Bomar Interconnect Products    Ledgewood, NJ 07852
Apr 19, 2012 Developed for employment with PCMICA cards in wireless applications, 50 ohm BNC E-Snap(TM) conectors have small protrusions within slot to allow devices to snap firmly into solder-pasted holes as they are slid onto PCB. Construction promotes board retention and RF performance without use of adhesives. Suited for dense packaging arrangements, miniature connectors have gold-plated contacts, come in male or female versions, and offer repeatable performance to 18 GHz standard or 20 GHz optional.

Radiall    Chandler, AZ 85226
Jul 06, 2011 With 2-piece design that facilitates crimping on cable, composite 75 ohm BNC HDTV connector accommodates studio-quality broadcast production to video conferencing equipment applications. It handles data rates to 3 Gbps or higher while meeting/exceeding SMPTE 292M and 424M standards. Gold plated center and outer contacts promote electrical performance with frequency range up to 6 GHz and return loss of -32 dB at 3 GHz. In-field durability is assured via 1,000 min mating cycle rating.

Belden, Inc.    University City, MO 63105
Apr 13, 2011 Brilliance® HD BNC Connectors provide better than -20 dB return loss performance through 4.5 GHz and are designed for use with Brilliance Precision Video Coaxial cables. Three-piece broadcast connectors feature 360° compression rings for optimal holding strength and weather resistance. Screw-on locking collar aligns connector and locks bayonet nut in place, and devices also have non-blind entry that ensures center conductor is properly inserted into center pin.

Ideal Industries, Inc.    Sycamore, IL 60178
Jun 29, 2010 Constructed of nickel-plated brass for corrosion resistance and field durability, 75 W RG-59 and RG-6 connectors cover dual-shield Plenum-rated coaxial cables with compression-style sleeve that adapts securely to wide range of outer jacket cable diameters. Gold plated center and outer contacts provide electrical performance with frequency range up to 3 GHz, while colored cable bands allow for easy coding of video signals. Tight fit stops moisture from entering into cable.

RADIALL Inc    Chandler, AZ 85226
Jan 25, 2010 Suited for broadcast transmission systems, BNC 75 W HDTV Coaxial Connectors handle data rates up to 3 Gbps while supporting SMPTE 292M and 424M standards. Units have gold-plated center and outer contacts, and are intermateable with standard 50 and 75 W BNC products. Providing 1,000 mating cycles, connectors are field installable on most coaxial cables using hand-crimping tools and are available with colored cable boots for coding of video signals.

RADIALL Inc    Chandler, AZ 85226
Aug 19, 2009 Field installable on most analog and digital coaxial cables using hand crimping tools, BNC 75 W HDTV Connectors feature gold-plated center and outer contacts, which provide electrical performance up to 6 GHz. Units can handle data rates up to 3 Gbps or higher to support SMTPE292 and SMTPE424 standards. Connectors are suited for cameras, video recorders, and routers, as well as satellite transceivers, aircraft audio systems, and test instrumentation.

Neutrik AG    Lakewood, NJ 08701
Apr 14, 2009 Sweep tested to guarantee jitter-free transmission, even with uncompressed HD 1080p signals, the rearTWIST BNC exhibits return loss values up to 4.5 GHz, exceeding SMPTE requirements. Connector features machined body with a true 75 W ergonomic design that offers maximized connection comfort in high-density applications.

Amphenol Connex    Moorpark, CA 93021
Dec 11, 2008 Supplied standard with gold flash body plating as part No. 112740 or optionally with nickel plating as part No. 112740-10, BNC end launch bulkhead receptacle has low-profile design that conserves panel real estate. It is precision-machined from brass and features PTFE insulator supporting temperatures up to 260°C. Suited for broadcast and audio/video applications, connector achieves return loss of better than -35 dB at 3 GHz. Recommended PCB thickness is 0.062 in.

Vista-CCTV    Wokingham RG41 5TS  United Kingdom
Oct 15, 2008 Optimized for use with Vista RG59 and URM70 coax cables, Vista BNC Connectors can be used to connect various parts of CCTV system to provide optimum signal transmission. They are available individually, or in 100 connector box kits.

Regal Electronics, Inc.    Sunnyvale, CA 94086
Aug 01, 2008 Built on BNC (Bayonet Neill Concelman) configuration, BNCM31202-LM-75R with low profile, gold plated metal body is suited for test equipment, lab instrumentation, radio frequency patch panels, and broadcast and surveillance video applications. RoHS compliant mini connector with classic through hole/PC mount configuration has operating frequency range in excess of 1.5 GHz and impedance of 75 W. Unit also features solderable mounting tabs for connectivity.

