements, snap-on connectors are suited for high-density mobile electronic equipment such as GSP/PDA, mobile wireless AP, PC notebook, and GSM/GPRS modules.

Sabritec
Irvine, CA 92614
Sep 16, 2004 Series RF Coaxial MDCX Connectors feature multipin connectors that offer VSWR of 1.25:1 up to 20 GHz. Each MDCX contact has maximum overall diameter of 0.125 in. fitted into low profile metal housing. Insert arrangements are available in 4, 6, 8, and 10 way coaxial assemblies with mixed signal and power contacts offered in hybrid layouts. Connectors suit test and measurement, burn-in, and high power applications.

Times Microwave Systems
Wallingford, CT 06492 5039
Aug 16, 2004 Suited for LMR-240 low-loss coaxial cable, QMA EZ non-solder connectors provide snap-on version of SMA interface. They are available in straight and right angle versions, designated EZ-240-QMAM (3190-1533) and EZ-240-QM-RA (3190-1539), respectively. LMR® cables are flexible, non-kinking, low-loss RF transmission line cables that are suitable for use as antenna feeders, system jumpers, and interconnects.

Cinch Connector Div., Labinal Components & Systems Inc.
Lombard, IL 60148
Jul 20, 2004 Series BBFâ„¢ Broadband Frequency Connectors utilize 3-beam, high-force contact to create gas-tight electrical connection with low return loss and VSWR of 1.2 at 1.5 GHz. Available in right-angle board configurations and female-to-female adapters, F-style products mate with wide range of cable connectors at operating temperatures from -40 to +105°C. Ribbed posts grip pcb and keep connector from rocking during wave solder operation. Connectors suit high-bandwidth voice/video/data applications.

Spinner North America
Norcross, GA 30071
Mar 12, 2004 Made of silver-plated brass, Model 756404 7-16 Connector Saver Adapter operates in DC to 8 GHz bandwidth with intermodulation better than -165 dbc and max VSWR of 1.06. Adapter is suited for high caliber laboratory test solutions as well as multiple production and field applications.

RF Industries
San Diego, CA 92126 4202
Dec 30, 2003 Quick disconnect series coaxial interfaces include adapters, connectors and cable assemblies for BNC, F, N, TNC, and Mini-UHF applications. For low operating frequency requirements, all interfaces feature nickel-plated bodies and Teflon or Delrin insulation.

RF Industries
San Diego, CA 92126 4202
Dec 10, 2003 Model RFA-4019 expansion kit contains 27 adapters including MCX, MMCX, SMB, 7–16 DIN, reverse polarity SMA, and reverse polarity TNC adapters. All are silver-plated, machined brass with gold-plated contacts and Teflon insulation. Foam-lined case features enough slots and cavities to accommodate full line of Unidapt® products. Mega Kit Model RFA-4022 contains all 74 pieces.