New Electronic Components & Devices Products

Laser Amplifier delivers over 3.5 mJ pulse energy at 1 kHz.

Available in choice of either less than 50 or 100 fsec pulse width models, Libra(TM) HE one-box ultrafast Ti:Sapphire amplifier is offered with standard pulse repetition rate of either 1 or 5 kHz at 800 nm. Utilizing E-2 Engine(TM) regenerative amplifier design, unit offers beam quality with M2 less than 1.3, and output stability of less than 0.5% rms. Unit is suited for power-heavy applications...

Rectangular Connectors accept LuxCis(TM) optical termini.

Available in aluminum or corrosion resisting steel, Raychem MTCT modular rectangular connectors accept standard ARINC 801 LuxCis(TM) optical termini in compact, lightweight design. Four-position MTCT connectors feature quarter-turn bayonet quick disconnect or jackscrew mating hardware, keying, and fluorosilicone interfacial seal. Enhanced mating interface ensures optical alignment of termini, and...

Welding Electrodes minimize cracking and corrosion.

SelectAlloy 307T0-3 contains weld metal composition of 21% chromium, 10% nickel, 4% manganese, and 1% molybdenum and is utilized to weld armor plate as well as join carbon and low alloy steels to SS. It is also suited for surfacing or welding over gaps. Composed of 20% chromium, 10% nickel, and 0.7% columbium, SelectAlloy 347T0-3 is designed to weld Types 321, 347, and 348 SS. Self-shielded,...

RF Modules optimizes space, functionality in mobile devices.

TRIUMF (TriQuint Unified Mobile Front-end) Module(TM) series streamlines RF footprint for mobile device manufacturers designing next-generation 3G/4G products by combining GSM/GPRS/EDGE and WCDMA/HSPA/LTE transmit functionality. Used in place of multiple discrete modules to conserve board space, modules support 3G and 4G Long Term Evolution (LTE) standards and feature Quad Band...

Access Hardware: Medical Solutions

This guide will provide a closer look at solutions for medical equipment and devices

GPS LNA Module features integrated SAW filter.

Designed for use in GPS receivers, Model RF2815 integrates low noise amplifier with low noise figure of 0.85 dB, surface acoustic wave filter, and supporting components in 3.3 x 2.1 x 1.0 mm, RoHS-compliant module. Unit features 13.5 dB gain, +8 dBm IIP3, and CMOS-compatible shutdown mode. Current consumption is tunable via single resistor. With both cellular- and PCS-band rejection...

APR Copper Clad Resistor Laminate suits flex applications.

All-polyimide composite, PyraluxÃ-® APR copper clad resistor laminate, features double-sided construction of polyimide film bonded to copper foil. It features Ticer Technologies' TCRÃ-® thin film copper resistor foil as one or both of clad foils. Suited for advanced multi-layer flex, rigid flex, and rigid PCBs, product comes in range of dielectric thicknesses and resistance levels, with...

Wakeup Receiver has low-frequency, low-power design.

Designed to promote battery life in active tags, AS3932 fully programmable 3D wake-up receiver covers carrier frequency range of 110-150 kHz, including 125 kHz band, and offers wakeup sensitivity of 100 Ã-µVRMS (typ). Its 3 independent receiving channels enable detection of wakeup signal from any direction, and received data can be correlated with pattern programmed in register to prevent...

Busbar-Mount Contactors suit high-reliability applications.

Designed for commercial and military aerospace applications, WB/ZB/HB series feature dust-sealed designs and weigh between 1.25 and 2 lb. Products meet Mil-PRF-6106 environmental requirements for mechanical shock, vibration, and temperature fluctuation. HB series is engineered with ground fault protection, and all power switching solutions are designed for quick-change installation and configured...

Molex Impact(TM) Backplane Connector System Receives 2009 DesignVision Award

LISLE, Ill. - February 09, 2009- Molex Incorporated (NASDAQ: MOLX AND MOLXA) is honored to announce its Impact(TM) backplane connector system has been named as a winner in the International Engineering Consortium's (IEC) 2009 DesignVision Awards. The IEC announced the awards on Feb. 3 at DesignCon 2009 in Santa Clara, Calif. The Impact connector system was selected by the DesignCon 2009 Technical...

The Alltec Protection Pyramid(TM): Lightning Protection, Surge Suppression and Grounding Systems

The Alltec Protection Pyramid(TM) provides a three-step comprehensive facility approach for lightning protection, surge suppression and grounding solutions. Our system begins with the installation of a code compliant, single-point, low resistance/impedance grounding system, sized to carry the full amplitude of a short circuit current safely to the ground. Next, surge protection devices are staged...

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.