Telegartner, Inc.    Franklin Park, IL 60131
May 08, 2007 True 75 Ohm BNC Connectors feature transmission data rates of 25 Mbps per channel. Straight crimp plugs are available in 5 different models, each designed to accept specific Belden broadcast cable, with return loss values of 36-42 dB for 1 GHz, 31-33 dB for 2 GHz, and 29-33 dB for 3 GHz versions. Adapters, available in 3 models, feature values of 30-32 dB for 1 GHz, 36-38 dB for 2 GHz, and 30 dB for 3 GHz versions.

Belden    Richmond, IN 47375
Feb 22, 2007 Targeting professional broadcast and entertainment industry, BNC and RCA Connectors come in straight and right angle versions with solid, one-piece construction. Units are plated in nickel or gold, with gold-plated center pins. Two independent compression points seal and hold connector onto miniature coaxial cable to ensure electrical contact. Both connectors offer cable retention force of more than 40 lb and center conductor holding force of more than 150 g.

Pomona Electronics    Pomona, CA 91766 3835
Jan 03, 2007 Housed in pistol-grip case, Multi-RF Direct Adapter Kit contains 6 BNC, 2 TNC, 16 SMA, and 2 Type N adapters. All are precision-machined brass with tarnish-resistant nickel plating. Male center pins are gold-plated brass and female centers are gold-plated, heat-treated beryllium copper. All insulation material is high-density PTFE. Adapters allow direct adaptation without intermediate couplers, minimizing signal loss and reflection.

Bomar Interconnect Products    Ledgewood, NJ 07852
Jul 18, 2006 Suited for studio broadcast equipment, 75 ohm BNC Connectors feature extremely low 1.032 VSWR and return loss of -36 dB at 4.5 GHz. Miniature quick connect/disconnect RF devices are engineered to meet or exceed professional broadcast sector's mechanical, electrical, and environmental standards. Made of precision-machined brass with gold-plated contacts and black nickel-plated body, connectors can be used to terminate RG-6 and RG-59 coaxial cables.

Pomona Electronic    Everett, WA 98204
Jul 05, 2006 Built for safe operation, IEC (International Electrotechnical Commission) insulated BNC adapters allow for attachment in 500 V CAT 1 applications. Specific models include IEC Insulated BNC male 50 cable (model 72926-C-40); IEC Insulated BNC to stackable/retractable 4 mm plugs (male model 72908, female model 72909); and IEC Insulated BNC to 2 male banana 4 mm plugs (female model 72911, male model 72910).

Seco-Larm    Irvine, CA 92606-5012
Jan 11, 2006 Featuring snap-in case, ENFORCER EVT-PBM-V17 with male BNC connector and EVT-PBM-V27 with female BNC connector provide way to connect CCTV cameras and accessories to monitor, multiplexer, or video recorder at up to 2,000 ft away. User plugs Cat 5 or Cat 5e cable with RF-45 male plug into back of balun, then snaps balun into modular single-gang wall plate with 9/16 x 5/8 in. hole. Baluns support range of video formats including RS170, NTSC, PAL, SECAM, and CCIR.

Bomar Interconnect Products    Ledgewood, NJ 07852
Apr 14, 2005 Panel-grounded, dual BNC connector, Model X-2â„¢ is nickel-plated zinc with gold-plated contacts and gray insulation outer cover. With optional metal back cover, unit offers 100% full shielding. Featuring quick-connect characteristics, connector is provided with impedance of 50 or 75 ohms, and in vertical or right angle stacked configurations. It offers VSWR to 500 MHz and meets or exceeds mechanical, electrical, and environmental standards for broadcast connectors.

Pomona Electronics    Pomona, CA 91766 3835
Nov 04, 2003 Series 6700/01BNC within-series adapters permit parallel routing of cables, either horizontally or vertically. Series 6717/18/19 coaxial connectors with adapters allow mounting of 2 BNC connectors in same PCB space. Both types are rated at 500 V with 5,000 mW insulation resistance, 50 W impedance, and 0–4 GHz frequency. BNC within-series adapters meet common BNC/F connector-interface requirements. They are rated at 500 V with 75 W impedance and 0–500 MHz frequency.

Pomona Electronics    Pomona, CA 91766 3835
Nov 03, 2003 High-performance broadcast/HDTV-quality connector models 6702/03/04/05 are designed to meet broadcast standards with reduced return loss for signal clarity. Made with gold-plated brass center contacts, they offer true 75 ohm impedance and are accurately matched to Belden cables. Connectors are precision machined from brass and offer black nickel plating and high-density PTFE insulator material for maintenance of perfect dielectric constant.

Nemal Electronics International, Inc.    North Miami, FL 33161
Oct 21, 2003 Terminated using industry-standard crimping tools, NE8000 Series connectors have knurled body design and contact captivation to insure proper contact placement. Brass-bodied connectors are nickel-plated, have gold-plated contacts, and Teflon insulation. Characteristics include 75 ohm impedance, 5,000 megohm insulation resistance, and return loss from -25 db to 2 GHz. Contact retention is 6 lb min, and engagement force is 2.5 lb max.