Xilinx Virtex-5 SXT FPGAs Achieve PCI Express v1.1 Compliance
Proven solution enables users to rapidly adopt industry's fastest 65nm FPGAs with integrated low power endpoint blocks for PCI Express and serial transceivers SAN JOSE, Calif., May 23 / - Xilinx, Inc. (NASDAQ:XLNX), the world's leading supplier of programmable solutions, today announced that its XtremeDSP(TM) Virtex(TM)-5 SXT FPGAs have passed the latest PCI Express-® Endpoint v1.1 base...
Read More »Controller suits AdvancedTCA and MicroTCA platforms.
Based on Wintegra Winpath2 Processor technology, Model ATMIV AdvancedMC broadband communication controller offers 4 OC3/STM-1 or 2 OC12/STM-4 trunks and is suitable interface to process ATM and IP signaling and bearer traffic. Board and driver provide AAL2/5 to UDP/IP interworking, IP routing and forwarding over ATM, AAL2, and AAL5 termination, and AAL2 and AAL5 switching. High bandwidth carrier...
Read More »
Right-Angle Connectors are in compact size.
With height of .295 in. off PCB, LPH(TM) Low-Profile Hybrid Connector comes with isolated upper and lower contacts that allow for use of power and return signals in same bay to save board space. Available with 4-10 power blades that are rated up to 30.0 A per contact and 12-40 signal contacts, it is suited for use in power supplies, servers, routers, storage, industrial controllers, 1 and 2 RU...
Read More »Multimedia Applications Processor expands design options.
Optimized for mobile consumer and industrial applications, i.MX27 combines Smart Speed(TM) technology, H.264 hardware encoder/decoder, USB, Ethernet, security features, and ARM9(TM) core. Offering video acceleration and applications software in single chip helps increase functionality while reducing power drain and footprint. Able to capture video and play it back in real-time, 32-bit processor...
Read More »
Choosing the Best Industrial Facial PPE Supplier: 5 Key Factors
Paulson is an industry leader in PPE production, most notably face and eye protection. Learn more now about what factors are most important to consider when choosing a PPE supplier.
Read More »Thermacut-® Continues Expansion of EX-trafire-® Product Line
Thermacut, Inc. has introduced a unique consumables team approach for replacement plasma cutting electrodes and nozzles applicable to HyperthermÃ-® HPR 130Ã-® and HPR 260Ã-® Torches. By matching Thermacut's Silver EX-Ã-® Electrodes with their recently introduced Tungsten EX-Ã-® Nozzle, testing has shown improved performance and product life up to four times longer than...
Read More »STMicroelectronics Samples 65nm Multi-Standard Hard Disk Drive Physical Layer IP
Geneva, May 2, 2007 - STMicroelectronics (NYSE: STM) today revealed the industry's first successful fabrication of the next-generation 65nm serial-interface MIPHY (Multi Interface PHY) Physical Layer interface IP (Intellectual Property). ST designed the macro-cell to be integrated with other functions into low power System-on-Chip (SoC) devices supporting both 3 Gbps and 6 Gbps Serial ATA (SATA)...
Read More »ESD-Protection Array has less than 1 pF typical capacitance.
Model VBUS054B 4-line diode array protects dual high-speed USB ports or up to 4 other high-frequency signal lines against transient voltage signals up to 15 kV. It features typical leakage current of less than 0.1 Ã-µA at maximum working voltage of 5 V. Bus port-protection array offers breakthrough voltage of 6.5 V at 1 mA, and maximum clamping voltage of 15 V at 3 A. Array comes in leadless...
Read More »Wireless Thermocouple Node includes six channels.
Supporting type J, K, R, S, T, E, and B thermocouples, TC-LINKÃ-®-6CH 2.4 GHz 802.15.4 can transmit real-time data from multiple nodes to single base station or store up to 300,000 data points in on-board 2 MB non-volatile flash memory. It offers line-of-sight wireless communications range of 70 or 280 m with standard and high-gain antennas, respectively. Node includes 24 bit delta-sigma A/D,...
Read More »Power Connectors offer up to 15 A of current in molded body.
Rated for 600 Vac/Vdc, 3- and 4-pin M16 powerfast connectors are suited for conveyor, small motor, and material handling applications. Cord sets include fully encapsulated mating receptacles with nickel-plated brass housing and Ã-½ in.-14 NPT, 3/8 in.-18 NPT, M18, and M20 mounting threads. Available with tray rated, exposed run PVC flexlifeÃ-® cable, connectors offer IEC IP 67 protection....
Read More »
Compression Tools assemble variety of connectors.
Featuring Split Jaw technology, Models CT2-AS and CT2-AS-EX can assemble 59, 6, 7, and 11 F compression type connectors as well as RCA, IEC, and Mini connectors. Available in 2 distinct colors for identification of connector use, Model CT2-AS features spring loaded handles and push button handle lock. Spring loaded split jaws position cable and connector for insertion/removal and can be used...
Read More »
Does Your Parking Lot Make a Good First Impression?
To enhance its appearance by removing oil stains, Terminator-HSD uses micro bacteria to remove the stain without harsh chemicals, acids, or detergents. Check out the video to learn more.
Read More »
