Power-One, Inc.    Camarillo, CA 93012
Dec 31, 2009 Designed for commercial use, PVI-CENTRAL-150-US-480, PVI-CENTRAL-200-US-480, PVI-CENTRAL-250-US-480, and PVI-CENTRAL-300-US-480 provide outputs of 150, 200, 250, and 300 kW, respectively. Inverters offer 96% CEC efficiency and provide full power rating up to 40°C. Master-Slave configuration allows internal redundancy with no functional impairment in case of failure. When PV array is not grounded, PVI-CENTRAL units can be configured in Multi-Master Mode with multiple MPPT controllers.

Littelfuse, Inc.    Des Plaines, IL 60016
Dec 24, 2009 Housed in 1.25 x 1.0 x 0.5 mm µDFN package, ±8 kV Model SP1010-04UTG has capacitance of 3.5 pf for high speed buses, while ±15 kV Model SP1011-04UTG offers 7 pF of capacitance for optimized ESD protection. Both 4-channel arrays are RoHS-compliant and suitable for cell phones, smart phones, PDAs, portable navigation devices, digital cameras, netbooks, and portable medical devices.

Pentek Inc.    Upper Saddle River, NJ 07458
Dec 08, 2009 Suitable for connection to HF or IF ports for communications, radar, telemetry, and medical systems, Model 71620 features three 200 MHz 16-bit TI ADS5485 A/Ds delivering input bandwidth of 350 MHz, and dual-channel 800 MHz 16-bit TI DAC5688 D/A providing 2 wideband analog outputs. Multichannel XMC module supports Gen 2 PCI Express as primary control and data streaming interface. With lane widths up to x8, data can be moved on and off board at rates up to 4 GB/sec.

SICK, Inc.    Minneapolis, MN 55438
Dec 07, 2009 Offering measurement range up to 600 bar, PBS electronic pressure switch integrates IO Link which permits automatic sensor parameterization and measurement data collection. When exchanging devices, any necessary parameter changes can be carried out automatically within msec without erroneous manual adjustments. Pressure measurement can also be conducted directly on pressurized container. Compact switch combines electronic switching outputs, analog output, and display in rotating housing.

Altera Corporation    San Jose, CA 95134
Dec 04, 2009 Supporting mainstream serial protocols, Cyclone® IV series responds to bandwidth requirements driven by demand for mobile video, voice, and data access. Cyclone IV GX devices, supplied in packages down to 11 x 11 mm, have up to 150K logic elements, up to 6.5 Mbit RAM, 360 multipliers, and 8 integrated 3.125 Gbps transceivers. Cyclone IV E devices offer features suited for power-sensitive applications such as handheld software-defined radio.

Lattice Semiconductor Corp.    Hillsboro, OR 97124
Dec 04, 2009 Featuring DSP capacity of 320 18 x 18 multipliers, 6.8 Mbits of memory, and up to sixteen 3.2 Gbps SERDES channels, LatticeECP3(TM)-150 is suited for complex Wireless Remote Radio Heads such as MIMO-based RF antenna solutions. Device also provides Wireline Access developers with low-power Ethernet, SONET, and PCI Express solutions. FPGA is supported by ispLEVER® v8.0 design suite, which provides tools for project management, IP integration, design planning, and power analysis.

Electro Standards Laboratories    Cranston, RI 02921 3403
Nov 19, 2009 Model 7288SS DB25, 4-port Code Operated Switch allows sharing of one device among 4 separate devices on ports 1, 2, 3, and 4. Network switch maintains last set position on power loss and returns to position upon restoration of power. Unit is controlled using remote commands via data stream of common port to switch it and change lock state. Pins 1-8 and 20 of DB25 interfaces are switched and all DB25 ports function as DCE ports.

AVX Corp.    Myrtle Beach, SC 29578
Nov 18, 2009 Housed in 0402 case, 0.5 pF AntennaGuard SPV Series MLV provides 1 nS response time to ESD strikes and can withstand 100 successive strikes at 8 kV. Bi-directional transient voltage suppressor delivers 0.47 pF capacitance at 15 V rating, providing one-chip solution for protecting high-speed digital interface, HDMI, analog sensor, Flex Ray, GPS antenna, and RF amplifier circuit applications against ESD events.

Turck USA    Minneapolis, MN 55441
Nov 17, 2009 Offering both relay and solid-state switch models, MZB Series limits excess energy before it reaches hazardous area. Units feature removable terminals, bussed power feed, and channels as small as 6.3 mm wide. Each channel is fitted with 2 stages of pulse-tested Zener diodes and infallible terminating resistor. If electrical fault occurs in non-hazardous area of barrier, Zener diodes limit voltage available to hazardous area circuits, while series resistance limits current.

Altera Corporation    San Jose, CA 95134
Nov 12, 2009 With 36 transceiver channels operating from 2.488-11.3 Gbps, Stratix® IV GT EP4S100G2 FPGAs meet bandwidth requirements for next-generation framer, MAC, bridging, and switching applications for 100-Gigabit Ethernet and 100-Gigabit Optical Transport Networks. Single-chip devices meet IEEE 802.3 standard for 100G systems and offer jitter performance to meet 10G, 40G, and 100G protocol specifications. Other features include 0.95 V core power, noise filtering, and 230K logic elements.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Oct 27, 2009 Quad-precision, thin film SMT resistor networks in QFN series are contained in 20-pin no-lead package with 0.65 mm pitch. They offer tolerances to ±0.05% and stable film and performance characteristics of 500 ppm at +70°C for 2,000 hr. Resistance values can be different for each resistor in networks and range from 100 W/resistor to 500 kW/package. Operating in temperatures from -55 to +125°C, products are qualified to Moisture Sensitivity Level 1 per J-STD-020 and are flame-resistant.

Altera Corporation    San Jose, CA 95134
Oct 26, 2009 Intended for high-end digital applications, 40 nm Stratix® IV E FPGA Series features 4 devices ranging in density from 230 to 820 K logic elements. Model EP4SE820 provides 650 K registers and 23.1 Mbits of 600 MHz embedded memory, as well as 960 18 x 18 multipliers running up to 550 MHz, 1,120 I/Os, and 1.25 Gbps LVDS performance. Devices are suitable for ASIC prototyping and emulation, wireline, wireless, military, and computer and storage applications.

Altera Corporation    San Jose, CA 95134
Oct 26, 2009 Providing instant-on, non-volatile advantage, MAX II® CPLDs come in packages as small as 5 x 5 mm and are rated for commercial (0 to +85°C) and industrial (-40 to +100°C) temperature ranges. Rated for zero standby power, products feature in-system programmability and power consumption as low as 25 µA. Density and I/O combination suit power-sensitive applications spanning industrial, computer, and office automation as well as medical and consumer devices.

Altera Corporation    San Jose, CA 95134
Oct 26, 2009 Providing 230 K logic elements, 13.9 Mbits of embedded memory, and 1,288 18 x 18 multipliers, 40 nm Stratix® IV GX EP4SGX230 FPGA is suited for variety of high-speed backplane and cabling interfaces, chip-to-chip interconnects, and protocol-bridging applications. Embedded transceivers offer optimal jitter performance at data rates from 600 Mbps to 8.5 Gbps. They support PCI® Express Gen1 and Gen2, Serial RapidIO®, Gigabit Ethernet, XAUI, CPRI, CEI 6G, GPON, SFI-5.1, and Interlaken.

Littelfuse, Inc.    Des Plaines, IL 60016
Oct 26, 2009 With operating voltage up to 510 Vac, surface mount SM7 Series provides over-voltage protection and transient suppression, and is designed for continuous operation across AC power lines. RoHS-compliant device is based on radial 7 mm internal varistor element and is housed in nylon molded package with tin-plated terminal. Operating at ambient temperatures up to 85°C with peak pulse current of 1,200 A, unit is suitable for AC power meters, detectors and sensors, plug-in cards, and remote controls.

Littelfuse, Inc.    Des Plaines, IL 60016
Oct 16, 2009 Able to withstand peak surge current up to 22 kA at single 8/20 µs pulse, Ultra MOV(TM) 25S series can protect against lightning striking interference and abnormal power source from incoming power lines. Standard 25 X 25 mm square, radial lead package has straight leads and is RoHS-compliant. Supporting operating voltages from 115-750 Vac, product is also available as phenolic coated option that enables operating temperatures up to 125°C.

AVX Corp.    Myrtle Beach, SC 29578
Oct 12, 2009 Designed to clamp transients and filter EMI, 0201 TransGuard® Series provides protection to sensitive circuits from over-voltage conditions caused by ESD, lightning, NEMP, and inductive switching. Device can also withstand up to 1,000 strikes at 8 kV contact with sub 1 nS response time for ESD events and leakage current of less than 5 µA at rated voltage. With 5.6 V rating, miniature bi-directional transient voltage suppressor provides minimal signal distortion.

Wolfson Microelectronics plc    Edinburgh EH11 2QB  United Kingdom
Oct 12, 2009 Model WM8320 power management IC (PMIC) features 4 DC-DC synchronous regulators, 2 of which are 1.2 A regulators that incorporate BuckWise(TM) technology, which allows PMICs to adapt to shifts in power requirements as functions are switched on/off by user. Measuring 7 x 7 mm, it integrates 10 LDOs and two 1 A regulators that can be grouped together for combined 1.6 A output. Unit's EEPROM interface lets product designers override one-time programmable memory as many times as desired.

AVX Corp.    Myrtle Beach, SC 29578
Oct 07, 2009 Rated at 18 V, UltraGuard Multilayer Ceramic Varistors feature non-linear, bi-directional voltage-current characteristics similar to back-to-back zener diodes with EMC capacitor in parallel. Zinc Oxide-based units offer multi-strike capabilities and will survive 1,000 strikes at 15 kV contact ESD. Available in low and high capacitance versions ranging from 40-3,000 pF, varistors are suited for transient protection applications where extended battery life is required.

DuPont Microcircuit Materials    Research Triangle Park, NC 27709
Sep 30, 2009 Targeted at PV cell and module manufacturers, environmentally friendly DuPont(TM) Solamet® PV173 photovoltaic metallization paste for crystalline silicon solar cells provide high adhesion, and enable advanced fine line designs down to 80 microns. It is compatible with lead free Solamet® PV502 and PV505 tab silver pastes, and PV38x aluminum pastes.